Bath with an area of ​​6x6 m with an attic: layout features

Content
  1. Features: pros and cons
  2. Choosing a material for the walls
  3. Layout
  4. Tips & Tricks
  5. Beautiful examples

One of the advantages of a country house is the presence of a bath. In it you can relax and improve your health. But for a comfortable stay, you need a competent layout. An excellent example is a 6x6 meter sauna with an attic.

Features: pros and cons

One of the most significant advantages of such a building is the optimal price. The attic can be a great place to relax for the whole family. Whether it's a home theater, a billiard room, a workshop or a guesthouse - the attic can be used for a variety of purposes, and the terrace with balcony is a great place for privacy. The bathhouse 6x6 meters does not require a lot of space, the organization of the premises is laconic and comfortable. In addition, such a building is original and fits well into the surroundings.

The disadvantages include the high cost of attic structures, difficult roof repairs, inconvenient attic cleaning.

It is important to correctly plan a hydro and vapor barrier system. Otherwise, the air will not circulate correctly. On the ground floor there will be a lot of humidity, while upstairs, on the contrary, the air will be dry. Such changes will inevitably lead to rotting of the base of the bath. To avoid this situation, you need to fix the foil on the ceiling before attaching the binder in the steam room.

Choosing a material for the walls

One of the important decisions during construction is the choice of material for the walls of the future bath. Most often, when erecting walls, timber, foam blocks or bricks are used. Each building material has its own characteristics.

The bar allows air to pass through, it tolerates steam well. This is an environmentally friendly material, therefore it is most often used in the construction of a bath.

But it is worth remembering that it is not frost-resistant, and such a building must be insulated.

The foam block has a low price. It is much easier to build from it than from wood, and it also has a low thermal conductivity. The material is environmentally friendly, moisture resistant and durable. The only negative is that gray blocks do not look as attractive as wooden planks.

Brick walls will be strong and durable. Such a bath can be used at any time of the year. But brick is a cold material.

In this case, the walls must be clad both inside and outside the building.

When choosing a building material, it is also necessary to take into account exactly how the bath will be built. The most common methods are frame and frame.

A log house is one of the earliest construction methods. This is a "tower" made of logs or beams, which are fitted and folded together. Additional finishing is not required, because such a house looks neat. The walls have low thermal conductivity, the structure is lightweight, but requires additional work to seal the cracks and seams between the beams.

Frame construction technology is more modern. It is a supporting structure consisting of a combination of linear elements. This method of construction is faster, and it does not give strong shrinkage, unlike a log house.

Layout

An ideal place for building a bath will be an elevation on the site. Construction near roads should be avoided so as not to attract prying eyes.

When choosing a location, the minimum distances should be taken into account:

  • from other buildings - 12 meters;
  • from the borders of adjacent areas - 3 meters;
  • from wells and wells - 22 meters;

After choosing a place for the future bath, you need to create a drawing.To do this, you can hire an architect. You can also complete the drawing yourself if you are sufficiently qualified in this field. It must have the layout of the first floor with all door and window openings, the plan of the attic and the roof.

On the ground floor, it is better to place a bathroom, a staircase and all the rooms that make up the bath (dressing room, steam room and washroom). In the dressing room, it is worth making a toilet, a place for firewood and a firebox for the stove. For convenience, it is worth installing hangers here.

Right behind this room you can make a washroom with a shower.

If you wish, you can replace it with a small pool or jacuzzi. It would be appropriate to place the portal for the furnace here. The steam room has two- or three-tier shelves and a stove. In this case, the upper shelf should be at least 1 meter from the ceiling.

Due attention should be paid to the stairs. The stepped model is the safest. It is easier to move along such a staircase, but it takes up much more space than a spiral staircase. If there are children or elderly people in the house, the first option is the best choice. The boltsev staircase is also a good choice. It has all the advantages of a stepped model but takes up less space. However, this type requires a strong load-bearing wall to which the support pins of the structure are attached.

The layout of the second floor is more free. The main thing is to decide on the size of the windows and the presence of a balcony (it is not necessary to do it). It is also necessary to organize the possibility of a safe exit to the roof. For convenience, on this floor, you can arrange a bathroom and a kitchen. It is also worth carefully considering the sewerage system, taking into account sanitary standards.

The rest of the attic is a recreation area. The attic floor usually has many broken and straight lines in its layout. This feature should be used for interesting interior design.

When designing a roof, it is necessary to take into account the modesty of the inner space of the attic. An excellent choice would be a broken gable roof or the use of half of the space on the upper level. Additionally, it is recommended to use heat-insulating materials to protect against overheating in summer and hypothermia in winter.

There is another possibility of planning, where the recreation room is located on the ground floor, and the attic is given, for example, for a bedroom.

In this case, the dressing room becomes smaller. From the dressing room you can get to the rest room or the washing room, where there is a shower and a hot water tank. Behind the washroom there is a steam room with a wooden floor and a slope for water drainage. A stove is installed in it, which is heated from the rest room. Doors should be made small (up to 1.8 meters high).

As for the windows, it is better to give preference to plastic options with a double-glazed window. In the washroom, dressing room and steam room, it is better to make small windows, but in other rooms, on the contrary, it is worth taking more space for the penetration of sunlight inside.

Before laying the foundation, the site must be cleaned of dirt, debris, plants and all irregularities must be removed. Next, you need to make the foundation for the bath. Suitable options would be columnar, pile, or tape foundations. A well-laid foundation is the key to a strong bath that will not sag over time. The base for the furnace is built separately from the base.

The presented two layout options are the most common and convenient to use. However, together with the architect, you can think over other options for the layout of the premises. After all the steps described above, you can start building the bath itself.

Tips & Tricks

In conclusion, it is worth giving more a few recommendations to help you in design and construction:

  • It is better to entrust the planning and work to create the building to a competent company.When choosing professionals, you should pay attention to the qualifications of personnel, portfolio, reviews and special equipment. Also, before concluding a contract, it is advisable to communicate with employees in person.
  • The finishing material should be functional and pleasing to the eye. Paying attention to quality and reliability, do not forget about the aesthetic side. There are many finishing materials that combine all these properties.
  • If the construction of a bath is done by hand, it is necessary to carefully follow the technology of work and all the recommendations, otherwise the result can be disastrous (at best, this will turn into a waste of money and building materials).
  • Ideas from the Internet will help create coziness and warmth on the second floor. In the vastness of the "world wide web" there is a lot of great advice on the design of the attic, from the color of the walls to the selection of accessories. The main thing is not to be afraid to experiment.
  • The bathhouse should harmoniously fit into the surrounding environment. What is around the bathhouse creates a certain flavor. The ennobled area around the building will play into the hands of the owner of a country house. It is much more pleasant to observe pictures of beautiful nature from the windows of the upper floor, rather than the depressing view of the gray earth.
  • Don't overload the space. The bath should be spacious and comfortable.

Beautiful examples

The bathhouse with an area of ​​6x6 meters with an attic will be a great addition to a country house and a great place to relax for family and friends. By choosing high-quality materials and observing all the rules described in this article, you can create a truly cozy place that will last for many years and will not lose its original appearance. Below are examples of the design of baths with an attic.

The combination of dark and light wood in the design of a foam block bath looks interesting and unusual.

You can complement the design with columns, platbands, carved front and cornice.

If the bath is made of logs, you don't have to mask them. This design will blend in perfectly with the environment.

With a beautiful roof and natural colors, you can create a unique design that will delight the eye.

For a video review of a bath with an attic, see the next video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture