Features of the construction of a fence on the site

The construction of a fence in the country always has its own peculiarities. It is necessary to take into account the distance to the house and other buildings in the garden suburban area. Only with a careful acquaintance with these circumstances, as well as with how to put a fence in an area with a slope, you can choose the best options.

This option is quite logical to use in the country, especially if it is also a garden plot. In such a case, there is no doubt that a properly executed fence will satisfy basic requirements with a guarantee. The corrugated board has a pleasant balance of lightness and strength. Fastening of sheets is usually carried out on a tubular frame. The ways to insert pipes into the soil differ depending on its hardness and other nuances.

On swampy soil, piles are placed under the corrugated board. In most cases, the supporting structures are backfilled or partially concreted. It is better to order sheets according to individual measurements.

If you need to put something strong and impressive in your summer cottage, then this is the best choice in most cases. Brick and stone are also almost maintenance-free. Usually clinker and silicate bricks are used, rather than simple ceramic bricks. Their advantage is that there is no need for finishing. In this case, the surface can have different colors and textures.

Silicate, unlike clinker, requires the application of a hydrophobic impregnation. Otherwise, it will become intensively clogged. Red blocks are recognized as classics. However, their use is not necessary at all. Experiments with different shades and surface textures are quite acceptable. You just need to monitor the visual compliance with the facade of the house and the appearance of the site.

A natural stone fence is almost as strong as a metal fence, but it goes far beyond it from an aesthetic point of view. Foundations and pillars can be made of both sandstone and limestone, as well as on the basis of granite. Mounting is quite simple. Walls are usually built on the basis of chipped and hewn blocks.

From among the real stones, you can use a bottle. He definitely looks original and creates a positive attitude. With the help of such a stone, it is possible to embody even the most unusual design ideas. Cobblestone is appreciated only for its ease of processing, and in terms of design, it does not represent anything outstanding. Granite is quite beautiful, but it is expensive and can only be worked with very hard, powerful tools.

In addition, you can consider options with:

• dolomite;

• limestone;

• shell rock;

• flagstone.

Of course, you can be proud of the stone barrier for a long time, consider what a beautiful color it has inside and outside. But sometimes a different problem is solved: to fence off the site so that it is simple, reliable and at the same time optimal ventilation is provided. It is easy to guess that among the various types of fences, in this case, it is best to enclose the territory with a netting net. It is, among other things, inexpensive and allows you to enjoy the result in a short time. Despite the appearance of a number of competing solutions, the mesh-netting stands out favorably for its cheapness.

In some cases, the structure is created using not only pillars, but also longitudinal beams. The posts can be made of wood or metal. The second option is more expensive, but more reliable and allows you to guarantee a long service life of the structure.

This is a more modern version of metal fences than a chain-link mesh. On the whole, it looks better and more impressive. Such aesthetic superiority is hardly reflected in the cost. There is a euroshtaketnik of various tones. Manufacturers give a guarantee of up to 10 years, while declaring a service life of up to 40 years.

The Euroshtaketnik, in contrast to the chain-link, blocks prying eyes from the outside. But the similarity is manifested in the same ventilation effect. The degree of shading and closure of the site from prying eyes must be chosen at your discretion. If a single strip is deformed, you can limit yourself to replacing it without completely repairing the section. The height can vary from 1 to 2.4 m, and the width of the blocks is from 8 to 12.8 cm.

And yet, with the objective advantages of metal, wooden structures retain their relevance. For a private house, even for a large cottage, this is almost the best solution. The purchase of the appropriate material is not difficult, and it is quite varied to make an original composition. The assembly of a structure from boards is quite capable of even the most ordinary people.

Plank fences can be easily combined, if necessary, with both stone and forged structures (elements). In addition, the cost of such source material will be inexpensive. However, one must understand that the tree lasts no more than 10 years. Without full processing, it can rot even earlier. And even when using flawlessly processed material, protection is not absolute - repairs will still need to be done often.

You can use options such as:

• chess;

• tyn;

• classic picket fence;

• palisade;

• lattice.

The most important advantage of this material is that it does not rot and does not corrode. Polycarbonate bends well and takes many forms. He's pretty tough. A fence made from it looks advantageous, especially if it is correctly combined with metal and brick parts. In addition, it is worth noting the excellent level of noise isolation, and the delay of ultraviolet rays.

Too thick material should not be taken if you just plan to fence the dacha. But the protection of a permanent home is quite relevant. The best colors are bronze and silver, they look solid and noble.

This is a completely original and, moreover, an affordable option. PVC serves for a long time and does not decompose with water, alkalis, acids, gasoline. Salt solutions and atmospheric influences, microscopic fungi, he also does not care. There are many models of fences based on polymer profiles. Experienced installers can always be found who will supply everything for a reasonable fee. The color of PVC is chosen according to your taste, and if you get tired of it, it is not difficult to repaint the fence.

PVC mesh is an excellent alternative to the chain-link. Despite the lower strength, it will be even more durable. It is also possible to imitate a wicker fence. A plastic fence is also able to reproduce the appearance of a fence based on a picket fence.Finally, a solid plastic fence is also available.

SNiP norms and GOST requirements should be learned very clearly. Otherwise, they can always make an order to demolish the structure at their own expense, and still pay a fine. These standards were not invented just like that, but taking into account the practice of fire protection. According to the law, the distance to the house, to the bathhouse and other structures with windows must be such that the sun's rays freely fall on any point on the surface of the walls. This rule applies even to the distance from the fence to the barn, if the barn itself has at least one small window.

A deaf monolithic fence is placed at least 3 m from the house. If buildings that are easily ignited, made mainly of wood, are being built, then according to the standards, there should be a gap of at least 10 meters. The distance to the barn is at least 1 m. If a poultry house, closed greenhouses are equipped on the land plot, then the gap should be 4 m. The distance to tall trees should be the same. Smaller trunks allow you to move back by 4 m, and the distance along the bush-fence line should be at least 1 m.

Do not give up building a fence on an uneven area. There are special techniques to do this efficiently. In this case, the fence will prevent the soil from shattering. They start by assessing their capabilities and the slope of the terrain. In difficult cases, it is better to turn to experienced builders.

If it is decided first of all to build a reliable barrier around the perimeter of the site so that it does not crumble, it will be necessary to prepare a strip foundation. On top of it, brickwork or natural stone is made out. The design of a purely decorative fence is possible on the basis of a profiled sheet, wood.

You can find different opinions on what the optimal level of the fence will be. And even refer to the fact that its height from the ground is very different in specific cases. But it would be more correct not to provoke a conflict and focus on a standard indicator. According to GOST and SNiP, the construction of fences between private estates of more than 1.5 m is not allowed. This is because the barrier should not obscure plants in other areas.

An important point of preparation is an agreement with neighbors. It is better to agree on all the nuances - the height, the material, the transparency, and other parameters in advance. Not only aesthetics will have to be considered. Very beautiful, but powerful and heavyweight structures are unlikely to be appropriate on soft ground with low bearing capacity. Sometimes you have to find a compromise, given the financial constraints.

Whatever version of the fence it was decided to do, it is necessary to clear the area for it. Cut off the sod and take out the roots of the plants. A hole is dug to a depth of 1.5 m or to the level of freezing. Instead of digging a hole, you can use a garden drill, but you will have to drill to the already indicated depth at least. After drilling, the reamer is lowered into the borehole onto the plow, which allows you to create an anchor expansion. It will also be necessary to prepare protection from soil water.

To correctly make a fence from corrugated board, you must start by choosing a professional sheet. The higher the stiffeners, the stronger the material. In ordinary places, ribs of 8 mm or more are enough. But in areas with intense winds, you need to choose options for 15-20 mm. As for the thickness, then 0.5 mm is quite enough, even if there are doubts.

It makes sense to choose painted rather than galvanized sheet. By installing it, it will be possible to guarantee a longer service of the fence. In many cases, the installation of metal poles will be required. The method of their fastening in the ground is chosen independently.The strongest pillars are placed on the gate.

The pillars are connected with lags or streaks. Use self-tapping screws for metal with rubber washers. Steel hinges are used to secure the gate and wicket. They will have to be welded to the support post in advance. If you do not have experience in welding, it is better not to try to do it yourself, but to turn to professionals.

When calculating the need for professional sheets, one must not forget that their useful and total width are different. The number of pillars is determined taking into account the length of the fence and the width of a single span. The optimal gap between them is 2-2.5 m.

Before starting work, it is useful to check the cadastral documents. This will allow you not to get out of the site. It is impossible to leave a gap of more than 3 m between the posts. It is highly recommended to draw up the drawing on paper, so as not to get confused and confused. The diameter of the pipes (pillars) is at least 5 cm, the walls are at least 0.25 cm thick.

On soft ground, a fence made of profiled sheet is created using piles. The bottom of the recesses under the pillars is covered with sand or fine gravel. Such a pillow must be carefully compacted. The height of the posts is adjusted by reducing or thickening the cushion. It is important to set the support strictly vertically.

Having welded on several pieces of the corner, you can improve the fixation of the underground part. You will have to concrete a little. To make the concrete stronger, rubble or brick fight is added to it. All layers are thoroughly rammed and pierced with a steel bar to eliminate the appearance of air voids. The full set of strength traditionally takes 28 days.

The conductors can be welded or bolted to the brackets. The joining of the lag on the pillars is with a gap of 0.5 cm. Everything must be done exactly according to the level, the readings of which are best followed by the partner. After the completion of the welding work, the scale is removed, the seams are re-welded as necessary and the seams are cleaned again. Then all the joining points are primed and painted.

The installation of the corrugated board itself requires very precise mounting of the first sheet. Be sure to evaluate how much the upper edge can be taken out above the vein. The sheets must be screwed in completely, taking a step through the wave. Each of them is verified by level. Washers on self-tapping screws can neither be pressed down nor loosened.

None of the best fence without gates and wickets is unthinkable. Fortified garage sheds are welded onto the pillars in the selected place. Having hung the frame of the gate and the wicket, then the corrugated board itself is attached to them. Constipation is mounted before this procedure. Pay attention to any deviations from straight lines.

How and from what to build an inexpensive fence, see the video.