Difference between curb and curb

Curbstones separate the driveway, sidewalks and flower beds in all settlements. Depending on the method of laying, the structure is called either a curb or a curb. Some people use the same name for all kinds of divisions, but this is not entirely correct. The same material is used for the manufacture of structures, but there is still a difference between the terms.

It is enough to look at GOSTs to understand exactly the intricacies of structures. Curbs and curbs are used to delineate different areas. For example, a structure can separate the carriageway from the pedestrian zone or the sidewalk from the flower bed. There are precise definitions of the terms.

• Curb - a stone for dividing 2 or more zones. Before installation, a recess is made in the ground, the so-called trough. The slab is sunk into the ground. The curb itself always goes flush with asphalt, tiles, earth or any other material.

• Curb - a stone for dividing several sites. It is not necessary to make a hole in the ground before installing. The lower part should not sink into the soil. However, the curb always protrudes above the level of both zones, for the separation of which it is installed.

It should be noted that the term "curb" itself comes from Russian architecture. In the distant past, special brickwork was used to decorate the front parts of churches. One row of rectangles was laid with an edge.

The curbs were invented by the ancient Romans to protect their roads from rapid destruction. Stones were laid with a height of about 50 cm.

Already in the 19th century, decorative plant borders appeared. Usually they separated paths and lawns, flower beds.

It turns out that initially, the curbs were stone and high, and the curbs were completely living plants. Today, technology has evolved to such an extent that both structures can be made of concrete, marble, metal, wood, plastic, and other materials. On the streets of cities, fences of gray tones are usually installed, however, it is worth noting that the color can be absolutely any and depends directly on the material. The widest choice in the separation of landscape design elements. Strength doesn't matter in this area.

The dividing element is called a curbstone. This material is divided into 3 types depending on the scope of use:

• road - for framing the carriageway;
• sidewalk - for bordering pedestrian areas;
• decorative - for framing flower beds and other elements of landscape design.

There are differences in size. The largest stones are used to separate the roadway from other areas. They have an important functional task. The road stone protects the surface from rapid wear and tear and pedestrians from being hit by cars. In other words, such a design must be able to brake a car that could fly onto the sidewalk.

The material for framing pedestrian zones is smaller. It is needed to reduce wear and tear on the tiled area. And also the design prevents overgrowth of plants. Sometimes paving stones are even replaced with decorative ones and vice versa. The latter type of construction is used exclusively for fencing and additional decoration of landscape design items.

The curb differs depending on the shape of the upper rib. It happens:

• square (right angle);
• inclined at a certain angle;
• rounded from 1 or 2 sides;
• D-shaped;
• with smooth or sharp edges like a wave.

The curb usually has a height in the range of 20-30 cm, the width depends on the area of ​​use and ranges from 3-18 cm. The curb is usually 50 or 100 cm long. Sometimes the stones are broken before installation in order to obtain small elements. The size directly depends on where the material will be installed. Different blocks are used depending on the installation method, manually or with technology.

The curb and curb can be made of material of any color and with different properties. This will directly affect the characteristics and scope of use. There are several most popular options.

• Granite. The material has a wide color palette and belongs to the elite class. Usually used in squares and park areas. And also such stones are purchased for private mansions.

• Concrete. Low cost makes this material the most popular. Moreover, it can be made in different ways, which will affect the basic physical properties. Usually found in settlements to separate different zones.

• Plastic. Flexible and durable material. Usually used when decorating elements of landscape design.

The technology for the production of concrete slabs may differ, but it always complies with GOST. There are 2 options.

• Vibration casting. This is how strong stones are made; during manufacturing, the material receives a fine-pored structure. Concrete slabs are obtained with the correct shape and size. The upper part always has a cladding and an inner side.
• Vibropressing. The stones are less tidy, may have chips and small cracks. Voids are formed inside, because of this, the material is more susceptible to external influences and has low strength. The only advantage is the low cost of such products.

The curb and curb can be made by vibrocasting or vibrocompression. Any side stone has 1 of 3 markings.

• BKR - the shape has a radius. It is used for road surfaces when cornering.
• BkU - the form is intended for framing pedestrian and bicycle areas.
• BkK is a special conical shape.

The fundamental difference lies in the styling method. So, when installing the curb, the stone goes flush, and when installing the curb, the material is laid with an edge that rises above the surface. When laying, observe the main points.

• First you need to make a trench. When installing the curb, the depth should be equal to 1/3 of the height of the stone. If you plan to lay a curb, then the trench is dug to almost the entire height of the material.
• It is important to properly compact the earth in the trench.
• Stakes and thread should be preliminary marking. When stretching, it is recommended to use the building level.
• It is necessary to strengthen the structure. For this, a dry mixture of sand and cement is used in a ratio of 3: 1. It is worth filling the bottom of the trench evenly.
• Raise the thread to install the curb or lower it to mount the curb so as to indicate the height of the structure.

There is no difference in further installation. Grout should be prepared, stones should be laid and seams should be repaired. It is worth noting that you first need to put the structure, and then lay the tiles. Seams should not exceed 5 mm.

The curb has more functional value. Durable slabs not only decorate the space, but also prevent overgrowth of plants where they are not needed. A well-installed structure can prevent shedding of the ground and spreading of the coating. If the track has slabs on 2 sides, it will last much longer than the same one, but without a border.

According to GOST, both types of structures are installed in different zones. The curb is most effective when separating the lawn and sidewalk area. The stones prevent overgrowth of the plants in this case. And also effective use for zoning the pedestrian zone and the roadway, because we are talking about the safety of people and the safety of road surfaces.

The curb separates the street areas. We are talking about sidewalks, parking lots, resting places. In these cases, the aesthetic properties of the curb are best manifested. The functionality is especially noticeable when framing cycling areas. Such an elevation will prevent you from entering the pedestrian zone.