Hotpoint-Ariston washing machine malfunctions and how to fix them

Hotpoint-Ariston washing machines are considered the most ergonomic, reliable and high-quality on the market. Thanks to their high performance characteristics, they have no equal. If unforeseen breakdowns occur with such machines, they can almost always be quickly fixed with their own hands, without resorting to the help of specialists.

A Hotpoint-Ariston washing machine, which has a service life of less than 5 years, should be working properly. If, in the process of operation, breakdowns are noticed, then first of all it is necessary to determine their causes. So, consumers most often notice problems with the drain pump, which quickly becomes clogged with various debris (threads, animal hair and hair). Much less often the machine makes noise, does not pump water or does not wash at all.

Most Ariston washing machines have a modern self-diagnosis function, thanks to which the system, after detecting a breakdown, sends a message to the display in the form of a specific code. By decrypting such a code, you can easily find the cause of the malfunction yourself.

• F1... Indicates a problem with the motor drives. They can be solved by replacing the controllers after checking all the contacts.
• F2. Indicates that no signal is being sent to the electronic controller of the machine. Repair in this case is performed by replacing the engine. But before that, you should additionally check the fastenings of all parts between the motor and the controller.
• F3. Confirms a malfunction of the sensors that are responsible for the temperature indicators in the car. If the sensors have everything in order with the electrical resistance, and such an error does not disappear from the display, then they will have to be replaced.
• F4. Indicates a problem in the functionality of the sensor responsible for monitoring the volume of water. This is often due to poor connection between the controllers and the sensor.
• F05. Indicates a breakdown of the pump, with the help of which the water is drained. If such an error appears, you must first check the pump for clogging and the presence of voltage in it.
• F06. It appears on the display when an error occurs in the operation of the buttons on the typewriter. In this case, completely replace the entire control panel.
• F07. Indicates that the heating element of the clipper is not immersed in water. First you need to check the connections of the heating element, the controller and the sensor, which is responsible for controlling the volume of water. As a rule, replacement of parts is required for repair.
• F08. Confirms sticking of the heating element relay or possible problems with the functionality of the controllers. The installation of new elements of the mechanism is in progress.
• F09. Indicates system failures related to memory non-volatility. In this case, the firmware of the microcircuits is carried out.
• F10. Indicates that the controller responsible for the water volume has stopped sending signals. It is necessary to completely replace the damaged part.
• F11. Appears in the display when the drain pump has stopped giving operation signals.
• F12. Indicates that the communication between the display module and the sensor is broken.
• F13... Occurs when the mode responsible for the drying process malfunctions.
• F14. Indicates that drying is not possible after selecting the appropriate mode.
• F15. Appears when drying is not turned off.
• F16. Indicates an open car door. In this case, it is necessary to diagnose the sunroof locks and mains voltage.
• F18. Occurs in all Ariston models when a microprocessor malfunction occurs.
• F20. Most often appears on the display of the machine after several minutes of operation in one of the washing modes. This indicates problems with water filling, which can be caused by malfunctions in the control system, low head and lack of water supply to the tank.

Hotpoint-Ariston washing machines, which do not have a screen, signal malfunctions in a variety of ways. As a rule, most of these machines are equipped only with indicators: a signal for closing the hatch and a power lamp. The door blocking LED, which looks like a key or a lock, is constantly on. When the appropriate wash mode is selected, the programmer rotates in a circle, making characteristic clicks. In some models of Ariston machines, each washing mode ("additional rinse", "delayed start timer" and "express wash") is confirmed by the light of the lamp with the simultaneous blinking of the UBL LED.

There are also machines in which the “key” door closing LED, “spin” indication and “end of program” lamp are blinking. In addition, Hotpoint-Ariston washing machines, which do not have a digital display, are able to notify the user of errors by blinking the water heating temperature indicators of 30 and 50 degrees.

The most common malfunction of Hotpoint-Ariston washing machines is failure of the heating element (it does not heat the water. The main reason for this is in use when washing with hard water. It often breaks down in such machines and drain pump or pump, after which it is impossible to drain the water. A breakdown of this kind is provoked by the long-term operation of equipment. Over time, the gasket in the filler valve may also fail - it becomes rigid and begins to let water through (the machine flows from below).

Most often, the machine does not work when turned on due to a damaged control module or a malfunction of the power cord or outlet. It is easy to check the health of the socket - you just need to plug another device into it. As for the damage to the cord, it can be easily noticed visually. Only masters can repair the module, since they reflash it or replace it with a new one. Also, the machine may not turn on if:

• faulty valve or clogged hose, due to the lack of water, the equipment cannot start work;
• the electric motor is out of order (the breakdown is accompanied by extraneous noise), as a result of this, the machine draws water, but the washing process does not start.
• Does not drain water

A similar problem occurs most often due to a clogged drainage system, breakdown of a control unit or pump.

This breakdown usually occurs for three main reasons: the motor is out of order (this is accompanied by the lack of rotation of the drum), the tachometer that regulates the rotor speed is broken, or the belt is broken. The performance of the engine and the integrity of the belt are determined by removing the back cover of the machine, having previously unscrewed the screws.If the cause of the breakdown lies not in the engine, but in the malfunction of the tachometer, then it is advisable to call a specialist.

This problem usually arises after long-term operation of the equipment. Sometimes it is observed in new machines, if they are of poor quality or if the load of laundry is exceeded, as a result of this, scrolling of the drum is observed, leading to the slipping of the belt. Besides, the belt can fly off due to poor attachment of the drum pulley and motor. To solve this problem, you need remove the back cover of the machine and tighten all fasteners, after which the belt is installed in its place.

This is considered one of the most serious breakdowns. the elimination of which cannot be postponed. If the machine started and then stopped (the drum stopped rotating), then this may be due to uneven distribution of laundry, due to which an imbalance occurs, a breakdown of the drive belt or heating element. Sometimes the technique twists during washing, but not during the spin mode. In this case, you need to check whether the program was selected correctly. It may also occur the problem is with the control board.

The drum can also stop rotating immediately after filling with water.

The main reasons the Hotpoint-Ariston is unable to draw water may be problem with the control module, blockage of the inlet hose, failure of the filling valve, malfunction of the pressure switch. All of the above malfunctions are easily diagnosed and corrected on their own, the only exception is the breakdown of the module, which is difficult to replace at home.

Sometimes, after loading a wash, the door of the machine does not close. There can be several reasons for this problem: mechanical damage to the door, which ceases to be fixed and emit a characteristic click, or electronics malfunction, which is accompanied by the absence of blocking the hatch. Mechanical failure most often occurs due to simple wear and tear of equipment, due to which plastic guides are deformed. During long-term operation of equipment, the hinges holding the hatch door can also sag.

In the case when washing is carried out in cold water, then most likely the heating element broke... Replace it quickly: first of all, you need to carefully remove the front panel of the device, then find the heating element and replace it with a new one. A frequent cause of failure of the heating element is mechanical wear or accumulated lime.

Often, when the Hotpoint-Ariston washing machine is started, buttons and lights start blinking, which indicates a breakdown of the control module. To fix the problem, it is enough to decipher the meaning of the error code on the display. The signal for urgent repair is also the appearance of extraneous noise during washing, which usually appear due to rust of parts and failure of oil seals or bearings. Counterweight problems can sometimes occur, resulting in noisy operation.

The most common malfunctions also include the following symptoms.

• Technique flows... It is not recommended to diagnose this breakdown on your own, since a leak can then break the electrical insulation.
• The Ariston has stopped rinsing the laundry. This may be due to a problem with the electric heater. When it is broken, the temperature sensor does not transmit information to the system that the water has heated up, and because of this, the washing process stops.
• Washing machine does not wash away powder... You will often notice that the detergent powder has been rinsed out of the compartment, but the rinse aid remains. This occurs due to clogged filters, which are easy to clean with your own hands.In some cases, the powder will not be washed off if the water supply mechanism is broken, which leaves the conditioner and powder in place.

Whatever the breakdown of the Hotpoint-Ariston washing machine, you need to immediately diagnose its cause, and only then proceed with the repair with your own hands or call specialists. If these are minor malfunctions, then they can be eliminated independently, while problems with the electronics, control system and modules are best left to experienced specialists.

For error F05 in the Hotpoint-Ariston washing machine, see the video below.