Features and characteristics of high-pressure motor pumps

Content
  1. How does it work?
  2. How to choose?
  3. Views

A motor pump is a water pump that sucks in water itself. It is powered by an internal combustion engine. Sometimes it can be an electric motor.

How does it work?

The technique works according to a specific algorithm.

  1. The diaphragm or impeller is driven by a motor.
  2. In a rarefied environment, water fills the hose (self-priming system), then flows into the discharge pipe.
  3. The autonomous engine system makes it possible to work without a mains supply. Accordingly, the technique can be used for irrigation, water supply, extinguishing fires, etc.

The unit operates only within a certain area, since the length of the supply cable is limited in size

Motor pumps are distinguished by their performance. Water supply can be carried out within a radius of hundreds of meters. Such pumps are indispensable in the household.

Water rises horizontally and vertically. The calculation is as follows: 1 meter of vertical water rise per 10 meters of its horizontal direction.

Fuel is consumed very economically. If the performance of the unit is low, then up to 2 liters will be spent. High performance pumps use 4-5 liters per hour.

How to choose?

The pump for the pump is selected taking into account the characteristics of the terrain and the composition of the water. Only clean water is poured into the centrifugal pump, and dirty and viscous liquid into the diaphragm pump. Pressure pumps can be "filled" with petrol, gas and diesel. Petrol - universal, as they can be converted using a reducer module for gas.

The engine of the units has the same design. The gasoline engine is cheaper than other types. It works silently. However, such motor pumps consume a large amount of fuel, and their resource leaves much to be desired.

There are tremendous advantages to a 4-stroke motor, which increases the performance of the unit. The gas motor pump works from a propane-butane cylinder or from a gas pipeline. Fuel is consumed 2 times less than in gasoline pumps.

For large volumes of work, a diesel engine is used. It costs more than a gasoline one, but its motor resource is 5 thousand hours.

Views

Motor pumps are classified according to the operating conditions. There are those that are used to pump water without impurities and slightly polluted, water with a high content of impurities.

To draw clean water, use a motor pump with a 2-stroke engine. For 1 hour, you can pump 8 cubic meters of water. The units are lightweight and small in size. They are popular with summer residents and villagers.

High pressure motor pumps are often referred to as "firefighters". This technique extinguishes fires and can also supply water over long distances. The motor pumps already have a 4-stroke gasoline or diesel engine. The water consumption is 600 liters per minute, and the water jet can rise up to 60 meters. Suitable for lots of land, far from water. The motor pumps are compact and easy to use.

If a pump is needed for processing dirt, then motor pumps are used, which ensure rapid suction of large particles. Such devices can pump 2 thousand liters of mud in 1 minute. The height of the water jet is 35 meters. The pipes in diameter reach an average of 50-100 millimeters.

For a summer cottage, units are often purchased that pump 130 liters of water in 1 minute. The rise of the liquid can be up to 7 meters.For a country house, these indicators are equal to 500-800 liters of water with a liquid rise height of 20-35 meters.

To drain the area and pump out the septic tank, use a motor pump that pumps 1,000 liters of liquid per minute and raises it to a height of 25 meters.

For long-term use of equipment, it is better to use components from leading manufacturers: Honda, Subaru, Champio, Huter, etc.

In modern conditions, it is important to quickly and promptly extinguish the fire and prevent it from spreading to the site. This can be done using a motor pump. Water, directed under pressure, extinguishes the fire, covers the surface of the hearth with a film that slows down smoldering.

High-pressure motor pumps are able to extinguish a fire in remote areas, in houses, high-rise buildings.

The fire engine pump is equipped with a non-self-propelled chassis, a high-power centrifugal pump, and a gasoline engine.

This technique is started with an electric starter or manually. The engine can run from 30 minutes or more.

The motor pump starts immediately after refueling. The pump operates under high pressure, consumes 1400 liters in 1 minute, and delivers a stream of water up to 80 meters. Thus, a motor pump can extinguish fires and fires at a high combustion temperature, while taking into account the significant height of the water flow.

Such units can be transported on a trailer, cars, ATVs. Some models can be carried by hand. These features make it possible to extinguish a fire even in hard-to-reach and impassable places. The unit draws water from a natural reservoir, of various capacities and a well. Modern technologies allow motor pumps to draw liquid from a depth of up to 8 meters.

Fires are extinguished with motor pumps at enterprises, with their help they pump, pump out liquid, for example, from wells and basements. It is impossible to clean sewers with a high content of sand.

So, modern motor pumps are multifunctional in terms of characteristics, compact, practical and durable in use. The main thing is to understand the principles of operation of this device.

For example, the time of using the equipment specified in the instructions cannot be exceeded. This will prevent early "wilting" of the equipment.

An overview of the Sadko WP-5065p high-pressure gasoline motor pump is in the video below.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture