Polymer coated mesh

The polymer mesh-chain-link is a modern derivative of the classic braided steel analogue created by the German inventor Karl Rabitz. The new version of the chain-link is used to create cheap but reliable hedges that are resistant to external factors.

A special feature of the polymer-coated chain-link mesh is its decorative function, which is not available for ordinary steel mesh of this type. The plasticized chain-link is made using steel wire technology, but has a protective polymer layer (plastic). The main advantage of the PVC-coated chain-link is a wide range of colors, which makes it possible to give fences a more aesthetic look.

Moreover, it is resistant to different climatic conditions. The polymer coating of the chain-link prevents corrosion and does not fade in the sun, does not need additional painting. Metal elements retain their performance throughout their entire service life. At the same time, a fence made of a polymer chain-link has a completely democratic cost, thanks to which it is available to a large segment of buyers.

Polymer-coated mesh is produced by the same method as a standard metal mesh made of soft wire from low-carbon steel, in accordance with GOST 3282-74. At an additional stage, the wire is covered with a protective polymer layer made of polyvinyl chloride. Modern PVC coatings are able to withstand temperatures ranging from -60 ° C to + 60 ° C. It is noteworthy that in this case the coating does not deteriorate and reliably protects the base material. The polymer layer also serves to give the product an excellent glossy finish.

PVC is characterized by elasticity, due to which the integrity of the polymer coating remains unchanged under various deformations. The mesh protected in this way is not affected by salty sea air, high humidity, UV rays. The chain-link remains in its original state for a long time. Even in harsh climates, the polymer-coated mesh is guaranteed for at least 7 years.

The material is weaved on special machines, working with one or more wires in parallel. Modern equipment can be used to produce both small volumes of products and minimal batches. It is possible to locate production in small areas. In the process of weaving, flat wire spirals are interconnected, and then bent around the edges.

A polymer composition is applied to the finished wicker product, which solidifies and turns into a reliable barrier to moisture, frost and sun. Plastic coating is applied to both conventional and galvanized wires.

The mesh in polymer is supplied in a compact euro-packing or rolled up in rolls according to the standard (“classic” type). The polymeric coating of the steel mesh can contain coloring pigments of different shades. Colored wire is even made individually, in a shade according to the customer's preference.

A metal mesh is produced, covered with a polymer layer, from heat-treated low-carbon wire. It can be galvanized or non-galvanized.

A distinctive feature of the plastic chain-link is that thanks to polymers, the fence is painted in almost any shade. This factor facilitates the task of decorating a summer cottage. For example, if you need to choose a fence to match the overall landscape design.

The green chain-link is most often used as a land survey at a summer cottage and the like. And red and other bright options often surround football fields, parking spaces, playgrounds.

Brown PVC mesh with a fine mesh is a frequent choice of gardeners. The advantage of the product is that it can be from 1x10 meters (where 1 is the height, 10 is the length), up to 4x18 meters (similarly) and does not need to be re-painted.

Fences in the form of a chain-link mesh will be needed where it is necessary to install a budget, but high-quality fencing. Since the PVC-coated chain-link shows resistance even in high humidity, it is preferred to use it as a fence in areas close to the sea and woodland. It is used not only in the agricultural sector, but also in private summer cottages, for surveying between neighboring territories.

And also it is a popular material for the manufacture of fences for parking lots, preschool institutions, children's entertainment complexes. The scope of application of the PVC chain-link does not end there. The mesh in the polymer does not create a continuous shadow and does not interfere with air circulation. Therefore, it is often used in garden plots. The fact that such a fence lets in the sun's rays and does not restrain the flow of air cannot be attributed to an advantage or a disadvantage. It all depends on what functions are assigned to it.

Polymer is not an ordinary plastic that has little resistance to mechanical damage. Above the chain-link with a polymer coating, you will have to work hard to damage it. Therefore, such a hedge is at a great price, and the demand for it is great. Here it is only important to choose a fence in accordance with the requirements of GOST.

The strength of the mesh depends on the thickness of the wire used in its manufacture. The strength indicator is also influenced by the size of the cells themselves. The smaller their diameter and wire thickness, the more unreliable the design. The price for it is certainly more affordable, but is such savings appropriate in this case? The netting is more dense, woven from thick wire with small cells.

There are several indicators that the buyer relies on when choosing.

• The surface should be as flat as possible. It is important that there are no bumps, drops, sagging or gaps.
• In a high-quality mesh, made on a machine, and not handicraft, all cells are the same in shape, with smooth edges.

It is important to carefully inspect the product for damage and dents. If the fence is deformed, after the fence is erected, the defect will become noticeable. In the finished version, this cannot be fixed. For a more aesthetic look, the netting is sometimes placed in frames. The choice of color, cell size and the chain-link roll itself depends on the goals and budget of the buyer.