Features of click profiles

This article describes the main features of click-profiles for frames and stands. Describes aluminum snap-on and plastic snap-on profiles, a 25 mm pillar system and other options. Advice on selection is given.

Click-profile is the traditional name for the aluminum structure, inside which the image is fixed. To insert a picture there, you need to open the perimeter of the product. Further, a photo or other image is rigidly fixed on the back of the frame. Removing the rear wall and pressing it against the glass is not required.

This method is very valuable for advertising and exhibition projects. There, the constant updating of information is extremely important. Such panels are often placed on stands and are used in pavement signs for posters, for posters and leaflets, for other similar materials. But their relatively high price hinders their widespread use. It is also worth noting that you will have to cut the product very carefully and observe the regular angle as scrupulously as possible.

Most often, the strips are cut in a closed state. Consider how they will be placed on the wall. When the cut is done correctly, the profile cover must be opened - and the cut must be made again on this cover. Otherwise, opening this element in assembled form will be almost unrealistic. Instead of a manual hacksaw, it is more correct to take miter saws or milling cutters for processing aluminum alloys.

The corners help to assemble the frame from the click-profile. Poster backs are obtained using:

1. plywood;

2. polyvinyl chloride;

3. hardboard.

In some cases, the profile is mounted on ready-made bases. By default, the profiles are attached to each other with corners. They are inserted into the grooves and fixed with screws. This technique also helps in the formation of a thin light box, illuminated from the inside. One way or another, with the correct procedure, an externally elegant and neat product is obtained.

The applied image can be brought closer to the person, which allows you to attract maximum attention. Due to the variety of dimensions, they can be installed in a wide variety of rooms. Reliable protection against precipitation or dust clogging is guaranteed. The picture is almost impossible to scratch. It is a lightweight but reliable design.

Almost all click profiles are made from aluminum alloys. Additionally, an anodizing layer is applied. The result is a consistently perfect look. The dimensions of most click profiles are clearly standardized. In some cases, custom-made products are used.

Aluminum products with frames conform to the standard:

• 20 mm;

• 25 mm;

• 32 mm;

• 45 mm.

The choice of the color of the click-profile and its frame is made at your own discretion. An important difference also concerns the type of fixation. Known:

• angle connector;

• decorative connection;

• hardware fasteners (with spring).

The aluminum snap-on profile block is available from a wide variety of companies. Typically, such components are immediately included in the delivery set of information boards and similar products. The difference between them concerns the size of the structure. Winged metal models can have a two-sided appearance. In some cases, it is more practical and more convenient to use the plastic version with a latch.

The main point is taking into account the angles suitable for the room and the optimal fastenings. Both obtuse and rounded corners are allowed. The choice between them is a matter of personal taste and technological expediency. Standardized dimensions range from A0 to A5. It is also possible to use images of other sizes.

Other recommendations:

• take into account the color of the profile and frame;

• remember how important the catchiness of the picture is;

• check the quality of the construction material used;

• find out how reliable the fasteners are;

• do not seek to buy the cheapest product.