How to choose a plasterboard filler?

Drywall is an excellent building material that many people use today. The products are relatively inexpensive, so they are available in any store. But, regardless of this, the material should be handled carefully, since it is fragile. To improve the strength and decorative characteristics, plasterboard is very often covered with a putty. There are several types of such solutions, so it is important to take into account certain nuances of each of them when choosing mixtures.

Drywall is a sheet material composed of a filler (gypsum) and an outer retention layer (paper). The sheets are characterized by an even surface, which attracts many builders, as this speeds up the alignment procedure.

But the use of putty on top of such a product is mandatory.

This is due to several features of the material:

• The ends of the sheets are thinner than the entire main sheet. Therefore, when several elements dock in these places, a small depression is formed. It can drastically affect the decorative look of the finish. Therefore, experts recommend filling it with special solutions.

• Fastening of drywall takes place on a previously prepared frame. But the base can also have small differences, which will not allow you to get a perfectly flat surface after joining. Sometimes the level of the sheets may differ by 1 cm. This deficiency can be corrected only with the help of a full-fledged putty of the entire material.
• Drywall has poor strength, so installation may be accompanied by cracks. These places are closed up and strengthened with the help of solutions and a special polymer mesh.

Putty is a mixture that is designed to level various surfaces and eliminate microcracks. Drywall can be coated with various compositions that differ in technical parameters and operating conditions.

Depending on the purpose, the putty for such materials can be divided into several subtypes:

• Starting lineups. They are used for the purpose of rough leveling the bases. They are distinguished by the presence of large fibers, which do not allow obtaining a perfectly flat plane. This type of mortar is used to seal large cracks, seams and other damage in places where the smoothness of the surface is not of particular importance.

• Finishing putty. Fine-grained materials perfectly level the top layer, creating a uniform surface. But these products do not allow a thick layer to be applied, which requires preliminary leveling of the sub-base. After drying, the mixture turns white, which allows it to be coated with paints or other similar mixtures.

• Versatile products. Compositions of this type are used to solve any problems associated with plastering drywall. Mixtures are not always suitable, as they have a coarser structure than finishing solutions, and this does not allow you to control the evenness of the protective layer.

Depending on the consistency, drywall putty can be divided into 2 main groups:

• Ready. The mixtures are sold as semi-liquid solutions that can be applied directly to the material. The disadvantage of such formulations is their high price and the impossibility of re-using the product after some time after opening.

• Dry. Putties of this type are produced as dry mixes. To prepare them, you just need to add a certain amount of water and mix thoroughly. Today, this type of product is very popular. You can use dry mixes in parts, which allows you to control the consumption.

Plasterboard putty is made on the basis of various materials.

Depending on the composition, 3 types of such products can be distinguished:

• Plaster putties. If the composition of the material includes gypsum, which is also present in drywall, then these products can be considered the most suitable for finishing such coatings. Putties are completely safe for humans, as they consist of natural ingredients.

The hardened mortar is characterized by its durability and fast drying speed. But gypsum absorbs moisture well, which can lead to cracks in the screed. Therefore, experts do not recommend using them in bathrooms and other rooms with high humidity.

• Cement mortars. The putty is moisture resistant, so it can be installed almost anywhere. Also, the material easily tolerates high temperatures, but at the same time dries for a long time. Experts recommend using cement putties in the bathroom or kitchen. To obtain a high quality and even finish, the mixture is applied in several thin coats, which are easier to control.

• Polymer putties are made on the basis of various polymers, which makes it possible to impart the necessary physical properties to the material. Elastic acrylic putty has a high level of safety.

The products are versatile as they can be used in domestic and industrial premises. The protective layer resists moisture well, which is very important for drywall, which quickly absorbs water. But it is used relatively rarely, since the material has a high cost.

The quality of the putty depends not only on its composition, but also on the company that produces it. The modern market is saturated with many options for these products, among which there are several main manufacturers:

• Knauf. Putties of this brand are distinguished by an optimal ratio of price and quality. The company produces many modifications of solutions, among which the Fugen and Uniflot models can be distinguished. The first type is made on the basis of plaster. The mixture dries quickly, so it is very often used for gluing drywall sheets to other surfaces.

Uniflot putty is moisture resistant, as it contains cement. The mixture does not shrink, and also has a high ductility with a minimum likelihood of cracking.

• Volma. The company produces gypsum-based materials. They are used to level sheets and seal cracks. The lineup is represented by several brands that differ from each other in composition and physical properties.

• Ceresit. Many types of solutions are produced under this brand, which are of high quality and versatility. Especially, polymer-based mixtures should be highlighted.

Buying plasterboard putty is a daunting task.

To make the right choice, there are several factors to consider:

• The quality of the material. This characteristic depends mainly on the manufacturer of the putty. Therefore, before purchasing, it is advisable to familiarize yourself with the reviews of builders about specific companies.Likewise, you can find the best value for money.

• Operating environment. Many putties are intended for dry rooms. This often includes gypsum-based solutions. For unheated buildings, only a cement or polymer mixture is needed that can withstand temperature extremes and high humidity.

• Finishing quality. Wall surfaces can have large drops, requiring a thick layer of mortar. The best option here is gypsum or cement putty. If only the finishing layer needs to be formed, then polymer-based formulations are best suited to this.

When choosing, you should also take into account the unevenness of the walls, which will affect the consumption of material. Many experts recommend puttingty the ends with a corner. This technology requires the use of compounds capable of qualitatively fixing the product on drywall.

Before applying the putty, it must be properly prepared. This applies only to dry compositions, since you can immediately cover drywall with ready-made mixtures after purchasing them.

When mixing water and putty, you should follow a few simple rules:

• Use only the proportions of water and mixture recommended by the manufacturer. This will allow you to get a solution of the desired consistency.

• Add dry foods to liquid, not vice versa. When you add water, small lumps will remain underneath the mixture, which will be difficult to stir and turn into a homogeneous mass.

The technology for applying putty on a drywall sheet consists of the following sequential operations:

• Primer. For such materials, special solutions are used that do not destroy the structure of the paper. If too aggressive mixtures are used, then the strength of the structure may be compromised.

• Preparation for puttying. Sachala should check if the screws are sticking out on top of the drywall sheet. It is important that their heads are slightly recessed into the material. After that, you need to cut off the edge of the product at the joints of the seams to form a depression. This approach will additionally reinforce these areas.

• Puttying. The process begins with sealing the seams between the sheets. It is important to evenly distribute the solution within the pits in order to end up with a flat surface. In some cases, you will have to apply the mixture in several layers. In a similar way, pits formed from self-tapping screws are closed up.

• After that, puttying of the corners is performed. For their additional reinforcement, metal corners are used, which are applied to the ends of the drywall. Fix these structures with a solution, trying not to move them from their place.

• The procedure is completed by applying the mixture over the entire surface of the sheet. For such purposes, a large spatula is used, with the help of which a solid screed of a certain thickness is formed.

How to putty drywall, see the next video.