How to remove paint from a bathroom wall?

If you decide to re-equip a bathroom with a Soviet-era renovation, then you will definitely face the problem of removing old paint. To remove dried enamel, many different techniques are used, differing in complexity, effectiveness, duration and set of tools.

Today, renovation professionals use ingenious techniques to remove paint that has stuck to a wall for decades. To achieve the desired effect, the following tools are used: a burner, spatulas, knives, axes, grinders and much more.

The process of cleaning old paint is laborious and time-consuming. During work, a lot of dust and debris accumulates in the room. Consider the health hazard from toxic components in the paint. The work is complicated by the unpleasant odor and the significantly limited space of the bathroom.

Before choosing the optimal cleaning method, it is necessary to accurately determine the following aspects:

• material opportunities;
• the presence of special tools (in the event that you are going to carry out the work yourself, without the involvement of specialists);
• composition of old paint;
• the thickness of the enamel layer;
• base (a concrete wall is considered the most difficult to clean, especially if it is necessary to work with oil paint).

Be sure to consider the density of the material from which the wall is made. Some effective techniques can cause severe damage to the substrate.

You can peel the paint off the wall using mechanical methods. For work, you will definitely need various tools: both electrical and manual.

During a major overhaul, spatulas are indispensable. Using this tool can completely remove old paint from the room, but remember that this is a very time consuming method that will take a long time. Among the advantages are accessibility, minimal noise during operation. A huge amount of dust, as when working with electric tools, is not collected.

With a spatula, you can reach hard-to-reach places. No professional skills are required, so the method is great for beginners.

You can use a small ax with a sharpened blade to clean the bathroom walls faster. Compared to the above option, there will be much more noise in the process, but less effort will be needed due to the increased productivity.

First, notches are left along the painted surface, located close to each other. The greater their number, the easier it will be for subsequent removal. After the enamel is removed with movements from top to bottom. Work carefully and slowly. In this case, the force of the blow with the ax is not decisive.

The technique is more profitable compared to the use of electrical devices due to less dust and debris formation. This procedure requires great stamina and physical strength, as well as experience with the instrument. The method is recommended for use on plastered surfaces.

Instead of an ax, you can use a mason's pickaxe. It is more convenient and safer to work with it, and the level of efficiency is the same as that of an ax. The disadvantage of this method is that not everyone has such a tool, but it will not be difficult to find it in any specialized store.

Using a power tool will help remove paint as quickly and efficiently as possible. Among the large selection of special equipment, a grinding machine with a diamond cutter is most often used. And also the craftsmen make a choice in favor of an impeller and a cutting wheel for concrete. Often, a perforator and a grinder are used in the work.

This is one of the most effective techniques for cleaning a concrete wall. Be sure to follow the safety precautions when working with a power tool. Protect the respiratory tract with respirators, as well as acquire special clothing and accessories: gloves, goggles, etc.

Various chemical compositions are also highly efficient in their work. The modern market offers a huge variety of solvents. The composition is applied to the paint with brushes or a roller. It is left for a certain period of time for the desired effect.

Remove soft enamel with a spatula. Most often, workers choose the well-known acetone or the composition of "White Spirit". Trace soda and "liquid" glass are popular.

Solvents from organic components have proven to be effective and affordable, however when using them, you need to familiarize yourself with some of the features.

• Respiratory protection required. Volatile toxic substances negatively affect health.

• Each layer of paint must be treated with a solvent.

• Improper use of the formulation can affect the subsequent application of the colorant.

• Work in a well-ventilated area. A standard bathroom in a multi-storey building has no windows, so the doors must be open. Place fans in the room if necessary.

• Children, pregnant women and animals should not be in the house while working.

• Dispose of the remaining composition under the clear guidance of the instructions.

Of the chemical methods for removing paint, the use of inorganic components is also common. This is quicklime or soda ash. The required mixture is easy to prepare at home: 400 grams of baking soda is mixed with 1.4 kilograms of lime. Before application, the composition is stirred with the addition of water. In terms of consistency, the composition should resemble thick sour cream. The resulting mixture is applied to the wall and left for about 12 hours. After that, it is removed without much effort using additional tools, for example, a spatula.

Old enamel is also removed with a layer of "liquid" glass. As soon as the composition dries, it is removed along with the particles of the old coating.Despite the effectiveness of modern inorganic solvents, be patient. The process has its own characteristics and nuances.

Water-based enamel is called water-based enamel. Due to a number of technical and operational features, it is often chosen when decorating residential premises. Despite the fact that the composition is based on ordinary water, it is almost impossible to remove the old coating with the help of special liquids. Due to its high stability and wear resistance, the enamel retains its structure even under the influence of aggressive components.

Experts have made a number of recommendations, to which it is recommended to listen carefully before removing the layer of water-based paint.

• Moisten the wall with warm water before starting work. Use a large roller. Moisture and temperature will make the enamel more elastic and soft. The thoroughly moistened surface is left for a while so that the paint layer begins to swell. The removal process is completed with a spatula. This is a convenient and safe method for cleaning the ceiling, as it is difficult, inconvenient and even dangerous to clean with electric tools.

• During the drying process, the cleaning efficiency decreases. The required humidity should always be maintained. In this case, the work will be easier and faster.

• To avoid staining the floor covering when removing, cover it with plastic wrap, newspapers or a thick cloth.

• If the desired result is not achieved, use a grinder. The tool will do a great job, but after use, the room will be covered with a layer of dust. Be sure to use protective clothing and accessories.

Each master applies one or another method of removal, depending on various factors: the composition of the paint, the size of the room, the timing of the work, and much more. At the same time, many improvised methods for removing enamel have been developed. They will definitely come in handy if you do not have the necessary composition or tool at hand. Let's dwell on the most effective and popular methods.

• Iodine. The well-known chemical element is used not only in the medical, but also in the construction field. A solution based on this component has established itself as an effective softener. It can be prepared without any problems at home by dissolving 200 milliliters of iodine in a bucket of water.

• Destroyer. The above product can be purchased at a hardware store. It is prepared according to the attached instructions. This process does not require significant physical effort, but it will take a long time. The composition is applied to the wall and wait until the paint becomes loose and soft. Then it is removed mechanically.

• Soap. The soapy water can help reduce the time and effort involved in removing old paint. Thick and fluffy foam does an excellent job of softening. After prolonged exposure to the composition on the enamel, it can be removed with a regular cloth.

• Thermo. The thermal method by burning is used very rarely due to the high danger. Most of the masters completely abandoned this technique altogether. In addition to the fire hazard, toxic elements are released during combustion.

In the next video, you will clearly see how to remove old paint from a concrete wall.