Finishing putty Vetonit: types and composition

Decorating walls and ceilings provides for their perfect alignment. For these purposes, many professional craftsmen choose Vetonit finishing putty. It is characterized by consistently high quality and ease of use. The variety of types and compositions allows for the interior decoration of different substrates.

Putty from the manufacturer Weber Vetonit is a building mixture widely used for finishing works. The material is suitable for dry rooms with low humidity. However, there are varieties of moisture-resistant building materials on sale.

It is one of the best finishing solutions today. Various types of composition are successfully used for wood, concrete, stone, as well as drywall. The dry mixture has a gray-white color, a weak specific odor, a fine fraction (no more than 0.5 mm), which makes it possible for optimal adhesion.

With the help of this material, you can successfully eliminate various defects (cracks, potholes, crevices). The putty is the finishing one. This means that after processing and drying the surfaces, you can start painting or wallpapering.

Restrictions to use, depending on the composition, are high humidity, as well as temperature conditions (+ 10 degrees inside the building). This is because the performance of the material may deteriorate. Moreover, it may start to turn yellow.

The Vetonit mixture, which has become popular, is produced by Russia. There are more than 200 branches of this international construction company known abroad.

The finishing putty combines two main components. It is a filler and binder. The first is sand, limestone, cement and even marble. A special glue made of polymer compounds is usually used as a connecting link. It is designed for better adhesion and deep penetration into the surface.

The consistency of Vetonit is of two types. You can purchase the material in the form of a dry powder for mortar or a liquid mass prepared for application.

Depending on the binder present, the polymer putty made of composite plastic, cement putty, and organic composition differ. A large assortment provides a lot of possibilities for interior decoration.

There are several varieties of Vetonit, differing in composition, properties and purpose:

• "Vetonit KR" - a mixture created taking into account the use in rooms with low humidity. The mixture is made on the basis of gypsum and cement on organic glue, after leveling it must be covered with wallpaper or paint.
• Vetonit JS - polymer putty for all types of substrates with high adhesion and resistance to cracking. It contains microfiber, which gives the material extra strength. Unlike other products, it is used for sealing joints.

• Crack-resistant, ductile and durable polymer compound Vetonit JS Plus it is used both under tiles and under plaster. The composition is effective for processing joints.
• At medium humidity, a mixture can be used. "Vetonit LR + silk" or "Vetonit LR +". It is a polymer material filled with finely ground marble. "Vetonit LR Fine" designed specifically for subsequent painting.

• "Vetonit VH", "Vetonit VH gray" applied under tiles, wallpaper, paint. This type is intended for concrete, expanded clay, gypsum plasterboard. The aggregate is limestone and the binder is moisture resistant cement.

All types of mortars are almost universal, used for construction work and repair of various types of premises.

Vetonit formulations, suitable for rooms with high humidity levels, have their own subtleties in application:

• best of all, the solutions lie on gypsum and drywall, as well as on aggloporite, expanded clay and other mineral surfaces;
• despite the fact that due to the small fraction, the leveling is carried out as much as possible, it is undesirable to lay tiles on Vetonit (except for certain types of product);
• do not apply the mixture on surfaces previously treated with self-leveling compounds;
• It is recommended to seal the joints and seams between the slabs made of gypsum plasterboard fragments with special putties of the JS category, they are also used if the finishing, interior decoration of bathrooms, pools and saunas with tiles is required.

Mixtures can be applied not only manually, but also by a mechanized method. By spraying, the compounds can be used even for difficult substrates. So they perfectly cover wood and materials that differ in porosity. An important condition is that the application should take place on a thoroughly cleaned and degreased surface.

The advantages of the Vetonit collection are largely due to its composition, technical and operational characteristics.

Main advantages:

• environmentally friendly, safe composition that includes only natural ingredients;
• assumes various methods of application;
• dries quickly enough (no more than 48 hours);
• has increased adhesion to most substrates;
• economically beneficial consumption (only 1.2 kg per square meter);
• distribution on the surface excludes the presence of drops;
• subsequent grinding is done without dust;
• due to the coating with this product, the strength and performance properties of surfaces are increased;
• affordable price.

You can continue to work with the prepared solution throughout the day, and drying largely depends on the thickness of the applied layer, air temperature, and its dryness.

Construction and repairs require flawless alignment of walls and ceilings, but if a powdery mixture is chosen, it must be diluted correctly.

Instructions for use are usually found on paper packaging. It indicates the exact proportions of water and building product, as well as the conditions for the maturation of the solution and the time of its action.

Usually a package of 25 kg is taken for 9 liters of water at room temperature. The mixture is poured into water and stirred until a homogeneous thick consistency. After it is infused (within 15 minutes), it is mixed again using a construction mixer. The solution must be used no more than a day. The admissible layer of putty is 5 mm.

It is worth noting that the nuances of the dilution of different types of Vetonit putty may differ slightly. Storage should be carried out in a dry, dark and cool place.

Putty is applied either by spraying with special equipment or manually with spatulas of different sizes. For construction work, you will need a plastic container, a grinding and planing machine, rags, and a set of spatulas.

Workflow order:

• surface preparation consists in removing old wall coverings, paint, removing greasy stains, rinsing and drying the surface;
• then all the irregularities are indicated - the bulges are cut off, and the depressions are marked with chalk or pencil;

• grooves and cracks are sealed with a medium and long spatula, and the solution is taken on it as much as is needed for one movement;
• drying should be done in a natural way with closed windows and doors (except for interior doors);
• the final putty is applied in the thinnest layer, then, when it dries, it is passed with an abrasive and polished, additionally leveling the corners with a suitable spatula.

The consumption of the product is very economical - about 20 kg of material is needed for 20 square meters of area.

Professional builders say that this brand is deservedly respected and considered one of the best. It is noted that the ceilings treated with Vetonit LR + compounds do not need further finishing. The color of the dried filler remains almost white. In addition, it can be applied in two or three coats. And the mixture "Vetonit KR" can be used without a previous primer.

Many are pleased that there are also waterproof compounds that are not afraid of water vapor, which can be used for the kitchen and bathroom. Any of the products of this brand shows high strength, durability and complete health safety, which favorably distinguishes them from building mixtures from other manufacturers.

For information on how to properly apply Vetonit finishing putty, see the next video.