How thick should a kitchen countertop be?

The kitchen countertop is the most important place in the work area for the hostess. This surface is exposed to hot steam, splashes of moisture and various cleaning chemicals. Therefore, it is important to choose the correct thickness and material of the surface of this element.

When the question arises of purchasing a kitchen set, many people have a desire to have not only a beautiful, but also a unique option. In this case, it is worth considering a nuance: kitchen countertops come in standard sizes and custom-made. The latter can have different sizes and individual shapes, they are much more expensive. The most common option is to buy a ready-made headset to which the table top is fitted. For the right choice, it is worth considering the following criteria:

• area of ​​the room;
• convenience of fasteners;
• material and its quality characteristics;
• aesthetic appearance.

As a rule, for the manufacture of countertops, MDF or chipboard is most often used. The first option is 28 or 38 mm thick. This also applies to individual orders. Such material is inexpensive and has many colors. If you need corner countertops, MDF will not work as the joint is very noticeable. Since this is a natural material, only paraffin or linglin is used for gluing. Chipboard is a chipboard that is covered with a layer of laminate. Formaldehyde is used in the production. When choosing, you should pay attention to the front edges. If they differ greatly from the place of the cut, then this is an indicator of poor quality.

Another popular material for countertops is wood. Planks are made from it and glued together with carpentry glue. The standard thickness is 18–20 mm or 40 mm. The first option is quite thin, the second is thick. The material can be easily adjusted to the required dimensions by yourself. You can choose both solid wood and glued board. The choice is based on personal preference, since the quality and service life of the product depends more on the type of wood.

The most expensive material for the production of countertops is considered to be natural stone: granite, marble. The stone surface of marble is 20-30 mm thick, the best is to use 26 or 28 mm. Granite countertops are slightly thicker: 30-50 mm. Such a tabletop will add luxury to the interior, bring in a touch of aristocracy. But for all their beauty, such surfaces are quickly damaged, and some stains are simply impossible to remove. Chipboard is used less often, since the surface must be moisture resistant. This material is cheap, but of poor quality.

When installing a countertop, it is worth considering not only the material, its thickness and other dimensions, but also the fact that most of the countertop is located between the stove and the sink. This is the main space in the kitchen, it should be spacious and free. If possible, in this interval it is better not to install any equipment at all.

If you decide to use a hob instead of a standard hob, then it is worth remembering that the thickness of the slab and the panel must have the same indicator. Otherwise, the panel will fail, and the repair of such equipment is quite expensive. It is best to pick up these components of the kitchen set at the stage of purchase. If your worktop is 60 mm thick, then a slab is worth choosing. For small kitchens, a 2-burner device is suitable.And also during installation, you need to think about a place for other kitchen appliances, such as a microwave oven, coffee maker, toaster.

When choosing, be sure to take into account the area and shape of the kitchen. For example, a corner option is suitable for a small rectangular room. When installing the countertop for the corner set, the slab joint must be correctly positioned. They should run at a 45 ° angle. Seams are filled with sealant. Moisture should not get into the seams, otherwise, over time, the material will begin to swell and lose not only its appearance, but also its performance. In addition, the countertop must be properly cared for.

Any surface intended for the kitchen, although it is moisture resistant, still does not tolerate the presence of water, the material will last less than the stated period. If water gets on the surface, it is better to wipe the countertop dry immediately. Some materials require regular special care. For example, a tree should be treated with special oil once or twice a year. It is sold in every hardware store, and one bottle will last for several years. This same oil will help mask minor scratches.

The table top is made of MDF. It is made of a dark material that contrasts with the rest of the interior. Its thickness is 28 mm. The stove and sink are harmoniously located. The additional work surface is perpendicular to the main headset.

The chic thick granite worktop gives the kitchen a luxurious and noble look. The photo shows that the surface is quite extensive and occupies the maximum area. Plenty of space in the work area. It is a pleasure to work in such a kitchen.

Classic - marble countertop. Large space between sink and hob. The corner version of the table top is made of a solid slab.

This photo shows an option for decorating a small kitchen with a worktop of a non-standard shape. The main material - chipboard - looks beautiful and harmonious. To work in the kitchen was spacious, you can use the dining table as an additional working area.

A non-standard approach to the design of solid wood countertops. It is worth noting that this option will be appreciated by eco-style lovers. The edge of the worktop is a natural, untreated edge of wood.

Another option for using natural wood in the design of a kitchen set. The material used here is glued. The table top is positioned at an angle, freeing up ample space for cooking.

For information on how thick the kitchen countertop should be, see the video below.