All About Swivel Vise

Content
  1. Peculiarities
  2. Varieties
  3. Manufacturers
  4. How to choose?

Carpentry, plumbing and other crafts have a number of important subtleties. Those who are going to deal with them should immediately find out these subtleties for themselves in order to eliminate various problems and difficulties. It is useful to know, for example, everything about the rotary vise, their possibilities and the nuances of choice.

Peculiarities

When characterizing the rotary vise, it is impossible to ignore their main advantage over non-rotary devices. This is the very possibility of turning the workpiece in an arbitrary way. In a non-rotating vice, to perform this seemingly simple manipulation, you have to take out the workpiece, and then fix it again. This immediately increases the overall time spent.

It should be noted that swivel vices are in demand primarily in drilling work.They may even come with the drill press.

But the exact same technique is sold separately. Including for household use. The pivot vise often contains an anvil... It not only expands the range of operations performed, but also increases the overall strength of the tool.

Varieties

First of all, it should be said about pivot-type vice... Products of this kind are offered by any self-respecting manufacturer.

Often, such a tool is used for particularly precise work at home or in a small workshop.

Designers can provide a special clamp for a drill. The diameter of the clamp in advanced designs is adjusted quite widely, which expands the overall functionality.

Concerning swivel vice, then they are used even in fairly serious production. There, such devices are usually used in conjunction with metal-cutting equipment. This refers not only to drilling, but also milling and grinding systems. Many samples of such vices are equipped with a swivel base by default, however, the exact configuration is recommended to be agreed upon when placing an order.

Quite widely used parallel vise... The release of such devices is governed by the provisions of the 1975 standard. The moving part moves away from the stationary block as evenly as possible, while maintaining strict parallelism - hence the general name.

The size of the workpiece can be any - all the same, pressing will be done by the same part of the cheeks.

Parallel vise:

  • are freely placed at any point of the workbench, including in its center;
  • can be installed on the floor;
  • equipped with a base with three holes;
  • can have a base of steel or cast iron alloys, since the mechanical load will not act on it.

Some model swivel in two planes... They are usually made with a two-axis positioning mechanism. Almost all such devices are equipped with a cast iron base, but sometimes steel structures are also found.

Deserve special attention three-turn vise... They can be used even for the most difficult and demanding jobs. Such a tool is useful for sharpening and finishing cutters in various installations.

Important: all pivot planes are mutually perpendicular.

Another three-turn vise is useful for systematic dressing of diamond wheels.

It remains to make out one more type of tool, namely pneumatic vise... They are no longer operated manually, but by the energy of compressed air. Power clamping is often used on production lines, especially in their locksmith areas.In this case, the squeezing force can reach 1500 kg.

Of course, no mechanical devices of the traditional type are capable of such a result, or even a close one.

Such a tool reduces the costs of not only physical strength, but also time, but it is irrational to use it at home.

High-speed pneumatic vices were created back in the 1940s-1950s. But more or less perfect developments of this kind appeared only in the 1960s. It was then that they began to be widely used in the locksmith and machine tool formats. The problem is that the old stocks of such a tool have come to an end, and new copies bought abroad are unsatisfactory in a number of characteristics. Therefore, in recent years, the restoration of the production of pneumatic rotary vices in our country has begun.

Manufacturers

Enjoys demand model FIT 59425... The device weighs 0.965 kg. The width of the jaws is 50 mm. The frame is made of cast iron. The device is intended mainly for locksmith work.

Not a bad choice can be swivel vise model WILTON 65021EU... The weight of the device in the package reaches 15.45 kg. The width of the jaws is 0.225 m. They open up to 0.345 m. The frame is made of cast iron.

The features of such a product can be considered:

  • carpentry purpose;
  • quick release;
  • automatic movement.

Another attractive option is vice "Glazov"... For example, model 18667. The device is intended for locksmith work and has jaws 0.14 m wide. The frame is made of high-quality steel. The jaws can open up to 0.18 m.

The following brands are also widely represented on the Russian market:

  • "Caliber";
  • Forsage;
  • Skrab;
  • "Bison";
  • Hammer;
  • Stalex.

How to choose?

The chair vise is prized for its quick installation even at the edge of the worktable. You can also dismantle them quickly enough. Finally, the chair tool is quite convenient for storage.

The difference between steel and cast iron vise matters... Some cast iron versions are particularly robust and mechanically resistant to damage. It has been found that ferritic cast iron is 10 times stronger than gray alloy. But steel vices are even more popular. With the same strength, even in comparison with cast-iron devices, they turn out to be much lighter.

If the designers used forged hardened steel, then the tool will confidently work for several years.

You also need to pay attention to the characteristics of the device. The larger the size of the parts to be processed, the greater the divergence of the jaws should be..

Here are some more recommendations:

  • take into account the amount of movement of the part;
  • pay attention to the margin of safety;
  • check the quality of clamping of workpieces;
  • buy a vice only in reliable, proven places;
  • read reviews on different sites.

Below is a video overview of popular rotary vices from different manufacturers.

      no comments

      The comment was sent successfully.

      Kitchen

      Bedroom

      Furniture