How to clean the filter in the Indesit washing machine?

Content
  1. Where is?
  2. How to remove?
  3. What is required?
  4. Cleaning and replacement process

Indesit washing machines are a unique combination of reliability, durability and quality performance. But in order for these characteristics to be preserved for many years, the device must be regularly and properly looked after. In particular, regularly clean the filter from various contaminants. We will talk about when it is necessary to carry out these works and how to properly perform them in this article.

Where is?

The drain filter in automatic machines of this brand is located in the lower part on the front side of the device, as a rule, on the right. It is protected from damage by a special protective cover. This filter prevents foreign objects from entering the device from clogging the drain hose and retains them.

If this dirt trap is not cleaned regularly, problems with the operation of the machine may begin. - water is slowly collected and drained, during the operation of the device, errors may constantly occur, and the device itself periodically may simply not turn on or block the doors.

But the most unpleasant thing is that an unpleasant odor appears in the washing machine, which eventually penetrates into things, and even just washed linen may not have the most pleasant aroma.

Few people know that in modern models of automatic machines there is one more filter - a filler. It is intended for additional purification of tap water entering the device.

Both of these filters need to be cleaned of contamination on a regular basis. In this case, the drain device is every two months, but the filler dirt trap - every six months.

How to remove?

In order to clean the drain filter, you must first remove it from the household appliance itself. In order to get it, you need to do the following:

  • remove the protective cover from the body;
  • find a small recess on the side of the filter itself;
  • grab it with your fingers and unscrew;
  • if unscrewing is tight, it is necessary to check if the filter is additionally fastened with a bolt;
  • if it is, then first you need to remove it, and only then remove the filter itself.

In some situations, especially when the drain dirt trap has not been cleaned for a very long time or the machine has recently begun to frequently give out errors during operation, it can be very difficult to remove it. In this case, you should not use force and try to pull it out. You just need to do the following:

  • free up space around the automatic machine;
  • lay the device on its side so that the filter itself is as close to the floor as possible;
  • unscrew the pump;
  • unscrew the filter through the resulting hole from the inside.

If it is necessary to clean the filler filter, if any, unscrew it according to the same scheme. But instead of a protective cover, first of all, you need to open the filler hole at the point where the hose is connected to the device, and only then unscrew the filter itself.

What is required?

In order to clean this dirt trap efficiently and quickly, it is necessary in advance, even before removing the filter, to prepare the following tools:

  • clean cloths with good absorbency;
  • a toothbrush for cleaning small parts;
  • gloves.

In addition, you may also need a screwdriver - if the filter itself is secured with a bolt. It is also necessary to prepare a clean floor cloth - it must be placed on the floor under the hole so that after removing the part, dirty water does not spread.

Clean rags are necessary for two purposes - wiping the hole inside, and washing and wiping dry the dirt trap itself.

A toothbrush may not be required in all cases, but it is it that helps to remove dirt from the most inaccessible places quickly and efficiently.

Cleaning and replacement process

It is necessary to clean from dirt and debris not only the dirt trap itself, but also the cavity in which it is located. For this you need:

  • with gloved hands, remove all foreign objects from the cavity, as a rule, these are threads, coins or buttons;
  • then wipe all sides thoroughly with a clean damp cloth, repeat the procedure if necessary;
  • if the dirt is not removed, you can prepare a soapy solution from the powder and apply it to the walls of the case;
  • leave for 10 minutes, and then remove everything thoroughly;
  • lastly, the cavity of the location of the filter itself is wiped dry with a clean cloth.

Now you need to start cleaning the filter itself. This is done as follows:

  • all foreign bodies are removed from its surface by hands;
  • using a toothbrush, the filter is cleaned of layers of scale and dirt, while it is important to remember that rubberized parts of a white color are not cleaned;
  • then, under running water, the filter is thoroughly washed to remove any contaminants;
  • wipe it dry and put it back in the washing machine.

Professional car repairmen also recommend, after completing all the manipulations, to wipe the filter itself and the cavity in which it is located with a lemon slice, and only after the juice itself has dried, install the dirt trap in place. This simple trick will get rid of the unpleasant odor and lightly disinfect the device itself.

The filler filter is cleaned as follows.

  • All coarse debris is removed from the mesh surface.
  • Soak the dirt trap itself in a citric acid solution for 15 minutes. Take 1 tsp for 1 liter of warm water. powder.
  • Then, using a toothbrush, lumps of dirt and scale are removed.
  • Rinse the device thoroughly in warm running water. Wipe it dry and set it in place.

It is important to remember that all work should be carried out only after the Indesit washing machine is disconnected from the electrical network, and the access of water to the device is blocked.

However, in some situations, simply cleaning the drain filter in the washing machine is not enough. In some situations, it needs to be replaced. This can happen for the following reasons.

  • The filter does not perform its function even after cleaning... In such situations, the drain hose is clogged all the time, the machine gives out an error code during operation.
  • Dirt trap burst... In this case, some of the dirt and scale will still get inside the appliance, which will shorten its service life, and also reduce the quality of the wash itself.

If you cannot clean the filter from scale and dirt, and if there are too many of them on the device, it must be replaced. This will not only allow the machine to perform better, but will also extend its service life.

Replacement should only be carried out using an original filter designed for installation on machines of the same model. The process itself is very simple and fast.

  • The device must be de-energized and shut off the water supply to it.
  • Remove the old filter from the housing.
  • Thoroughly clean and dry the cavity in which the dirt trap is located.
  • Install a new filter according to the instructions. To do this, install the latches in the grooves, and then insert the device into place with light screwing movements.
  • Install the protective cover.
  • Connect the device to the mains and open the water supply.

It is also worth remembering that regular cleaning of the drain filter helps to extend not only its service life, but also the service life of the entire device. Moreover, it is necessary to clean the filler filter, if any.

Only when these rules are followed, the washing machine will serve for a long time, properly, and the quality of the wash will only please.

How to clean the filter in the Indesit washing machine, see below.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture