Washing machines "Fairy": characteristics and lineup

Content
  1. Peculiarities
  2. Model overview
  3. How to choose?
  4. User manual
  5. Possible malfunctions

A washing machine is an indispensable helper in everyday life. However, it is not always possible to install an automatic model. The reason may be lack of money, lack of central water supply, or something else. In such cases, the purchase of the "Fairy" technique becomes an excellent solution. Semi-automatic and activator units allow you to quickly and economically wash clothes in almost any conditions. Let's consider the brand assortment in more detail.

Peculiarities

Household appliances "Fairy" appeared on the market in 1982. Despite the huge range of modern automatic washing machines, the company's products are not losing their popularity. The characteristics of the models have been upgraded. At the same time, the brand's units stand out for their low cost and versatility.

The company produces models of the activator type. The machines are distinguished by the vertical loading of linen... The control is carried out mechanically (using a switch). And also the products are equipped with timers that allow you to set the necessary washing parameters.

Technique does not require connection to communications... Water is collected using a hose. After the machine has finished working, the dirty liquid is drained off in the same way. Semi-automatic versions combine washing and centrifuge capabilities. Due to this, they can wring out the cleaned things.

Simpler models involve manual spinning.

Despite the lack of a large number of functions, small-sized Feya washing machines have tangible advantages.

  • Compact and lightweight... Such equipment can be placed even in a small room. And also, if necessary, it can be easily moved to another place.
  • Versatility... The lack of attachment to pipes allows the use of equipment in the country and in other non-standard conditions.
  • Profitability... Such models consume little water and electricity.
  • Quickness of work... Due to the possibility of filling the container with warm water, you can save washing time, because the unit does not need time to heat the liquid.
  • Ease of use... The models are intuitive to connect and operate. The absence of complex mechanisms, electronics and a large number of programs allows even elderly people to understand the process.
  • Reliability... Aggregates rarely break down.
  • Cheapness... Compared to automatic machines, such washing machines are quite cheap.

However, it is fair to note the disadvantages of activator aggregates.

  • Small capacity... The Fairy device can hold no more than 3 kg of things.
  • Minimum feature set... People accustomed to machines with programs for each type of material and additional functions such as easy ironing will be disappointed. The Fairy technique has only a couple of modes (regular and delicate wash). In order to rinse the laundry, clean water has to be filled in manually. And the spin function in some models is generally absent.
  • Not the highest quality wash... There are no stain removal options in the brand's units, and in general, the work of the equipment is slightly inferior to automatic machines. In addition, some users believe that it is better not to load delicate items from delicate fabrics into such a machine. However, there are other data suggesting that the wear of fabrics during washing in activator units is lower than when cleaning in automatic models.
  • The need for control... The process is not fully automated and requires human participation.

Model overview

Let's consider several popular models.

"Fairy SM-2"

This model can be called legendary, because it is one of the first. The device holds 2 kg of items. It is compact and lightweight (only 14 kg). The model can be transported in a car and used in the country... The lid prevents water from splashing out. The timer is designed for 8 minutes. The process can be started three times. Adding water and adding laundry are permissible. Rinsing is possible. Spinning is carried out manually.

The model has a low cost, due to which it remains very popular.

"Fairy SMP-60N"

This is a semiautomatic device. The modification is more spacious than the previous one. She can wash about 6 kg of things at a time.... Mechanical control. The user can set the mode (normal or for delicate fabrics), as well as adjust the duration of the wash using the timer.

The temperature level of the wash can be adjusted by immediately drawing water at the desired temperature.

You do not need to manually drain the liquid. The user is assisted in this by the drain pump. The spinning takes place in a centrifuge.

"Fairy SMP-40 N" (glass panel)

This freestanding activator washing machine can hold 4 kg of items. From the special programs it is possible to wash delicate fabrics. And additional loading of linen is allowed through the main hatch... There is no spin option, but there is a pump that makes it easier to drain the waste water.

"Fairy SMP-50 N"

Here the maximum load of laundry is 5 kg. It is supposed to be spinned manually, but there is a delicate wash mode. In the process, you can add laundry, the main thing is not to exceed the permissible maximum... Draining takes place using a pump.

"Fairy SMPA-2003"

This semi-automatic model holds 2 kg of items. The maximum washing cycle time is 15 minutes. There are 3 modes: normal, delicate and spin. Spinning can take from 1 to 5 minutes.

"Fairy SMPA-4501"

Here, the maximum load of the washing tub is 4.5 kg. Spinning at high speeds ensures maximum loss of excess moisture. This allows the laundry to dry quickly. The timer allows you to adjust the time parameters of washing and spinning.

How to choose?

When choosing a technique for washing "Fairy", you should focus on a few basic points. Think in advance how much laundry you will have to wash periodically. The volume of the selected unit depends on this. Remember that the larger the washing machine, the heavier and larger it is.... If you will be transporting it or planning to put it in a small bathroom, it may be better to stay with the more compact version and just wash more often.

As for the technical characteristics of the units, the difference lies in the availability of a mode for delicate fabrics and a spin function. And you can also pay attention to whether there is a carrying handle, the ability to automatically drain water using a pump.

Remember that the ability to add things exists only in models without the spin option - you can open the tank lid at any time. Semi-automatic spinning models do not provide such an opportunity.

User manual

If the purchase of equipment was made in the winter, you should not immediately start using it after coming home. Severe temperature fluctuations can damage the unit. Be sure to wait about 2-3 hours, and only then plug the washing machine into the network.

Despite the fact that the "Fairy" technique can be used in summer cottages, you should not put the washing machine in a cold shed. Low temperature will negatively affect the device.... Indoors, the unit can be placed on any level surface. For work, you will need a working outlet nearby, a tap and a bathroom to drain the liquid. Outside working hours, the unit can be removed to another location.

Before switching on directly, read the operating instructions supplied with the product. Then you need to install the unit on the floor or a bedside table, make sure that the hoses are intact and freely reach the right places. Trying to lengthen them with improvised means is not worth it, this can lead to a leak. If the length is not enough, it is better to purchase new hoses in advance.

Before using for the first time, it is recommended to wipe the inside of the appliance with a damp and then dry clean cloth. After that connect the device to the mains and check its operation at idle speed (without laundry)... For this, one end of the hose is attached to the water tap. The second plunges into the tank. Then you should turn on the water of the desired temperature, direct the flow to the device. When the car is full, it is plugged in.

If everything is in order, you can start washing. In this case, a detergent is added to the water. Then the laundry is lowered and the washing machine is covered with a lid. Use the switch to set the required mode and time. After the end of the process, the machine turns off by itself... The water is drained using a hose (the stream can be directed both into the bathtub and into the toilet) or a pump.

The next step is rinsing. The tank is filled with clean water again. The process starts. Then the items are taken out and wrung out manually (if the unit does not have a spin option).

If spinning is included in the options of the machine, after rinsing, the laundry is transferred to the centrifuge.

After the washing machine has finished working and the water has been drained, the hose is fixed to the unit body in a vertical position. The electrical cord is unplugged from the outlet and reeled up. The drain filter is being cleaned. And wipe the inside of the tank... It is better to leave the lid open for a while so that the equipment is ventilated and completely dry.

A few words should be said about the choice of detergents. One of the advantages of the brand's technique is that it allows you to use not only powder for washing in machines, but also other options. For example, it can be hand wash powder or cleaned laundry soap.

As for the temperature of the water, it depends on the type of fabrics to be cleaned.

For example, cotton and linen are washed at 45-50 ° C. For wool and silk, a temperature of 25-35 ° C is more suitable. Rinse laundry, regardless of its type, at 15-25 ° C.

The washing time is also related to the characteristics of different materials. Linen and cotton are usually washed in about 10-15 minutes. More delicate items - 5 to 10 minutes. A longer process is not recommended to avoid premature tissue wear. Exceptions are heavily soiled items that can be re-washed.

In order for the equipment to work properly and as efficiently as possible, it is worth considering several important recommendations.

  • Sort laundry by type of fabric, color, degree of contamination.
  • Place the largest and heaviest items in the bottom of the tank.
  • Distribute the laundry evenly. The accumulation of things on one side will lead to imbalance in work, increased noise and vibration.
  • Do not overload your device. Stick to the established norm.
  • Do not use harsh bleaches.
  • Be sure to wash and dry the unit after every wash.
  • To prevent items from falling out when spinning in a centrifuge, fix them in the device with a safety net.

To minimize breakdowns and unpleasant situations, it is worth following simple safety rules:

  • do not plug the unit into the network with wet hands;
  • do not turn on the "Fairy" without water in the tank;
  • do not use a faulty outlet;
  • do not turn on the device if it is on an uneven surface;
  • do not pour water above the marked level.

Do not move the washing machine with water in it.

Possible malfunctions

Despite the fact that the activator machines have a simple device, malfunctions still happen.Until the warranty period has expired, in case of breakdowns, you should immediately contact the service center. If you open the device yourself, you will be denied free warranty repairs. In the future, it is also better to contact professional craftsmen, although some users carry out repairs on their own. In this case, it is important to have a diagram of the device in front of your eyes, to understand the nuances of the unit's operation, to understand which parts should be replaced.

Consider the most common malfunctions of washing machines of this type.

Engine does not run when turned on

In this case, you should check the serviceability of the outlet by plugging in something else (for example, a lamp). If the test passes, there may be other reasons. These include a faulty plug, a broken power cord, a broken timer... The engine pulley may need to be replaced. In each of these cases, it is better to contact the master.

The engine is humming, but the activator does not work

Overloading the device may be the cause. It may also be that the activator is pressed. In this case, turn off the unit. Then you need to release the activator and wait 3-5 minutes. After that, you can start the washing process again. If the matter is in the low voltage of the network, you just need to wait for it to recover.

Sometimes this happens when the belt comes off. And you can check the condition of the capacitor and other components... It is possible that parts will need to be replaced.

Decreases the intensity of washing

This is usually due to poor belt tension. This problem can be resolved by replacing the indicated part.

The unit is leaking

This could be due to a damaged hose or a worn seal. Damaged elements must be replaced.

Splashing water

This can happen when there is not enough liquid. You just need to add water to the tank - and the problem will be solved.

The activator tears the laundry

In such a situation, the condition of the seal and gaskets is checked. In extreme cases, you have to change the activator.

The centrifuge does not work

The problem here may be in the electrical system. It is necessary to check the cord, the condition of the wiring, the thermal relay, the capacitor and the motor.

Drain does not work

If the water does not go away, it is necessary to assess the condition of the drain hose, filter, pump. If a blockage is found, the listed items must be cleaned.

If the situation is running, the pump is changed.

Too loud noise

If the cause is not an overload or foreign objects accidentally got inside, a complete diagnosis of the unit is required.

An overview of the Fairy 2 washing machine is presented in the following video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture