How to insert staples into a furniture stapler?

Content
  1. How do I refill a mechanical stapler?
  2. How do I charge other types?
  3. Recommendations

A mechanical stapler helps you to attach a variety of materials - plastic, wood, films, to each other or to other surfaces. The stapler is one of the most popular tools in construction and everyday use. When using such a device, there is necessarily a need to insert staples into a furniture stapler. The choice of a specific model depends on the material, as well as on the required pressing force, the amount of work, the possibility of transportation, the cost and frequency of use of the tool.

How do I refill a mechanical stapler?

Furniture staplers are divided into three types:

  • mechanical;
  • electrical;
  • pneumatic.

It is necessary to take into account the specifics of threading the tool, which directly depends on its moving mechanism.

The design of such staplers is not much different from each other. They consist of a lever handle, through which a mechanical push is carried out, and at the bottom of the instrument there is a metal plate that opens the receiver. Staples can be placed in this receptacle.

The mechanical view is driven by the applied force of the hands, which indicates their weak power. The model accommodates a small number of staples. With their help, it will not work to nail solid and thick structures. However, such assistants are light in weight and compact in size, so they will be needed to handle hard-to-reach places. The mechanical type of stapler is available at a low price, compact to carry and easy to maneuver.

To insert staples into a mechanical stapler, follow the steps below.

  • To refill the stapler, you must first open the plate. To do this, you should take it from both sides with your thumb and forefinger, and then pull it to your side and slightly down. This will squeeze out the metal tab on the back of the plate.
  • Then you need to pull out a metal spring, similar to that found in an ordinary stationery stapler. If the staples have not yet run out, they will fall out of the stapler when the spring is removed.
  • The staples must be inserted into the receptacle, which looks like a U-shaped hole.
  • Then the spring is returned to its place and the metal tab is closed.

After completing these steps step by step, the tool will become suitable for further use.

How do I charge other types?

Electric staplers function by releasing the staple after pressing the drive button. Such a device requires a network connection to a power source to operate. Among the assortment, you can choose the optimal model with a rechargeable battery or connection to the mains adapter.

The dimensions and cost of electric staplers are significantly increased compared to conventional units. In addition, such devices have a cumbersome handle and an inconvenient cord position.

The pneumatic version is activated by the supply of compressed air, which facilitates the flight from the store of consumables. The devices support long battery life, are roomy and have high performance. At the same time, pneumatic staplers have a disadvantage in the form of noise emitted during operation. Such a device of impressive size is inconvenient to transport.Most suitable for construction professionals.

It is quite easy to learn how to use a construction stapler, but you need to read the instruction manual and make sure that the tool is set up correctly in order to change the fasteners. If you need to remove staples that are hammered into the surface, you will have to use a staple remover. To remove the furniture brackets, you should gently squeeze their ends with a screwdriver or pliers when there is no special tool available to remove them.

The construction stapler is refueled as follows.

  • Before disassembling the spring, lock the device with a button or lever. The type of blocker depends on the specific features of the model.
  • The groove is pulled out. You need to make physical efforts or press a button.
  • Pull out the inner rod by displacing the metal spring. Place paper clips on the rod. The tip of the device should point towards the handle.
  • The rod is inserted back, then the store is closed.
  • The device is removed from the fuse, and test shots are fired to check the functionality.

After testing the device, you need to make sure that it functions without fail. To do this, adjust the spring tension and follow safety precautions. Remember that the device is potentially hazardous. Working with it requires compliance with precautionary measures:

  • after completion of use, you need to install the fuse back;
  • it is prohibited to direct the device to oneself or to any living being;
  • it is not recommended to pick up the device if you feel unwell;
  • the workplace should be clean and the lighting should be bright enough;
  • the stapler must not be used in damp rooms.

In order to correctly insert the brackets into the furniture unit and replace the consumable, you must flip the lid or pull out the corresponding container before charging the device. After that, pull back the feed mechanism, then install the clip into the body. After filling the device with staples, the mechanism is loosened and the clip is fixed. Close fixture or push in tray.

The penetration of the material is realized by pressing the working area to the area that you want to fix. Next, the lever is activated, as a result of which the bracket pierces the surface.

Recommendations

  • Before purchasing staples for refilling a stapler, you should first find out which size and type is suitable for your machine. Information about this characteristic is usually indicated on the body, including the width and depth of the staples (measured in mm). Before buying a stapler for furniture, it is recommended to evaluate the density and thickness of a given structure to be processed, and then choose the number of staples that will reliably fix the material.
  • Before starting work, adjust the adjusting screw to match the surface. If the material is tough, it will require a strong punching of the staples and a lot of force.
  • In the process of fixing the material, you need to press the lever with one hand, and press the adjusting screw with the finger of the other hand. The kickback is minimized and the load distribution becomes even. Advanced building tools have a shock absorber.
  • If you have an electric stapler, remember to de-energize or disconnect the compressor before refueling to ensure safe charging.
  • Some staplers work not only with staples, but also with bunches of different shapes. Depending on the tasks, it is better to choose a universal tool that can work with several types of fasteners at once. Designations are indicated on the body of the device or in the instructions. Carnations are filled in by analogy with staples, but it is recommended to be careful when inserting them and pulling out the spring.
  • There are times when, with prolonged use of a construction device, a bracket breaks inside the receiver. If the fastener is stuck or bent in the outlet, you need to pull out the magazine along with the brackets. Then remove the jammed clip and reassemble the tool.

How to charge the furniture stapler, see the video below.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture