How to open an interior door lock without a key?
When the lock is jammed or the key is lost, opening the interior door becomes a problem and a terrible headache for many owners. It is not possible to independently open an expensive mechanism with an ax or other similar tool, and it will take a lot of patience from the master to call and wait for the result. How to open the lock of an interior door on your own without a key and unnecessary damage, as well as without additional expenses for restoring the door and lock - we will tell you in this article.
What do you need?
As a rule, it is quite easy to break open the locks of interior doors, because locks of simple design are installed on them. Only one tool is needed for the entire process. To choose it, you need to carefully study the shape of the keyhole and its dimensions. The tool should enter this well freely. The choice should depend on the shape of the gap.
- For a round slot, a thin and narrow object, for example, a knitting needle, needle, awl, is best suited.
- If the gap is more elongated, then it should be a flat object, for example, a screwdriver, knife, and even scissors.
How to open?
To break such a lock, screwdrivers, scissors, knitting needles are perfect, but the most convenient and simple option of all the available means is a paper clip, which will be discussed here. In addition, for such a lock, you will also need a screwdriver, which will play an auxiliary role in this case. First you need to straighten the paperclip, bend its small edge, then insert it into the slot in the keyhole. Further, with the help of these two tools, it is necessary to shift the rods of the lock into the "correct" state. It is almost impossible to see something through the gap, so you need to focus only on hearing and clicks. A characteristic click indicates that the rods are in their "correct" place. Usually, the first time such a lock cannot be opened without the presence of skills.
But if the door does not open in this way, then there is a more effective, but crude method. This will require a drill, hammer and screwdriver. To open the lock, you first need to insert a screwdriver as deep as possible into the keyhole, then try to turn it inside. If the door did not open in this case, then we do the same, but only with a drill. You need to drill until the lock gives in, carefully pushing back the rods inside the lock mechanism.
If the lever mechanism is stuck
The main part of such locks, as the name implies, are the so-called levers, locked with the main pin. It can be drilled at the reference point using a drill with a special drill. Then you can simply turn all the levers with a bent paper clip, after which such a mechanism will easily open. You can also try to pick the lever lock with master keys.
To do this, you will need two items that resemble lockpicks or the lockpicks themselves (it is quite easy to acquire them in our time). One master key is inserted all the way, the other is picked up and shifted by the levers. This process, as with the previous species of the locking mechanism, also requires some skills. It is important that interior doors are most often equipped with just this kind of lock.
How to open the rack and pinion mechanism?
Compared to other types of mechanisms, such a lock is the easiest to break.There are several ways to break this kind of lock mechanisms. For the first option, you will need two flat, long, sharp or thin screwdrivers. They must be quite thin and narrow to fit into the opening of the lock at the same time. With the first screwdriver, you need to, catching the notch of the crossbar, move it to the side. The second screwdriver fixes this position. Next, this will need to be done with all the elements of the castle.
The second method of hacking is based on the ability to operate with a wooden wedge-key. It is a peg made of soft wood. To open the lock, it will be necessary to hammer this peg into the keyhole, then grind the piece of wood along the remaining outline and repeat this several times. The result is something like a master key, suitable for this particular lock.
Another method can be carried out only when there is a small space between the canvas and the box. Where, in fact, will need to "hammer" the crowbar. The tool will need to be positioned in the narrow space between the jamb and the door. After that, you will need to drive it as close to the lock as possible. As a result, the gap should be learned where the master key is inserted. With the help of it, it is necessary to move the bolt of the lock inward.
If the padlock is jammed
Opening such a lock is not so difficult even for a beginner in this business, and if you have special skills, it is easy. Accuracy when breaking this lock does not really matter, in addition, such models for the most part have a budget price, which also does not favor the safety of their integrity when breaking. There are several ways you can do this.
For the first method, you need two keys that fit the lock. They are located along the edges of the arc of the locking mechanism with ribs to each other. The opposite ends are connected, thereby creating tension on the internal mechanism, which breaks near the latch area. Although it will no longer be possible to use it, it will open quickly.
The second method is rude, but effective in cases where you need to quickly open a similar model of the locking mechanism. The required tools are a self-tapping screw, a nail clipper. The self-tapping screw is placed and screwed directly into the larva, and then simply pulled out with a nail puller along with the entire mechanism.
Another method requires only a tin can for its implementation. A piece in the form of a small plate is cut out of it. Next, you need to bend one edge. This plate is inserted between the snap-on bow and the body with the straight side. It is pushed deeper with a sharp and thin object. When brought to the stop, the mechanism opens.
Almost every one of us has lost our keys at least once and faced the problem of a locked door, whether it be an interior or entrance option. This situation is not at all a reason for panic or painful pastime while waiting for the master. Interior locking mechanisms are distinguished by a simple design and, for the most part, can be easily opened with the help of improvised means. If you have the acquired skills in these ways, it is possible to open the front door equipped with one of the above mechanisms.
How to open the door without a key, see the video below.
The comment was sent successfully.