All about trolley jacks for 3 tons

Content
  1. Peculiarities
  2. Principle of operation
  3. Views
  4. Model rating
  5. How to choose?

The modern rhythm of life simply makes you get your own car, and each vehicle will sooner or later have to undergo technical inspection and repair. At the very least, it is impossible to change a wheel on your car without using a jack. Most types of repair and maintenance of vehicles begin with lifting the machine. Such a useful tool as a rolling jack will be discussed in the article.

Peculiarities

Rolling jack - a very useful and necessary thing in every garage. It should only be remembered that he needs a flat, solid surface to work. This tool is a long, narrow cart with metal wheels. The whole structure is rather weighty.

It makes no sense to carry such a jack with you in the trunk, since it is not always possible to find a level shoulder for its use. At the same time, it is heavy and takes up a lot of space. This tool is indispensable for workshops that carry out minor quick repairs without the need to fully raise the machine on a lift. Tire centers simply cannot do without such equipment.

He always will find its use in a simple garage, because it is not always handy for a car owner to get through the entire trunk for a small jack that comes with the car. In addition, now on some brands of cars "native" plastic jacks, and car owners do not always want to check their strength and play Russian roulette.

In the raised state, the trolley jack is low, but very stable, which allows, if necessary, to shake some parts of the car a little, to open the doors and trunk.

The device described has in its design the frame itself, a lifting mechanism powered by a manual oil pump, and the oil pump itself. This mechanism, with its dimensions, can lift large weights and lower them smoothly.

The mechanism of the device includes a shut-off valve that allows the stem to be locked in a certain position with a load. Some models are equipped with special grips to expand the capabilities of the device.

There are jacks that do not work from a hand pump, but from a pneumatic tool. For such a lifting mechanism to work, it is necessary to have a compressor. This type of jack is not practical for home use and finds its place in service stations for trucks.

Roll-up jacks have their own advantages, which are worth noting:

  • ease of use with the necessary free space;
  • having wheels, it is not necessary to carry it in your hands, but you can simply roll it to the right place;
  • due to the ability to work with a large weight, such a jack will be able to lift the entire side of the car;
  • no special places are needed for lifting, that is, you can lift the car at any safe place;
  • the make and type of vehicle are absolutely not important, as long as the weight does not exceed the permissible values.

In addition to all its obvious advantages, there was still a place for disadvantages, and they are as follows:

  • high price for this type of instrument;
  • large weight and dimensions.

The need for such a device should be obvious, unless it is a nice addition to your toolbox. In other cases, a simple hydraulic bottle-type jack can be completely dispensed with.

It costs much less, and also raises a lot. If you only need to lift the car 2 times a year to change seasonal wheels, then there is no need for a cumbersome trolley version for this.

Principle of operation

The principle of operation of such a mechanism is quite simple. For a correct understanding, consider all its main elements:

  • oil piston pump;
  • lever arm;
  • valve;
  • working hydraulic cylinder;
  • expansion tank with oil.

How the jack works consists in the fact that during the operation of the pump, which is set in motion by pumping in manual mode, oil from the reservoir is supplied to the working hydraulic cylinder, thereby squeezing the rod out of it.

After each supply of a portion of oil, a valve is triggered, which does not allow it to come back.

Accordingly, the more oil is pumped into the hydraulic cylinder, the further the rod will move out of it. Thanks to this extension, the platform is lifted, which is rigidly connected to the rod.

During the process of pumping oil, the lifting mechanism must be located directly under the machine so that its lifting platform rests on a special place on the body. As soon as the required height is reached, you need to stop pumping oil, and the jack will remain at this height. After lifting the load, it is advisable to remove the handle with which you were swinging so as not to accidentally press it and add oil to the cylinder - this can be dangerous to life and health.

After completing all work, the machine must be lowered again. This is very easy to do. It is necessary to find a bypass valve on the mechanism and slightly open it so that the oil can flow back into the expansion tank, and the jack is lowered. To prevent the loaded tool from falling too abruptly, open the bypass valve gradually and gradually.

In order to avoid mistakes and work correctly with the described device, before using it, you must read the instructions, which always comes with the device itself. In addition, behind the product it is necessary to look after and carry out prevention on time. By observing all the recommendations described in the operating manual, your jack will serve for a very long time.

Views

Jack Is a special mechanism that raises a certain weight to the maximum height allowed by the structure. There are several types of such mechanisms:

  • portable;
  • stationary;
  • mobile.

They can also differ in design. There are the following types of jack mechanisms:

  • rack and pinion;
  • screw;
  • pneumatic;
  • hydraulic.

Let's consider each of these types in more detail.

  • Rack... This type of jack is very stable. Externally, the device looks like a metal frame with engaging teeth, which are necessary for the movement of the lifting bar. Such a unit is driven by a lever-type transmission. Position fixation is carried out using an element called a "dog". Jacks of this type can be used not only in the automotive sector, but also in construction. Such products have large dimensions and weight.
  • Screw. Rolling types of such jacks are quite unusual. The lifting process takes place due to the rotation of the screw rod, which converts the rotational force into translational force to move the special platform.
  • Rhomboid rolling jacks with screw method of work. Such a product has 4 separate metal elements that are connected to each other by means of hinges. The horizontal part of this device is a screw stem. When the screw element begins to twist, the rhombus is compressed in one plane and unclenched in the other. The vertical part of such a lifting mechanism is equipped with a platform that rests against the bottom of the vehicle. Jacks of this type have very compact dimensions and reliable construction.
  • Pneumatic. As mentioned earlier, this type of jack needs additional equipment to operate. Lifting is carried out by the supply of compressed air, and lowering is due to the decrease in pressure in the cylinder. These models are designed to work with trucks weighing more than 5 tons.

Now the most demanded are hydraulic models. They are stationary, portable and movable. It all depends on the conditions and place of their application. They can vary in appearance and in options that are tailored for a specific activity, such as body repair. The most popular and demanded on the market are rolling and portable types of jacks. This is due to their low cost and versatility. They can be used both in a home workshop and in serious companies.

In addition, rolling products are often used in tire shops, where it is possible to service several machines at once.

Ease of use and reliability of the design allow even an untrained motorist to work with such a lifting mechanism.

Model rating

Consider the most common types of rolling jacks that can be found on the shelves of many automotive stores.

  • Wiederkraft WDK-81885. This is a German-made low-profile trolley jack, which is intended for various points that inspect vehicles. There are 2 working cylinders in the design to increase the reliability of the design and reduce the likelihood of stalling. The product has a lifting capacity of 3 tons and a reinforced frame. When raised, it is 455mm high, which is quite a lot considering its low profile. During operation, one conditional drawback was noted, namely, the weight of the structure of 34 kg turned out to be large for the average auto mechanic.
  • Matrix 51040. This jack has an affordable price, due to which it has gained general popularity. The design of the product has only 1 slave cylinder, but this does not affect its reliability in any way, and in general it is in no way inferior to its two-piston competitors. The pick-up height is 150 mm, and the maximum vehicle weight should not exceed 3 tons. The raised height is 530 mm, which is quite enough for repair work. In addition, it has a lighter weight of 21 kg and is very easy to operate.
  • Kraft KT 820003. At first glance, this model does not inspire confidence at all and looks very flimsy and unreliable. However, this is only the first opinion, which is not true. It copes well with the declared load of 2.5 tons. Its main advantage is the price-quality ratio. Thanks to this, the described model has gained its popularity among garage craftsmen and small service stations that are engaged in small-term repairs. This product has a grip at 135 mm, which allows it to lift even low ground clearance vehicles, but the disadvantage of a low lift of 385 mm can upset the user.

With its very low weight (only 12 kg), it can be easily carried and rolled within the garage.

  • Skyway S01802005. Garage builders liked this little jack for its compact dimensions. Its carrying capacity is limited to 2.3 tons. Considering its own weight of 8.7 kg, this is a very good result. Pick-up height - 135 mm. The maximum lift height is 340 mm, which is the smallest of all. An insignificant height can cause some inconvenience to the master. We can say about this model that it is the smallest and most affordable, it is quite enough for a small workshop, and if the service station is still unknown and the service is just beginning to provide, then such a jack is quite a worthy inventory at first. This copy is sold in a plastic case, which is very convenient to transport.

How to choose?

Before you go to buy a rolling jack, you need to immediately decide what tasks are in front of you. Will it be a professional service, which may contain machines of different heights and weights, or is it a small workshop, or you are purchasing it exclusively for home use. The choice of the appropriate equipment depends on this.

The second important condition will be the dimensions of the jack itself and its handle. If the total length of the jack and the handle is greater than the distance from the side of the car to the wall, then it will be extremely difficult to use it. You can understand the permissible length of the product in working order by driving the car into the garage and measuring the distance from the side to the wall with a tape measure. The result obtained will be the maximum allowable length of the assembled mechanism.

Based on the above, we can assume that if the long jack does not fit between the wall and the machine perpendicularly, then it can be placed diagonally, and then it will fit perfectly. You can put it, but remember that it is unsafe, because in this case, when lifting the car, all the load will fall on 1 wheel, which is farthest under the car, and the direction of force will also be diagonally across the wheel, but it is not designed for such a load. This method of installation can lead not only to breakdown of the jack itself, but also to the fall of the car or at least damage to it.

Now it is necessary choose lifting capacity... Everything is simple here. For a car service, you need to have a solid reserve of carrying capacity, and for your garage a jack is suitable, which can lift a weight equal to 1.5 of the mass of your car. This small margin is needed so that the product does not work to its limit and will serve you as long as possible.

Lifting height very important, because there is very little sense from the jack, which is not enough to completely lift the wheel off the ground. It is best if your product can lift the weight to a height of 40 cm, and for services - by 60 cm.

Pickup height - don't forget about this parameter when choosing. You need to take into account the minimum ground clearance of the car you plan to service. The smaller this value is, the lower the car you will be able to pick up with this device.

It is best to purchase a similar product in a specialist store with a long-standing positive reputation.

In such establishments, the probability of purchasing a low-quality product is very low, and experienced sellers will help you make the final choice and advise if necessary.

Ask the staff quality certificate for the purchased products, this will save you as much as possible from buying a low-quality product. If you cannot be provided with it for any reason, then it is best to refuse to purchase in such an institution.

Be sure to take receipt and warranty card for purchased goods - this will allow you to exchange it for a new one in case of problems or return the money spent.

After purchase, be sure to examine your purchase very carefullyespecially for oil leaks. The pump and oil cylinder must be dry and free from visible damage. If you find cracks on the sealing lip, scratches on the working surface of the rod, then be sure to ask to replace this product. With such damage, it will not work for long.

An overview of the NORDBERG N32032 trolley jack for 3 tons is presented in the following video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture