Drying clothes: choosing the perfect option for the bathroom

In order to comfortably dry the washed laundry, today a lot of devices have been invented. They take up a minimum of space, can withstand heavy loads and can be almost invisible to the eye. In this article, the varieties of clothes dryers will be presented, and their features will also be considered.

According to the type of structure, all dryers are divided into simple (without additional mechanisms), folding (with special flaps, with which you can increase the area for hanging) and sliding / sliding (built-in grooves allow you to quickly move the dryer apart).

Wall-mounted dryers are the most popular product option. When installing, make sure the wall is strong and leave enough space to unfold the dryer. Not all models are heavy duty, but almost all offer space savings.

There are many types of wall dryers:

• inertial folding;
• in the form of an accordion;
• telescopic;
• lift type dryers;
• folding;
• stationary.

Inertial folding dryers are two pieces mounted opposite each other on the walls. A reel of ropes is attached to one, hooks to the other. The ropes must be pulled out and fastened to the hooks. In the folded position, such a model takes up almost no space, and when disassembled, it can accommodate a lot of laundry.

The accordion dryer is attached to one wall and, if necessary, expands according to the accordion principle. The role of ropes in such a dryer is played by thin tubes that do not leave creases on dried laundry. The number of these tubes varies from 5 to 10 pieces. Often, the dimensions of such models are not suitable for drying bed linen. Products are installed in bathrooms, they are very compact when assembled.

Telescopic dryers slide out using a different mechanism. Such models can be pulled out completely or half. They are designed for drying light items like socks, T-shirts, shirts.

The elevator dryer is the most versatile. It is often placed on the balcony or in the bathroom. It takes up little space, but you can place a lot of laundry on it. Such a dryer is more of a wall / ceiling type, because some of its parts can be attached to the ceiling. The design is as follows: two slats with metal tubes are attached to the wall, thanks to a special mechanism, these tubes can be lowered to the desired level, and then lifted with the laundry hanging.

The swing-out dryer also holds a decent weight, but has a slightly different design. It can be reclined at any angle. Folding or unfolding takes seconds, and you can choose the number and width of the partitions yourself. Often, the structure is placed in a bathroom or on a balcony.

A stationary wall dryer is the most common option. It consists of two planks attached to opposite walls. There are ropes stretched between them. It is most convenient to equip such a device on the balcony. The length of the ropes depends on the size of the balcony, it will also be equal to the length of the ceiling.

There is also a roller dryer, with which you can greatly facilitate the process of hanging the laundry. The slats are equipped with a roller system that allows you to pull the rope, thereby moving it in the direction of hanging.

Ceiling dryers have more sophisticated mechanisms than wall dryers and are used less frequently. Their main advantage is space saving. The design and size of such dryers can be made absolutely any.

There are several types:

• Dryer "liana" or "lift" has tubes for hanging, which were described above.
• The ceiling accordion has the same mechanism as the wall model, only it is fixed to the ceiling. They can use both ropes and tubes.

• Suspended. It is designed for drying lightweight clothes and has a very primitive device: a hook with a bar on which clothespins can be additionally attached. Usually these are short-lived plastic models, but there are more reliable variations in metal and wood.

Folding floor dryers are mobile and can be delivered in any room. In addition, when folded, they take up a minimum of space. The complete set of such models can be completely different. But the main elements are unchanged: a frame (of various shapes), fixed legs attached to it and a retainer that does not allow the dryer to suddenly collapse. Some models have castors for easy movement.

Floor dryers have many important advantages:

• There is no need to install and assemble the structure, you can start using it immediately after purchase.
• When folded, the dryer takes up very little space and can fit into a closet or closet. This is a significant plus for small apartments.
• Most models can withstand heavy loads.
• Standard models can be purchased at a fairly low price.
• Constructions made of quality materials can serve for many years, even with frequent use.
• The lightness of the design makes it easy to carry it if necessary.

Floor dryers can be vertical. In them, the planes with ropes are located one above the other. Their height can be adjusted and reach two meters. Such models are called whatnots, they are often installed in shower stalls.

Portable dryers are suitable for small apartments (rooms). They are convenient for their compactness and can be installed on a battery, bath, door, cabinet. The only drawback is that you won't be able to dry a lot of things at a time.

If there is a need for quick drying, electric models are perfect. In them, the process is faster, in comparison with rope structures, due to heating.

Electric laundry dryers for the bathroom are very popular today. The structure does not need to be connected to a hot water supply, unlike a standard towel dryer (coil). All you need is network access.

Thanks to the oil, the tubes are heated evenly and damp things dry very quickly.

The owners of such models highlight the following advantages:

• The laundry gets a pleasant aroma after drying.
• The heating temperature can be adjusted.
• A model with an ultraviolet lamp or ionizer can be purchased.
• The dryer can be mounted anywhere in the bathroom, because its device is not connected to the pipeline and does not depend on the supply of hot water.
• The operating time is manually adjusted.
• The temperature inside the tubes does not rise above 60 degrees. This allows delicate fabrics to be gently dried and not burned when touched.
• An electric dryer can be useful as an additional heat source.

Of course, some fabrics cannot be dried in such devices. But this is often written on the tag of the thing.

There are miniature models of dryers that need to be installed directly on the bath. Usually they have rubber tips on the legs, which fix the structure well and prevent it from rolling off the edges.

In principle, such a dryer is similar to a sliding floor model, only after use it is removed. They are also called umbrella models. On average, they can withstand up to 10 kilograms of wet clothes.

Such miniature options are well suited for drying small items for the entire heating season. The heat from the batteries dries out pretty quickly at no cost. Battery dryers can replace the electric model in winter. They are small and can be stored anywhere.

The first thing you should pay attention to when choosing such a dryer is the fastening mechanism to the radiator. In many apartments, there are still old-style batteries in the form of an accordion, and not every one of them is suitable for fixing such a structure. First you need to measure the battery and compare its length with the length of the dryer. It is also worth considering that a poor-quality dryer can deteriorate under the influence of the high temperature emanating from the battery.

Outwardly, such a dryer is very similar to an ordinary washing machine. The mechanism includes a drum in which the laundry is dried. Drum dryers dry faster than all other varieties - from 30 minutes to an hour. But there is a nuance: clothes and linen after such drying will be very wrinkled, and it will be more difficult to smooth them.

Another controversial issue is the need to connect the drum dryer to the sewer system in order to be able to remove moisture. This requires additional financial costs and the involvement of specialists.

If we consider the models based on the method of their attachment, then there are few options. The structure can be built into the wall, suspended from the ceiling, or mobile.

The structure consists of plastic tubes, inside of which ropes are stretched. The dryer is fixed to the ceiling, and the slats are easily lowered to hang the laundry and then raised by pulling the required ropes. The mechanism can be fixed both above the bathroom and on the balcony.

The easiest option for self-production: the required number of hooks are attached to opposite walls, and clotheslines are pulled between them. The tension can always be adjusted.

The material from which the dryer is made is of great importance. The service life of the product, its strength and susceptibility to moisture depend on it. There are some of the most common options:

• Aluminum dryers. They are lightweight, but not stable enough. To prevent aluminum from turning black over time, manufacturers cover the models with a layer of polymer.But this coating, as practice shows, cracks after a while.
• Dryers made of stainless steel. This material is ideal for such designs. Moreover, both the body and the strings can be made of steel. It is very strong and durable. The disadvantages include its high weight (which will increase stability for floor-standing models) and cost.

• Plastic dryers. The plastic version will not last long, but it is good for its cheapness and lightness. Models are often used to dry lightweight items (socks or underwear).

• Wooden dryers. From an aesthetic point of view, these are the most stylish models. But to extend their life, the board must be regularly coated with protective solutions.
• Combined. Multi-material dryers are less common and often homemade.

If the apartment has the necessary tools, then the dryer can be assembled by yourself.

Here is a step-by-step instruction for making the simplest design:

• First, you need to attach two wooden planks to opposite walls (for example, on a balcony).
• Then, screw rings must be screwed into these strips. Each rope will require two pieces (one on each side). The number of rings in a row depends on personal wishes and the length of the planks.
• In order for the screws to fit well, holes must first be made under them. The diameter should be slightly smaller than the screws themselves. These holes must be thoroughly cleaned before screwing in.
• If there are gaps near the screws, they must be repaired to increase the strength of the entire structure.

For a homemade dryer of this type, you can not cut the rope into pieces, but simply take a whole one and stretch it through all the rings. Before starting, it is important to carefully examine the walls of the balcony for cracks and voids. If they are, they must be repaired, otherwise the wet linen may one day outweigh, and the whole structure will collapse. It is also advisable to make markings on the walls, taking into account the future location of the dryer.

It will be more difficult to make a folding dryer. But, following the step-by-step instructions, you can get it done pretty quickly. For such a design, you will need wooden planks, rods, a sheet of plywood or drywall, furniture hinges, hooks, fasteners and paint.

Procedure:

• First you need to drill holes in the opposite parts of the frame, which in diameter will be equal to the cross-section of the rods.
• The rods are inserted into the holes. At the ends, they can be thinned to make it easier to fix them.
• Next, you need to assemble the frame, fastening the elements together with nails.
• The base of the dryer is being prepared, which should be 12-15 cm longer than the frame in length and width.
• The lower frame plank must be attached to the base using furniture hinges.
• Then the entire structure must be painted with water-based paint and allowed to dry completely.

• On the side opposite from the hinges, a latch is attached for fixing.
• A folding structure is installed. It is important to determine the optimal angle for the mechanism so that the clamshell does not take up too much space.
• Next, you need to hang the hooks for small items on the side of the frame.
• The dryer is fixed to the wall with screws.

You can also make a floor dryer with your own hands, which is very similar in design to a book-table. It may seem that such a structure is quite difficult to manufacture, but this is not the case.

For manufacturing you will need:

• plastic-lined chipboard or MDF boards (two side - 60 by 20 cm and two above and below - 70 by 20 cm);
• self-tapping screws;
• any details that act as handles;
• steel pipes for hanging laundry (20 x 2 mm and 18 x 2 mm);
• stainless steel rods (10-12 pcs);
• steel pipes for a support that will fold back (6 pcs);
• steel pipes for the frame (4 pcs 60 cm and 4 pcs 70 cm);
• steel pipe 18 by 2 mm;
• nuts;
• corners (4 pcs);
• wheels (4 pcs).

Procedure:

• The boards that form the future frame must be fixed to each other using steel corners and self-tapping screws.
• Wheels are mounted to the lower part of the structure.
• Next, you need to connect the entire body using the ties on the top. You will need hinges to make the frame and body.
• The next step is to connect the rods and the frame. It is important to maintain the same distance between parts.

In order to avoid the appearance of rust, it is advisable to paint the assembled dryer. The structure will regularly come into contact with moisture, it is important to extend its service life by painting. Beforehand, the entire surface must be degreased (for example, with acetone) and covered with a primer. The best option would be automotive or acrylic paint, applied in two layers.

For information on how to make a do-it-yourself tumble dryer out of wood, see the next video.

You can highlight the main characteristics that you should pay attention to when buying a tumble dryer:

• Working surface area. It is the sum of the lengths of all rods (ropes) in the unfolded state. The higher this value, the more massive and more expensive the model will be.
• The number of rods (ropes). Their number determines the width of the model.
• The presence of tiers and their number. Multi-tiered designs allow you to place a lot of laundry at a time and save space. But their cost will be appropriate.
• Maximum load. This indicator is determined by the type of design and material of manufacture. Accordingly, the more load the model can withstand, the longer it will last. The simplest wall dryers usually hold about 7-10 kg of things, and the folding and "vines" floor dryers - up to 25 kg.
• Additional details. These include transport rollers for floor structures, which make them easier to move. The casters are usually made of rubber or plastic.

• The presence of compartments for drying shoes. Standard dryers with long string spacing are not very convenient for storing shoes. Therefore, if you plan to dry your shoes every day, you should take care of the presence of such compartments in advance.
• When choosing a dryer, you need to clearly know the future place of its installation. For balconies, "vines" and conventional ceiling mechanisms are more suitable. For placement in the room - floor dryers.
• When buying, it is important to pay attention to the quality of fasteners and ropes. These are precisely the details on which the strength of the structure and its service life directly depend.

If the place for the location of the dryer is a closed balcony, then some factors must be taken into account in advance:

• the dimensions of the balcony and its heating;
• the maximum weight of the laundry to be dried;
• wall and ceiling decoration material, repair features.

If it is rather cold on the balcony, then you should not fasten the structure very close to the ceiling, otherwise the clothes will freeze. The thickness and quality of fasteners directly depends on the weight of the items to be dried. For lightweight clothing, regular ropes and a plastic base will work.For blankets or winter clothing, thick ropes and a metal frame are needed.

The following rules must be observed when using dryers:

• If you plan to hang heavy bedding on the ceiling dryer, then you should not opt ​​for models with aluminum slats. Most likely, they will not withstand the loads and will simply bend.
• Before the final installation of the dryer on the balcony, you can fully open the windows and check if they will touch the hung laundry in the future. This is true for owners of spacious balconies in which this can be avoided.
• After each use, wipe the entire structure of the dryer first with a damp cloth, then dry.
• If the dimensions of an apartment or a bathroom are very small, then you should pay attention to vertical dryers. They do not leave scratches on the floor, take up a minimum of space, and are easy to assemble.
• It is important to thoroughly wring out the laundry before hanging it. This will reduce the load on the dryer and keep the floor from dripping from the clothes.
• Rust can appear on metal structures with frequent use. At the first signs of it, it is necessary to immediately treat this place with an anti-corrosion solution, and it is better to lubricate the entire dryer entirely.

• When buying a dryer, it is very important to consider the distance between the ropes (rods, tubes). The greater this distance, the faster the laundry will dry and the more convenient it will be to hang it. The optimal distance is 7-9 mm. If this value is less, things will touch each other, and this will significantly increase the time they completely dry. In addition, some items will fade and need to be hung separately.
• It is not recommended to buy a dryer, the rods of which are attached by welding, because this most often leads to corrosion. An excellent alternative would be rolling and plastic caps at the joints. With such a system, puffs will not form on the clothes.
• If you do not plan to clean the dryer for a long time, then you can make sure that it fits into the interior of the room by choosing the color of the model to match the tiles, furniture or curtains.
• Another nice bonus is that drying things indoors in winter humidifies the air well.

• To extend the life of your dryer, it is important to keep track of how the ropes are frayed or structural parts fail. This is especially true for plastic models that wear out much faster than metal ones. A good manufacturer will design the parts subject to wear in such a way that they are easy to replace.
• The most common malfunctions are bracket deformation and gear wear. Again, this is very common with plastic models. You can buy similar parts and repair yourself. Of the tools, you only need pliers and a screwdriver.
• To replace the roller wheel, you need to pull out the pin on which it is holding. The new gear must be secured with the same rod.
• Replacing the cords is straightforward: they pass through the bracket just as easily as they were during the initial assembly.
• If, when using the dryer, a squeak is periodically heard, then it will not be superfluous to lubricate the friction points with technical oil. It's just important not to overdo it and wipe off the leftovers so as not to stain your clothes.
• The problem of a broken bracket is easiest to solve by purchasing a new dryer.
• If you can't fix the dryer yourself, you can trust the experienced craftsmen. They will quickly find the right part and save time.

• If there are a lot of delicate fabrics in your wardrobe, you should pay attention to electric dryers with a built-in thermostat. In this way, the risk of damage can be reduced to a minimum.
• If there is a need for drying hats, when choosing a model, you should pay attention to the presence of additional holders for small-sized things.
• Some models even include an air ionization function. For this, an ultraviolet lamp is built into the structure.
• Although manufacturers assure the complete safety of their products, it is better to play it safe and not allow children to turn on and off electric models on their own. But often the maximum temperature of such models does not exceed 60 degrees, and there is no risk of getting burned.
• If you plan to place an electric dryer on the balcony, then you should first waterproof it in order to prevent moisture from entering the mechanism from the outside.
• When choosing an automatic dryer, you need to pay attention to the marking, which indicates the energy consumption of a particular model. The letter "A" denotes the most economical models, the letter "G" - the most energy-consuming and powerful.

• If the issue of saving space is acute, then you can give preference to installing a dryer outside the apartment, that is, the street version. It is often installed on the outside of the balcony. This option is not very convenient because:
• The ability to dry your laundry is directly dependent on the weather.
• There is no certainty that the clothes will not be blown away by a strong gust of wind
• From an aesthetic point of view, this design does not decorate the apartment at all.

• It is important that all available fasteners for the dryer are made of metal. Many manufacturers make them plastic, but this only saves manufacturing costs and shortens the life of the structure.
• In a liana type dryer, the ropes can be made of metal or nylon. And here it is worth making a choice in favor of metal. But if, nevertheless, the choice fell on nylon, then for a long service life they should be no thinner than 3 mm in diameter.
• In order to understand the structure and properly equip it, you must read the instructions. Even if the manufacturer is foreign, the inserts must be duplicated in Russian. If the instructions are incomprehensible or completely absent, you should think about the manufacturer's conscientiousness and the quality of the goods.
• Particular attention should be paid to the mounting bolts. Often the complete set includes plastic dowels and rather short bolts. With the length of the tubes over 1200 mm, the length of the bolts may simply not be enough for reliable fixation. Therefore, when purchasing a massive model, it is better to immediately take care of the strength and buy good anchor bolts.

• When caring for electric dryers, it is imperative to wipe the edges of the air ducts with a simple rag (napkin) without the use of detergents and chemicals.
• Rotation of the tank in a drum dryer can be one-way or two-way. The latter ensures uniform drying of clothes and speeds up the drying process itself. It is important that the tank is made of stainless steel or other durable metal, otherwise the dryer will not last long.
• Each automatic dryer has a filter. It accumulates threads, lint, wool and other small details. When choosing, you need to take into account that this filter is easy enough to get out, because it will have to be cleaned regularly by hand.
• Some automatic dryers even have an ironing mode. Items rotate in a drum in a certain way, blown with cold air and leave the dryer completely ready for use.

It is easier to decide on the right option after familiarizing yourself with the most demanded models of the best manufacturers. Pay attention to the detailed characteristics of high-quality dryers with different functionality.

This wall / ceiling dryer will help you make the most of the space above your bathroom. It has a fairly strong frame and reliable fasteners.Manufacturing material - stainless steel (brackets and rods), plastic (rollers) and textiles (hanging cords). This model does not need any special care, it is enough to simply wipe it down occasionally. Humidity is not scary to her, so many people install it in the bathroom.

The brackets are fixed to the wall or to the ceiling. The roller mechanism allows you to quickly and easily hang up clothes by alternately lowering the plastic rods. The total length of the entire surface for linen is 9.5 meters and can accommodate up to 15 kg of linen. After drying, there are no creases on the clothes thanks to rods with a diameter of 1.2 cm.

Floor model made of stainless steel. Suitable for installation in any room. The total length of the steel slats is 27 meters. The package includes flaps that can be opened, thereby increasing the useful surface area. The dryer can be pulled apart and curtains or bedding can be hung.

Protective corners are attached to the legs to prevent scratches on the floor. The dimensions of the dryer in the unfolded state are 198 (258) cm by 57 cm by 102 cm.In the folded state - 116 cm by 57 cm by 10.5 cm.

Another variation of the floor-standing model from the manufacturer Gimi. The dryer is equipped with a telescopic sliding system, wheels and plastic holders for small items. The impressive indicator of the maximum load is impressive - 25 kg, the total size of the working rails - 20 meters. The model is made of stainless steel with a polymer coating and weighs 5.35 kg. The dryer is easy to fold and does not take up much space when assembled.

This model is chosen by those who often wash and dry a lot of things. It is especially relevant for a large family, where washing is becoming a daily activity. This dryer belongs to floor structures and has a folding mechanism. It can be installed in any corner of the apartment.

The design consists of three main elements: a central large compartment containing 8 strong rods, and two compartments along the edges for hanging smaller items (each with 5 rods).

The useful length of this model is 16 m, and the maximum load is 20 kg. The metal structure will not bend under the weight of wet laundry. There are also a couple of plastic parts in the package, but they are placed on the legs and perform the function of protecting the floor from scratches. The dimensions of the dryer are 128 cm x 55 cm x 101 cm.

This dryer is very compact, yet it has a useful length of 10 meters and is often installed in a bathroom or on a balcony under the ceiling. The model includes 5 rods of a rather impressive diameter - 1.2 cm. This allows you to dry clothes without the formation of creases. The structure itself is mounted to the ceiling with plastic brackets with rollers, and the rods are placed horizontally.

This model is famous for the size of its useful space - more than 20 meters. It consists of 6 ropes 3.6 m long. Such dimensions allow you to dry several sets of bed linen at once. The most interesting thing is that you can choose the length of the ropes yourself, focusing on the size of the bathroom or balcony. The tension level can also be selected and locked.

The model is equipped with a special mechanism that allows the ropes to completely unwind. Thus, you can "hide" the dryer in any room. Its parts are attached to the opposite walls with screws and dowels. Durable polyester ropes can withstand loads of up to 15 kg.

The floor dryer has one main fundamental difference from other models - the vertical design. This feature allows it to be placed in a shower stall. The dimensions of the model are 160 cm by 60 cm by 60 cm. The model is rather narrow, and this feature limits its functionality. The maximum load is only 6 kg (about the same as a standard automatic dryer), but the average cost of these models is higher than that of conventional folding dryers.

This dryer has an interesting feature - the frame is made of natural beech. The height of the structure is also noticeably different from the standard - 174 cm. On the sides and in the center there are folding surfaces with slats.

Design advantages:

• When folded, it has a very compact size - 18 cm by 50 cm.
• The total length of the useful surface is 25 meters.
• The diameter of the tubes is 8 mm, which prevents creases in the fabric.
• Wheels with protective nylon pads allow you to move the dryer without damaging the floor.
• The middle shelf can be used as a table on which it is convenient to fold laundry taken from the side surfaces.

Disadvantages:

• has an impressive weight - 7.8 kg:
• the average cost is quite high:
• in working order takes up a lot of space.

This stretch dryer is very compact and when folded looks like a small plastic case. Its dimensions are 7 cm by 8 cm by 50 cm. The structure can be attached to the wall in the bathroom or any other room: it will be practically invisible.

Design advantages:

• It does not spoil the overall appearance of the room when folded.
• The tension on the cords can be adjusted.
• Maximum load - 7 kg. For the existing dimensions, this is a very good indicator.
• The strings unwind automatically.
• The product is sold at a reasonable price.

Disadvantages:

• Cords begin to sag over time.
• It is not always convenient to adjust the tension of the strings due to the fact that they are connected together.

The universally recognized universal model. It was designed for wall mounting, but can be fixed horizontally. The set includes 6 slats, 160 cm each, secured with nylon cords. They allow you to raise and lower the bars to the desired height.

Design advantages:

• The design is as simple and durable as possible.
• Tube-shaped crossbars do not wrinkle clothes.
• The slats are covered with an anti-corrosion compound.
• All necessary fasteners are included.
• Low cost. Literally everyone can afford such a dryer.

Disadvantages:

• White cords get dirty pretty quickly and lose their presentable appearance.
• The product is not suitable for drying blankets or bed linen.

This rolling dryer is equipped with 3 shelves with 6 bars each. The dimensions of the model are 143 cm by 64 cm. The total length of the used surface is 20 meters.

Design advantages:

• The reliable frame can withstand a load of up to 30 kg.
• The height of the beams can be independently adjusted and fixed in the desired position.
• The castors make it easy to move the model.
• When folded, the width is only 22cm. You can store it simply by leaning it against the wall or hiding it in a closet.
• The set includes 72 hooks for fixing small items.
• The impressive 7 cm spacing between the bars allows clothes to dry faster.
• The construction weighs only 4.6 kg.

The disadvantage is that all fasteners and holders are made of plastic, which cannot guarantee a long service life of the structure.

This is a fairly popular electric folding model. It has the familiar design of a table dryer with folding wings, but it dries things many times faster thanks to the built-in electric heater.

Design advantages:

• The side panels rise quite high, which allows you to dry bulky items (for example, long curtains).
• The strings are heated to an optimal temperature of 50-55 degrees Celsius.
• The maximum load of the dryer is 15 kg, which is a very good indicator for electric models.
• Economical energy consumption - about 0.22 kW.
• The total length of the working surface is 12.5 meters.
• The price of the product is quite affordable compared to other electric dryers.

• The telescopic wall dryer is a great option for placing over a battery. When folded, such a model will not attract too much attention, but when unfolded it will be able to accommodate a sufficient amount of laundry.

• The design of the foldable floor dryer is very interesting. Such a thing is more of a decoration than a practical household item: the use of wood for the frame of the dryer is undesirable. But such a model, even with things hung on it, looks very stylish and original.

• The model, which is popularly called a bookcase, has a shelf for drying shoes, which is very practical. Of course, the shelf is not designed for hanging bedding, but it is great for drying simple clothes. It is also nice that the structure folds to a very small size.

• A tumble dryer that attaches only to a bathtub is often used to dry small towels or rags. It is quite convenient in that the water flows directly into the bath, and you do not need to put something underneath or constantly wipe the floor.
• The folding design is convenient primarily for its vertical position and the ability to place clothes directly on the hangers. This is useful for drying clothes that cannot be dried conventionally.

• The tumble dryer looks very stylish and complements the interior. In the folded position, it is not even visible that this is a dryer.
• The standard design of the liana dryer looks interesting. If you choose the color of the model for the interior decoration of the balcony, then in the folded position it will hardly stand out.

• The easiest option is retractable balcony dryers. When the laundry is not hung, it is almost invisible. Some owners paint the planks with the same paint as the walls to mask the fixture as much as possible.

For information on how to choose the right tumble dryer, see the next video.