How to strengthen the TV antenna signal at home?

Content
  1. Antenna principle
  2. Reasons for a weak signal
  3. How to increase the power?
  4. Tips & Tricks

How often does a simple TV viewer, with poor TV broadcasting, wonder whether this is a breakdown of the TV, a problem with the TV cable, or the interference is due to poor operation of the TV antenna.

You should be aware that if the cable or TV is damaged, the picture and sound disappear completely, but if there is interference on the screen, or there are complaints about the quality of the image or sound, then the matter is most likely in the poor quality of the TV signal reception.

In this case, you need to check the antenna and, possibly, strengthen its signal.

Antenna principle

An antenna for a TV is necessary to receive electromagnetic waves of high frequency in the decimeter range, with the help of which a TV signal is transmitted from a certain transmitter, for example, from a TV tower. Electromagnetic waves are electromagnetic waves traveling at a finite speed along a sinusoidal path, they allow information to be transmitted wirelessly.

The antenna has a special mustache that reads the waves passing through them and causes an induced voltage in its core.... The different polarity of the two halves of an electromagnetic wave, separated when passing through the antenna, causes an electric current to pass in the receiving circuit and, with the help of resistance, creates a strong and processed impulse in the TV radio channel, which is then transmitted to the TV screen by a signal with an image and sound.

The basis that transmits energy in an electromagnetic wave is photons - massless particles of energy that have an electromagnetic field.

Their movement in space distinguishes two types of sine waves: magnetic and electric. These vibrations always occur perpendicular to each other. If the electrical oscillation is parallel to the horizon, and the magnetic oscillation is vertical, then they speak of horizontal polarization. If on the contrary, then we are talking about vertical polarization.

In Russia, horizontal polarization is usually used when receiving a television signal, since it is believed that the main interference - natural and industrial, is located vertically. That's why it is best to install the TV antennas horizontally.

Reasons for a weak signal

Antennas are of 2 types: satellite and television.

A good signal of a satellite dish often depends on its diameter - the larger it is, the better the frequency of the received on-air signal. White dots or stripes on the screen indicate a weak signal due to a variety of interference on the street - tall buildings, trees, due to incorrect rotation of the satellite dish and loss of the repeater signal.

TV antennas are indoor and outdoor.

The quality of room reception is affected by the proximity of the TV tower. Ideally - to see the tower with the naked eye from the window.

The distance of 10-15 km also provides reliable reception and good picture and sound quality. But if you are in an urban area in a residential building no higher than the 3rd floor, and besides, you are surrounded by high-rise buildings and tall trees, then you are not guaranteed a good image.

An outdoor antenna will provide good image quality with an amplifier and a more optimal receiver design... When choosing it, you need to take into account the effect of atmospheric precipitation on it and the strength of wind gusts so that nothing interferes with the confident reception of the TV signal and does not change the direction of the antenna itself in relation to the television transmitter. And also a closer location of the broadcasting tower is desirable for her.

Another reason for poor broadcasting can be the use of a TV cable that is too long from the receiver to the TV.

How to increase the power?

To improve the picture quality of your TV at home, you need to improve the quality of the received signal. Originally it is necessary to bring the antenna as close as possible to the transmitting device or change its direction, more accurately direct it to the trajectory of the transmitted signal.

And all possible obstacles must be eliminated... For example, removing disturbing tree branches or raising the antenna higher on the roof of the house. You can use a mast to increase the height of the transmitter and improve the received TV signal.

Pay attention to the cable - maybe you need to reduce its length.

The distance from the antenna to the TV should not exceed 10 meters.

You can replace the TV cable with a new one if the old one is more than 10 years old. And if the cable has a variety of connections using twisting or splitters, then this also affects the quality of viewing.

There should be no metal objects near the antenna that conduct electricity... Removing these items will enhance the received signal.

It is advisable to place the indoor antenna closer to the window and high, eliminating barriers to the passage of electromagnetic waves. This type of indoor TV transmitter is only suitable for areas with strong signal reception.

An outdoor antenna can be improved by using one of the types of amplifiers. They are:

  • passivefor example, increase the reception area by using a wire;
  • active - amplifiers powered by an electrical network.

If a satellite dish, with proper installation and selection of equipment, had problems with video transmission from the very beginning, then a larger diameter dish can be used.

But if the interference appeared in the process of using this type of transmitter, then do it yourself, you can fix and improve the signal quality by following a series of actions.

  1. Check if any part of the plate has deteriorated under the influence of precipitation. Remove rust, replace broken.
  2. Check if the satellite dish settings are out of order in the direction of the transmitting TV tower. Aim to the desired range.
  3. Make sure there are no external obstructions to the signal - adhered foliage, snow. Obstacles in the form of tree branches, new tall buildings. Clean or outweigh the plate higher.

If for any type of antennas all external influences on the antenna, on its location, did not bring an effective result, then to strengthen it and improve the quality of the image and sound, you need to connect an antenna amplifier.

The active amplifier is connected to the electrical network and is located as close as possible to the antenna, preferably in a place protected from atmospheric influences. So, the antenna itself can be located on the roof, and the amplifier - near the attic window in the room. They are interconnected by a coaxial cable.

An amplifier can be bought in a store, choosing the necessary one based on such parameters as the distance to the transmitter, the features of the antenna itself, the type of electromagnetic waves on which this antenna operates.

And you can also increase the received signal by using amplifiers made by yourself. Craftsmen can improve the antenna using aluminum lemonade cans, assembling a structure on a clothes hanger, or using a Kharchenko antenna.

Tips & Tricks

If the repeater tower is less than 30 kilometers away, then external amplifiers, even made by hand, can be used to amplify the signal. But if it is more than 30 kilometers away, then you will need a powerful amplifier.

The amplifier is placed as close to the antenna as possible.... But if you have to place it outdoors, then remember that its service life is no more than a year, since its parts are subject to oxidation, corrosion and begin to interfere. And also the amplifier itself can create noise and interference, so when buying, you need to pay attention to the ratio of noise figure to gain.

When buying a satellite dish, you need to keep in mind that made of aluminum is not only lighter, stronger and more durable than steel, but also gives a high-quality signal with a smaller diameter... Of course, you need to remember that it is more expensive than steel.

For city apartments, you can choose any type of antenna, and for use in the country, satellite is better suited - it does not depend on the distance to the television tower.

How to amplify the signal of terrestrial television, see below.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture