Hairdryer nozzles

Content
  1. Characteristic
  2. Views
  3. Terms of use

Repair and construction work in the modern world requires a huge variety of all kinds of devices and tools responsible for a particular process. Manipulations that require the injection of a stream of hot air in large quantities, which can be done with a construction hair dryer, are no exception. With just one function, this tool can solve dozens of tasks: from simple drying of a papered wall to air welding of linoleum. Such widespread use is possible thanks to the variety of special nozzles for the hair dryer, which can be purchased complete with the device or as a separate product.

Characteristic

The hot air gun itself is a fairly simple tool, which differs from a regular hair dryer only in power, consists of an elongated body with an electric motor inside and a small fan that sends air through the heating elements. It can be both quite large, used for professional construction work, and household, suitable for ordinary apartment renovation.

The body of such a hair dryer has a large diameter and ends, as a rule, with a grill that protects the nozzle from debris. The air stream escapes from it in a straight line and at an equal speed. Such a design is not always suitable for solving the assigned tasks, and various nozzles for a building hair dryer come to the rescue.

A nozzle, or, as it is also called, a nozzle, nozzle, nozzle, is an additional element that allows you to change the direction, flow force and temperature of the air blown out of the hot air gun. Some are sold with the instrument itself, some can be purchased separately, and some can be made by hand.

Such homemade nozzles are often used if they are required not for permanent, but for one-time work, and it is impractical to spend money on them.

Views

On the market for building materials and tools, there are many different types of nozzles for a heat gun, which differ in their technical purpose and are designed for certain types of work. The quality and speed of work depends on the correct selection of the nozzle, so before you go shopping, you should carefully study all the varieties and decide which specific nozzle is needed.

Focusing

This is the simplest narrow nozzle that allows you to reduce the width of the hot air flow and heat parts in a spot. It looks like a small metal cone with a smaller hole at the end. Such a nozzle is quite versatile, but most often it is used when soldering copper pipes and repairing them. Various cracks and chips are sealed using special plastic tapes (welds). Under the pressure of hot air, the plastic melts and becomes elastic, and after cooling it solidifies and firmly fixes the parts.

Flat

Another of the standard hot air gun nozzles, which forms a wide flat air stream. It is often used to remove old coatings such as wallpaper, paint or putty. In addition, with the help of heating with this nozzle, any structures made of polystyrene, polyvinyl chloride and other plastic materials can be bent and deformed into the desired shape.... Flat nozzles may vary in size and nozzle width.

Reflex

Such a nozzle is often used when installing a heating or sewer system. With its help, it is easy to warm up and bend any self-compressing hoses and pipes. After heating, they become soft and easily bend at the desired angle, and after cooling, they harden and retain their curved shape.

Crevice

This nozzle is used when working with PVC or foil sheets. Its other name is "slotted nozzle", from the term "slot" denoting a groove (slot), with the help of which parts are connected, throwing one on top of the other and welding them into a single sheet with hot air.

Cutting

This nozzle is needed for working with foam, which is easy to cut if heated. With the help of this nozzle, both straight cuts and curly cuts and holes are made, which allows you to create many different decorative parts of a budget price without special expensive equipment.

Glass protective

This is a special curved (side) nozzle with built-in protection, allowing you to work with glass or other surfaces that do not withstand high temperatures. With its help, it is easy to remove the remnants of varnish, putty or even enamel from the surface of the finished product.

Mirrored

Like the focusing one, it is necessary for joining plastic parts by welding. She processes the joints of products, which then close, creating a single canvas after solidification.

Welding

A special attachment, similar to a mirror, but used to connect various synthetic cables or linoleum sheets. It differs from the previous one only in the shape of the case, which is convenient for clamping and connecting wires and flooring sheets, and not massive plastic parts.

Reduction

Often comes in a set with other nozzles and serves as a kind of adapter for carved or slotted nozzles, allows you to make the air flow even more directed. It can also be used independently for spot welding of plastic products.

As you can see from the description, some nozzles can be interchangeable, and some have a rather narrow specialization, often only necessary for professionals.

Simple nozzles can be easily made at home, but most often they are sold already bundled with the hairdryer itself.

Terms of use

Using a hairdryer with a nozzle is no more difficult than a regular one. There are several recommendations that should be followed in order not to spoil the part and get the highest quality result.

  • The distance from the tip of the nozzle to the surface to be treated should not be less than 20–25 cm.
  • Before heating, the surface must be cleaned of dirt and degreased.
  • When working with polymer parts, before heating, it is necessary to additionally clean the joint with sandpaper and a soft cloth.
  • It is best to cut uneven edges of the connected parts without waiting for the final hardening, so the material is easier to cut with an ordinary construction knife or scissors.
  • A hardened joint can be sanded down for a cleaner look.

The very process of attaching and removing the nozzle is not particularly difficult. The selected nozzle is brought to the nozzle of the hair dryer and screwed in until it clicks. After finishing work, you can also easily remove it. The main thing is to adhere to simple safety rules.

  • When working, gloves, goggles and a mask must be used to protect the skin and mucous membranes from burns and vapors.
  • The tool wire must be uncoiled, free from defects and bare areas, the nozzle must not be rusty, must not have cracks or chips.
  • It is strictly forbidden to close the air intake grilles, otherwise the hair dryer may overheat and even ignite.
  • A working hot air gun must not be directed at people and animals, lean against the material close to, use near flammable products and materials. Never look into the nozzle when the device is switched on with or without a nozzle.
  • Before putting on or removing the nozzle on the hair dryer, you must wait for it to cool completely.
no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture