Dimensions of the wardrobe

The tendency to order furniture for your home has been popular for many years. Nowadays, ready-made furniture of a certain type is rarely bought, especially this applies to wardrobes.

These products, like no others, require an individual approach. The customer himself selects the color and content of the wardrobe, as well as its configuration, so that it fits perfectly into the interior design. At the same time, the contractor needs to know exactly the size of such furniture and the ability to "fit" it into a specific place.

The sliding wardrobe is in great demand due to its practicality, functionality and attractive appearance. Today, many prefer author's design, but, nevertheless, each model must comply with generally accepted standards, although you can deviate slightly from them.

General criteria for calculating cabinet dimensions:

• The height of the furniture usually corresponds to the height of the person. The common cabinet height is 2.1 m.Some models reach heights from 2.4 to 2.5 m.
• The depth is approximately 60 centimeters.
• The width of the shelves can vary from 40 centimeters to 1 m. They cannot be made wider, since they can bend under the weight of the clothes.
• The hanger bar usually has a length of 80 cm to one meter. If you make it longer, then it will bend during operation.
• The depth of the shelves according to general standards should be 50 cm.
• The bar for short clothes should be 80 cm, and for long ones - 160 cm.
• The boxes should be 10-30 cm high and 40-80 cm wide.

In order to functionally use the area of ​​the room, you should order a sliding wardrobe individually according to special dimensions. This approach will allow you to hide a blind corner, free space near the doorway, a niche with uneven corners, and decorate the interior.

Built-in models are very popular because they take up little space in the room. Radial and corner wardrobes look beautiful and impressive.

If you turn to a designer to design your future furniture, then you can choose the inner filling of the cabinet for your personal requirements, as well as choose the external design of the model. You will be able to provide places for the location of non-standard items.

The design of the wardrobe can be varied. It all depends on the imagination of the designer and your preferences.

To use the working space of a room competently, many designers suggest opting for a cabinet design with variable depth.

This model is divided into zones. The wardrobe section is deep enough to place your clothes comfortably. The next section can be used for books or dishes, so there is no need to make it deep. This way you can leave more free space.

To correctly calculate the dimensions of the wardrobe, first you need to decide what material it will be made of... The usual building materials are presented in standard sizes.

Chipboard sheets are produced in the following sizes: 2750 x 1830 mm, 2800 x 2700 mm and 2440 x 1830 mm. The part can have a maximum height or width of no more than 2740 mm. The choice of material affects exclusively the width of the model, but the depth does not depend at all on the materials used.

Craftsmen use a variety of options to connect small parts. You can use several cabinets, which will be united by a common sliding system.

The generally accepted depth of the cabinet is considered to be 60 centimeters. When designing, several factors should be taken into account that directly affect the depth of the furniture:

• With a standard depth of the model, excellent spaciousness and ease of use are guaranteed.
• The large depth, which can reach 90 cm, is characterized by inconvenience, since things near the wall will be quite difficult to get.
• A narrow 30-centimeter cabinet is not spacious, since this depth does not allow for many things to be placed. Such models are characterized by poor stability, especially tall ones, so they additionally need to be attached to the wall. Experts advise making a minimum depth of 40-50 cm.

It is also worth taking into account the fittings when calculating the depth of the cabinet. Its depth is always 10 cm less than the overall dimensions of the product - this place is occupied by a sliding system of facades.

The height of the wardrobe can be different. But, if we talk about the standard size, then with a ceiling height of 2500 to 2700 mm, furniture usually reaches a height of 2000 to 2500 mm. Available in standard heights or taller versions of 2700 mm and practically touching the ceiling.

The maximum height of the wardrobe can be no more than 2780 mm, since a regular chipboard sheet has exactly this size... If you want the product to be from 3 to 3.5 m, then you will have to make mezzanines.

The width of the wardrobe is directly dependent on the size of the profile. The standard parameters are a depth of 60 cm, and a width of 0.9 to 2.4 m. Although there is no set norm, and each manufacturer offers its own version.

For a bedroom, a wardrobe with a width of 2200 mm would be an ideal choice, since this option will allow you to correctly arrange the entire wardrobe, as well as other items. For a family that includes three people, you can use a wardrobe with a width of 2 m. Comfort and convenience are guaranteed for all family members.

A wardrobe is ideal for a nursery or a hallway, the width of which can vary from 140 to 160 cm.The compact model does not take up much space and will allow you to neatly and orderly arrange all the items and wardrobe elements.

For small rooms, designers offer models with a width of 110 cm. Such a wardrobe is divided into two parts inside, and usually has two doors. The most compact is the 80 cm wide wardrobe. It takes up very little space, so it can be placed in a small hallway or on a balcony.

The minimum width can be one meter, then the cabinet has only two doors. Narrow doors are characterized by instability, which will lead to the facades falling out of the lower guides, so they must be at least 45 cm wide.If the cabinet dimensions do not allow using such parameters, then you will have to abandon the sliding system and use hinged doors.

The maximum cabinet height can be no more than 278 cm, since this is the size of the chipboard plate. If it is necessary to create a wide model, then the cabinet is assembled from two modules, between which a partition is placed.

To correctly calculate the number of doors, you should measure the opening. The door is less than the height of the opening by only 4 cm. But the width of the door depends on their number. Remember that the doors are positioned in such a way as to slightly overlap each other. Given this fact, you should add 2 cm for each overlap.

For example, if you decide to use only two doors, then their width is calculated as follows: the width of the cabinet opening plus 2 cm and divide by two. If you use three doors, then the calculation will look like this: the width of the opening plus 2 cm and divide by three.

The door rails can have a maximum size of 5 m... They are made from aluminum. This width allows the use of 4 to 7 doors. To prevent the doors from being too heavy, their width should not exceed one meter.

A sliding wardrobe usually contains rods, shelves and drawers. The number of vertical sections can be individually adjusted. They can be of various widths. The standard choice is with a separate compartment behind each door.

It is very important to take into account the thickness of the material, as it plays an important role in calculating the filling of the cabinet. Chipboard can have a thickness of 16 to 18 mm. If you create several partitions, then the product immediately loses about 5 cm. The so-called "dead" zones inside may appear if the furniture consists of two or three doors. In such places, the use of retractable mechanisms should be avoided.

When calculating the filling depth, it is very important to take into account the size of the mechanism for doors, as well as hinges and handles. For example, if the cabinet has a standard depth of 60 cm, then only 45 cm guide is suitable for the drawer, since the front hinge and handle are also used.

The bar must be at least 55 cm long. The height of its location can be different. It depends on the height of family members, so it can vary from 1.5 to 1.8 m. With the help of a pantograph, the bar can be raised to a greater height.

Often there is a chest of drawers inside the wardrobe. It should be no more than one meter high. Its depth depends on the overall depth, and remember to subtract the width of the handle. Usually 25 cm is left for a standard drawer handle. The cut-in handles can be used to increase the depth of the drawers as they do not protrude beyond the bezel.

The correct location directly affects the usability. It is recommended to maintain a distance between the shelves of 25 to 35 cm. However, you can deviate from these dimensions in order to achieve the best result. For example, for the convenient use of deep shelves, the distance between them should be more than 35 cm.

Although many prefer the presence of several small "stripes" than one roomy one. In this case, it will be much easier to arrange things, you will always know what and where is.

When choosing a wardrobe, it is very important to pay attention to what materials this furniture is made from, as well as its appearance... The durability and strength of the product depends on the choice of raw materials. Many models are made of chipboard and MDF.

The innovative technologies used in the manufacture of these materials are the guarantor of excellent quality. Furniture is not afraid of moisture and mechanical damage, and also perfectly withstands temperature changes.

Today, many manufacturers of cabinet furniture offer original solutions that simply cannot be ignored. Sliding wardrobes with photo printing and sandblasting patterns are very popular. The choice of facades is so diverse that each customer will be able to choose the ideal option depending on personal preferences.

The above parameters are very important when choosing a wardrobe, but you should also pay due attention to the internal content of the model and its dimensions.

When choosing a model for clothes, one should seriously approach the choice of inner filling. It can include rods, shelves, drawers, nets. Depending on what kind of clothes will be in it, the internal equipment is already selected.

It is worth choosing a wardrobe in the hallway, which is characterized by functionality and practicality, as well as a beautiful design. The wardrobe in the hallway is used not only for storing things, it can also be used as a mirror, a drawing board, in the form of an open rack. You can arrange it to your liking.

First you need to choose the location of the furniture.

Use a tape measure to measure the dimensions of the room.It is better to measure the room in several places, since perfectly flat walls and corners are extremely rare.

It is worth considering the location of the windows, door frame, switches and batteries. Don't forget about baguettes and skirting boards. Therefore, on average, about 5 to 10 cm should be subtracted from the total size of the room.

You also need to subtract 5 cm on each side due to the unevenness of the walls. If the cabinet is located behind a doorway, then it is imperative to take into account the location of the door handle. It is necessary to choose the correct width of the product so that the handle does not touch the cabinet door.

It is strictly forbidden to place the cabinet near the electrical wiring. When calculating the depth of the product, be sure to retreat 5 cm from the switch, doorway.

After making all the above calculations, you can correctly determine the dimensions of the product. You need to calculate the depth, height and width of the cabinet, as well as the dimensions of the lid, bottom and plinth. It is imperative to decide how many doors there will be and their width.

In order to correctly organize the internal filling of the wardrobe, you should decide what things and items will be stored there. But there are generally accepted rules to follow:

• The shelves should be 10-15 cm less in depth than the cabinet itself. Since this distance is occupied by the mechanism of the sliding system of facades.
• The width of the shelf inside can be from 0.4 to 1 m.
• The height between the shelves should be approximately 30 to 36 cm.
• The hanger bar has a length of 0.8 to 1 m. If the cabinet includes two pipes, then they must be located at a distance of 0.8 m from each other.
• Drawers should be 0.4 to 0.8 m wide and 10 to 30 cm high.

A variety of models allows you to choose the ideal option for arranging your home, so that it harmoniously fits into the interior of the room. Models with mirrored facades look beautiful and impressive. Mirrors visually make the room more spacious.

Cabinets with photo printing will help to add romance and originality to the interior. Amazing flowers on the facades will add tenderness, style and originality to the interior.

The most daring ideas can be embodied in the cabinet design. Feel free to experiment with color schemes. You can also emphasize the contrast in colors with different geometric shapes.