Metal siding under the tree: the advantages and benefits of the material

Metal siding under the tree: the advantages and benefits of the material
  1. Advantages of wood-effect metal panels
  2. Negative qualities
  3. Difference from analogues
  4. Design
  5. Content of various substances
  6. Preparing walls for panel installation
  7. Panel mounting
  8. Completion of the siding installation

Now many are faced with a choice of which material to use for the exterior of the house. Modern manufacturers present a huge assortment of various building materials. They differ from each other in various technical characteristics, for example, a metal profile or a block house. In this huge variety, the main thing is to choose high-quality material that is strong, durable and, importantly, at an affordable price. This last factor plays an important role in the choice.

Siding belongs to such inexpensive and high-quality building materials. In recent years, this finishing material has gained wide popularity among buyers, which is quite justified, since siding has many positive qualities.

Advantages of wood-effect metal panels

Manufacturers offer a huge range of siding from various materials: metal, wood, PVC. Among the wide variety, you can choose the right material in terms of colors, properties, quality. Recently, the popularity of metal siding in the form of wood imitation has been growing.

The advantages of metal panels have long been appreciated by numerous buyers., in spite of the fact that the siding has a rather large weight and is installed on a reinforced crate.

The many positive qualities of metal panels far outweigh the disadvantages.

The advantages of metal panels can be enumerated for a long time:

  • the service life of the material is about fifty years;
  • quick and easy installation of the coating;
  • the siding coating is quite easy to care for;
  • the finish does not lose its quality at very low and high temperatures: the temperature range is from minus eighty degrees Celsius to plus sixty degrees.
  • metal siding has an excellent property that is highly appreciated by buyers - strength;
  • metal panel trim retains its original color for a long time;
  • siding coating practically does not expand when exposed to heat;
  • siding is not affected by mold and fungi;
  • it has an excellent property - fire safety;
  • a large selection of panels in various shades;

To the advantages of wood-like metal panel finishes, you also need to add a wonderful appearance of the coating. This material has mostly only positive reviews.

Negative qualities

In the presence of a huge number of positive qualities of the material, it is imperative to take into account the disadvantages.

  • Metal panels differ in cost. The financial cost of covering from metal siding is slightly higher than from other types of panels.
  • In hot sunny weather, the coating tends to get very hot, due to which the temperature in the room rises.
  • During installation, it is recommended to install the coating on some types of insulation, since the panels are characterized by high thermal conductivity.
  • Large weight of the product.
  • Under mechanical stress, deflections and dents appear on the panels. In the future, the appearance of the siding cannot be restored, so you have to change the entire panel.

Therefore, when installing the coating, it is necessary to handle the material as carefully as possible.

Difference from analogues

Wood is an excellent natural material and it has many positive properties, but there are also disadvantages of this material. Wooden surfaces require special attention and special care. This material is susceptible to high humidity, mildew and mildew. Not everyone can afford the significant costs of processing wooden coatings. Therefore, as a rule, they are looking for a strong, durable and less costly replacement.

Metal siding has several varieties: imitation of a bar, stone, log, wood, brick and ship board. Very often, the exterior decoration of houses is made of concrete, brick, wood-like panels. This coating gives the appearance of the dwelling uniqueness and beauty.

The cover does not lose its original appearance. Metal siding is characterized by increased resistance to natural influences: sunlight, precipitation, temperature extremes, and so on. The metal panels are fire resistant.

Design

Metal siding is a panel of metal, their length varies from two to six meters, a width of twenty centimeters, a thickness of about one millimeter. Wood-like metal siding is a curved hemisphere resembling a tree, consisting of several layers.

Galvanized steel, treated with special anti-corrosion agents. This is followed by a layer of primer and a polymer layer completes this construction. Almost all manufacturers produce panels with additional equipment for easy installation of the coating. Each panel is equipped with special fasteners, which greatly simplify the siding installation process.

All manufacturers additionally offer detailed installation instructions for the panels.

Content of various substances

Decorative panels have excellent technical characteristics. Unlike wood, metal siding is easy to care for, the panels are resistant to fungus and mold, to various atmospheric precipitation. Excellent performance is entirely dependent on impurities. Metal siding contains a huge amount of zinc, which significantly increases the corrosion resistance of the coating. The cover made of metal panels is durable. And for many years it retains its original appearance.

Metal siding has a huge variety of shades, the coating of decorative panels visually practically does not differ from natural wood.

Preparing walls for panel installation

Preparation of the wall surface before installing siding coverings is a very important and crucial moment. The appearance of the finish, the service life depends on this.

It is necessary to prepare the walls carefully and observing all the slightest requirements.

  • Wooden walls must be carefully treated with special antiseptic agents.
  • Stone, concrete, brick and plaster surfaces should be carefully and thoroughly cleaned, all cracks and crevices should be repaired.
  • Before starting finishing work, you need to remove the platbands from the windows, gutters and other elements.
  • In some cases, the installation of panel coverings is carried out simultaneously with thermal insulation. In this case, the thermal insulation should be installed up to the lathing. The installation of the battens is carried out on carefully laid heat-insulating materials, in compliance with the necessary conditions for this technological process. Now you can start installing the coating. It should be borne in mind that the distance between the thermal insulation and the panels should be about three centimeters, this is necessary for ventilation.
  • The lathing should be fixed to the wall surface using metal hangers or brackets. The surface of the wall must be perfectly flat, otherwise even the slightest distortions will be noticeable after finishing.
  • The distance between the battens should correspond to the dimensions of the siding.

Finishing with decorative panels completely depends on the quality of work on the preparation of the surface of the walls.

Panel mounting

You can install decorative panels yourself. The process will not cause significant difficulties.

There are certain rules to remember and follow.

  • In the process of installing siding, along with the main panels, you need to install additional elements. After completing the installation of the coating, it is almost impossible to install additional elements.
  • The panels on the wall surface are fixed with nails, but only if the lathing is made of wooden materials. Otherwise, it is better to use self-tapping screws.
  • Installation of siding can be carried out both vertically and horizontally. More often the panels are installed horizontally to the ground. In this case, the installation must be started from the bottom. Particular attention should be paid to the lowest row, it should be located strictly horizontally.
  • We begin to screw on long elements from the middle of the product, and move to the edges.
  • You should not drive the nail into the panel at an angle, it should go straight straight.
  • In the process, it is necessary to ensure that the nails are not driven in to the end. The siding should adhere freely to the wall surface.
  • To avoid deformation and distortions during significant temperature changes, you need to leave a small distance between the rows and individual panels.

Before purchasing siding, you should carefully calculate the required amount of material. Since if it becomes necessary to buy the missing number of panels, there is a possibility of buying panels of the wrong shade. The difference in color will be noticeable as it is impossible to achieve the same shade. This is a very important point, so it is better to purchase a little more panels than required.

Completion of the siding installation

The final stage of finishing work can be considered the installation of slopes, gutters, and so on. These works only seem insignificant. In fact, they play an important role. These details are not only elements of the building's decor, they protect the heat-insulating material from the effects of atmospheric precipitation. The consequences can be extremely unpleasant. Deformation of the lathing, thermal insulation material loses its technical characteristics, this will entail the replacement of siding.

Metal siding is an excellent finishing material. The technical characteristics of decorative panels have made this building material popular with a large number of buyers. Remarkable aesthetic appearance and affordable price of the coating play a significant role in the choice of this building material.

All financial costs will be justified by the long service life of the finishing, since the renovation of the building will not be required for a very long time. Metal siding does not lose its color over the years, despite exposure to moisture, sunlight and temperature extremes. The building, covered with metal panels, looks stylish, original and beautiful.

A simple and easy process of installing decorative panels is quite within the power to do it yourself absolutely every person. This will also significantly reduce the financial costs of finishing the building.

Metal siding is a popular, modern, durable and high quality, inexpensive finishing material; anyone can purchase it.

For information on how to mount metal siding under a tree, see this video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture