How to connect printer to laptop via USB cable?

Content
  1. Printer connection
  2. Installing and configuring drivers
  3. How do I set up printing?
  4. Possible problems

It can be really problematic to connect complex office equipment, especially for beginners who have just bought a peripheral device and do not have sufficient knowledge and practice. The issue is complicated by the large number of printer models and the presence of different operating systems of the Windows family, as well as Mac OS. To set up the operation of the printing device, you should carefully read the instructions and follow the useful recommendations.

Printer connection

For advanced users, this work takes 3-5 minutes. Beginners should carefully study the manual supplied with office equipment in order to avoid embarrassing situations in the question of how to connect the printer to a laptop via a USB cable and perform pairing at the software environment level. The whole process can be divided into three main stages:

  1. connection through a special wire;
  2. driver installation;
  3. setting up the print queue.

    The first step is to plug the cord into the network and only then follow the next steps.

    Place the printer and computer nearby so that both devices can be connected without problems. Place the PC in such a way that access to the rear ports is open. Take the supplied USB cable and connect one end to the printer, and plug the other into a socket on the computer. There are times when pairing via a wire is impossible due to busy ports. In this case, you need to purchase a USB hub.

    When both devices are ready for use, you need to turn on the power button on the printer. The PC must independently determine the new connection and find office equipment. And also he will offer to install the software. If not, you must manually configure the system settings to pair the two devices.

    If it was possible to connect office equipment to a computer or laptop not with a new, but with an old wire, it is highly likely that it is damaged. Therefore, it is better to start work with a USB cable when it is known in advance that the cable is suitable for use. Further steps:

    • open the control panel;
    • find the line "Devices and Printers";
    • activate;
    • if the printer is in the list of devices, you need to install the driver;
    • when the machine is not found, select "Add Printer" and follow the instructions of the "Wizard".

    In some situations, the computer still does not see office equipment. In this case, you need to re-check the connection, the cord is working, restart the PC, reconnect the printing device.

    In general, it is possible to connect a printer to a computer or laptop not only using a special cord. It can be done:

    • via USB cable;
    • via Wi-Fi connection;
    • wirelessly using Bluetooth.

    If the wire is unusable or lost, there is always the opportunity to choose alternative methods.

    Installing and configuring drivers

    For office equipment to work, you will have to install software into the operating system. If the optical media with the driver is present in the box with the printer, this simplifies the setup process. The disc must be inserted into the drive and wait for autorun. If nothing happens, you need to run the executable file manually.

    To do this, you need to open "My Computer" and double-click on the optical drive icon. A menu will open where you need to find a file with the designation Setup exe, Autorun exe or Install exe. Open it with the right mouse button - select the "Install" line and follow the further instructions of the "Wizard". Installation time is 1-2 minutes.

    Some printer models do not come with the required driver CDs, and users have to search for the software themselves. This can be done in one of several ways.

    • Use a special application. The most famous and free is Driver Booster. The program will independently find the required driver, download and install.
    • Search manually. There are two options here. Enter the name of the printer in the address bar, go to the manufacturer's website and download the software in the appropriate section. And you can also download it through the "Device Manager" panel, but this is in the event that Windows detects the printing device.
    • Update the system. Go to Control Panel, go to Windows Update and run Check for Updates.

    The latter method may work if a popular printer is installed. In all other cases, it is advisable to try the methods described above.

    If the downloaded software is fully compatible with the operating system and peripheral device, the installation process will be shown in the lower left corner after starting the driver. When finished, the laptop needs to be restarted. You don't have to take any further steps.

    How do I set up printing?

    This is one of the last points for the initial setup of the printer, and you need to resort to the final stage only when you are confident that the peripheral device is correctly connected, and the necessary drivers are loaded into the system.

    To change the "Default" parameters in the printing machine, open the "Control Panel", "Devices and Printers", select the name of the office equipment and click on the "Printing Preferences" button. This will open a dialog box with a large list of functions, where you can adjust each option.

    For example, a user can change or select before printing a document:

    • paper size;
    • number of copies;
    • saving toner, ink;
    • range of pages;
    • selection of even, odd pages;
    • print to file and more.

    Thanks to flexible settings, the printer can be configured to suit your own priorities.

    Possible problems

    When connecting a peripheral device to a computer or laptop, problems can arise not only for inexperienced users.

    Difficulties are often faced by staffing office employees who have worked with the printer for more than one year.

    Therefore, it makes sense to identify several difficult situations and talk about solutions.

    1. The computer or laptop does not see the office equipment. Here you need to check the USB cable connection. If possible, use a different wire known to be serviceable. Connect it to another port of the PC.
    2. The laptop does not recognize the peripheral. The main problem most likely lies in the lack of a driver. You need to install the software and restart your computer.
    3. The printer does not connect. Check if the correct cord is selected. This often happens when the printing device is purchased from hands.
    4. The laptop does not recognize the printer. The forced method will help here when you need to use the help of the "Connection Wizard". You need to go to the "Control Panel", select "Devices and Printers", click on the "Add a device" tab. The computer will find the device on its own.

      If the recommendations described above did not help, you will have to contact the service center.

      Each user can connect the printer to a computer, laptop without any assistance. The main thing is to carefully read the instructions supplied with the printing device. And also know what operating system is installed on the PC.It will not be superfluous to prepare in advance a USB cable, an optical drive with a driver, or a ready-made software package downloaded from the official website.

      When everything is ready, the process of pairing the printer with your computer should be straightforward.

      How to connect the printer to a laptop with a USB cable, see below.

      no comments

      The comment was sent successfully.

      Kitchen

      Bedroom

      Furniture