How do I tune the radio on my speaker?

Content
  1. Turning on
  2. Customization
  3. Possible malfunctions
  4. Troubleshooting

Few people know that using a portable speaker is not limited to listening to a playlist. Some models are equipped with an FM receiver so you can listen to local radio stations. The tuning of FM stations in portable models is practically the same. Some tips on how to enable, configure, and troubleshoot possible problems can be found in this article.

Turning on

Some speakers are already equipped with an antenna for FM radio. This model is the JBL Tuner FM. Turning on the radio on such a device is as simple as possible. The column has the same settings as a conventional radio receiver.

In order to turn on the FM receiver on this portable device, you must first fix the antenna in an upright position.

Then press the Play button. The search for radio stations will then start. It is worth noting that the device has a display and a simple control panel, which greatly facilitates radio tuning. And also there are 5 keys for managing and saving your favorite radio channels.

The rest of the models do not have an external antenna and are unable to pick up radio signals.

But many users buy analogs of devices of well-known brands, in which it is possible to listen to the radio. In this case, to turn on the FM radio, you need a USB cable that will receive the radio signal. The USB cable must be inserted into the mini jack 3.5. You can also use headphones to receive the signal..

Customization

After connecting the wire, you need to set up the radio on the speaker. Tuning FM frequencies should be considered on the example of the Chinese speaker JBL Xtreme. The device is equipped with Bluetooth. This type of wireless connection plays a major role in setting up radio channels.

The earphone or USB cable is already connected, then press the Bluetooth button twice. This should be done at intervals of a few seconds.... When pressed for the first time, the unit will switch to Wired Playback mode. Pressing a second time will turn on FM radio mode.

The column has a JBL Connect button. The button is located next to the Bluetooth key. The JBL Connect key has a pair of triangles.

It is worth noting that on many Bluetooth models this button may have three triangles. To start searching for radio channels, click on this button. It will take a little time for the speaker to start picking up the signal of radio stations.

To automatically start tuning and save channels, press the Play / Pause key... Pressing the button again will stop the search. Switching radio stations is carried out by short pressing the buttons "+" and "-". A long press will change the sound volume.

Bluetooth speaker without antenna can also be used to listen to radio via phone or tablet... To do this, you need to activate Bluetooth on your phone or tablet, go to "Settings" or "Options" and open the Bluetooth section. Then you need to start the wireless connection by moving the slider to the right. The phone displays a list of available devices. From this list, you must select the name of the desired device. Within a few seconds, the phone will connect to the speaker. Depending on the model, the connection to the phone will be notified by a characteristic sound from the speaker or by a color change.

Listening to the radio from the phone through the speaker is possible in several ways:

  • through the application;
  • via the website.

To listen to the radio using the first method, you must first download the "FM Radio" application.

After downloading, you should open the application and start your favorite radio station. The sound will be played through the music speaker.

In order to listen to the radio through the site, you need to find the page with radio stations through the browser on your phone.

This is followed by a similar setting for listening: select your favorite radio channel and turn on Play.

Since almost all portable speakers have a 3.5 jack, they can be connected to the phone via an AUX cable and thus enjoy listening to FM stations.

In order to connect the speaker to the phone via the AUX cable, you need to do the following:

  • turn on the column;
  • Insert one end of the cable into the headphone jack on the speaker;
  • the other end is inserted into the jack on the phone;
  • an icon or an inscription should appear on the phone screen that the connector is connected.

You can then listen to FM stations through the app or website.

Possible malfunctions

Before you start turning on the column, you should make sure that the device is charged. Otherwise, the device simply won't work.

If your device is charged, but you cannot turn on the FM radio, you should check if Bluetooth is turned on. Without Bluetooth, the speaker will not be able to play sound.

If you still failed to tune the radio on the Bluetooth speaker, this can be explained by additional reasons:

  • weak reception signal;
  • lack of support for FM-signal;
  • malfunction of the USB cable or headphones;
  • defective production.

The occurrence of problems may also affect listening to FM channels through the phone. Crashes can occur with wireless connections.

Troubleshooting

In order to check for the presence of a radio signal, first you need to make sure that the device supports the FM receiver function. It is necessary to open the instruction manual for the device. As a rule, the presence of the receiver is described in the characteristics.

If the speaker has a radio function, but the antenna does not pick up the signal, then there may be a problem in the room... Walls can jam radio reception and create unnecessary noise. For a better signal, place the device closer to the window.

Using a faulty USB cable as an antenna can also cause problems with the FM radio.... Various kinks and kinks on the cord may interfere with signal reception.

The most commonplace reason is considered to be a production defect.... This is especially common in the cheapest Chinese models. In this case, you need to find the nearest customer service center of the manufacturer. In order to avoid such cases, it is necessary to choose a quality audio device from a trusted brand. When buying in a store, you should immediately check the speaker to avoid unpleasant surprises when connecting at home.

If there is a problem with connecting a Bluetooth speaker to the phone, then you need to make sure that Bluetooth mode is activated on both devices.

Some speaker models have a weak wireless signal. Therefore, when connecting via Bluetooth, place both devices as close as possible to each other. If the column still does not work, then you can reset its settings. Resetting the settings is carried out by pressing several keys. Combinations may vary depending on the model. It is necessary to look at the instructions for the device.

Sound loss may occur when the speaker is connected to the phone... To fix the problem, you need to go to the phone menu and open the Bluetooth settings. Then you need to click on the name of the connected device and select "Forget this device". After that, you need to restart the search for devices and connect to the speaker.

Portable music speakers have become an indispensable device for listening to more than just music. Many models have support for FM stations.But some users face problems with radio signal settings. These recommendations will help you understand the connection, search for radio stations, and also fix minor problems with the device.

How to tune the radio on the speaker - more in the video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture