Meizu headphones: characteristics and model overview

Meizu headphones, wired and wireless, are popular with connoisseurs of quality sound. They are well compatible with popular smartphones. An overview of Flow and other new models allows you to fully understand the characteristics of such devices. But before getting fashionable headphones, you should study the information on how to properly set up and connect them, as well as study all the technical features and recommendations of the manufacturer.

Meizu headphones are produced by the Chinese corporation Meizu Technology Co., Ltd, which has been successfully holding a high status in the electronics market for more than 15 years. The brand develops its accessories for smartphones and players taking into account the opinions of true connoisseurs of high-quality sound. These are headphones for advanced users - active townspeople riding a scooter or public transport who regularly visit the gym.

Meizu is committed to principles of quality progress. Much attention is paid not to the speed of products entering the market, but to their improvement, bringing them to perfection. Everything from the design to the ergonomics of the accessories is carefully thought out. The distinctive features of Meizu headphones include:

• the use of high-tech materials;
• the lowest possible weight in each class;
• availability of models for different tasks;
• intuitive control;
• high purity of sound;
• tangle-free wires;
• extensive equipment;
• versatility, high compatibility with smartphones;
• high charging speed.

The current lineup of Meizu headphones includes models POP, Flow, EP2X, EP52, HD50. The manufacturer creates both wired and wireless devices that support Bluetooth technology. Design excellence does not negate the functionality of typefaces. Each of them successfully solves the assigned tasks, providing clear and accurate sound reproduction. The entire lineup is worth considering in more detail.

Wireless sports headset with flexible silicone wire sheath. In the manufacture of this model, the latest materials were used, which made it possible to make the headphones practically weightless. Together they barely reach 6 g. The diaphragm is made of biocellulose - a material that transmits sound vibrations well; the body itself has a special shape that enhances its acoustic properties. The earbuds are easily attached to each other using magnets built into their structure.

The Hall effect sensor will turn off the headset after 5 minutes of inactivity. Wireless Meizu EP52 is equipped with an energy-intensive battery that can play music for up to 8 hours in a row without interruption. The battery can be fully charged in 2 hours.

Wired stereo headphones with volumetric soft ear cushions and stylish metal body. Hi-Fi headset is equipped with aluminum holders and the outer part of the earcups, the headband is soft, made of artificial leather. The model is available in only 2 colors: black and white. The cups are foldable, movable, fixed along 3 axes for maximum convenience.

Meizu HD50 has a great design. Sleek and stylish, these roughened headphones have large, closed ear cups for superior noise-free sound transmission. The membranes inside are made of microbiological fiber with the highest possible resolution. Regardless of the genre, the music is revealed as much as possible while playing.

The manufacturer positions the HD50 headphones as the most reliable. They can easily withstand up to 12 falls from a height of human growth without consequences. The power button is designed for 100,000 clicks, the cable can be bent in any direction without fear. These headphones will easily withstand the most intense use. Inside the flexible connecting cable there is a multilayer structure made of copper in the core and stranded wires, Kevlar.

Meizu introduced the wireless stereo headphone model after Apple released the highly successful AirPods. Pop - an accessory for lovers of sports, physical activity. Compact headphones have a vacuum type design, waterproof housing. The model comes with a special compact case for storage and charging. Its front panel has LED indicators, the back of the case is equipped with an activation button.

The shape of the Meizu Pop is cylindrical, with an LED indicator running along the outer edge. Inside this circle is a sensory area with which you can control the playback of music. On the left earpiece, pressing and holding this area can decrease the volume, on the right earpiece, increase it.

The model works using the Bluetooth 4.2 protocol, there is an SBC codec and an amplifier. The sound is generally clear, the best quality is reproduced in the middle frequencies... When using the microphone function, the voice is transmitted clearly, the interlocutor is also well heard. When fully charged, the earbuds work for 3 hours without interruption, a full case is enough for 4 wireless recharges.

Meizu POP has version 2 released in 2019, with Bluetooth 5.0 and improved noise cancellation. The battery life has also been extended - the new battery can withstand up to 8 hours without recharging. The headphones have won many fans due to their compactness, low weight - only 11.6 g and 11 in POP 2, stylish design.

Three-driver Hi-Res headphones, which the brand positions as the best in its class. This is a new corded model, complete with 5 pairs of interchangeable ear pads, an adapter for use in air travel, a charger and a silicone case-pocket. The model is available in black and silver body colors. The Meizu Flow headphones have the following set of characteristics:

• impedance 52 Ohm;
• 3.5 mm jack;
• power 6 mW;
• frequency range from 10 to 30,000 Hz;
• sensitivity up to 100 dB (42 dB microphone);
• weight 22.7 g;
• cable 1.18 m long.

3 emitters inside the case are responsible for different frequency ranges - low, medium, high. The manufacturer promises pure sound in any of them. In practice, high-frequency sounds are most strongly audible; bass lovers will clearly lack sound depth. The headphones are equipped with a three-button remote control.

Stylish, versatile wired headphones Meizu EP2X managed to get a lot of positive reviews due to optimal ergonomics, low weight, the use of neodymium magnets for fixing and ear pads that hold in place even when running. Dynamic headphones have a standard operating range of 20-20000 Hz, a microphone is provided in the design, and there is a remote control unit. The manufacturer claims good sound quality for this model. Both mids and highs or bass are clear. This is a good choice for connoisseurs of classic wired headsets for talking and listening to music on the phone.

You also need to be able to properly connect wireless headphones. You can consider the process of connecting them to the phone using the example of one of the most relevant models - Meizu Pop. For successful pairing, you need a smartphone with a Bluetooth module, since the connection will be carried out precisely through this method of wireless communication. Before starting to use a pair of headphones, it is recommended to fully charge them - for this they are placed in a case, and a charger cable is connected to its port. If you do everything correctly, the blue LED on the case will start blinking, as soon as it goes out, the battery is ready for use - it will last for 8 hours of operation.

The procedure for connecting Meizu headphones to a smartphone is extremely simple. To set up pairing, you need the following.

1. Turn on the headphones... The necessary button on the body is located between the keys, which can be used to increase the volume of the sound. Separate models with independent control are activated separately. It takes 10-15 seconds to synchronize them with each other. When a pair is successfully found, the indicators will flash blue and red.
2. Turn on Bluetooth on your smartphone... This is done from the quick menu or in the wireless settings of the machine.
3. Open a list of devices available for connection on the smartphone. Turn on visibility for all Bluetooth modules within range. Wait for the Meizu line to appear.
4. Select a new item. Confirm pairing. The headphones must beep. The smartphone displays information about the connected headset. You can play music tracks and listen to them through headphones.

The right earphone fits into the case for this. The LED should stop flashing. Then you need to make 5 short clicks on the power button. If everything is done correctly, the device will respond with 4 indicator beeps, the procedure is the same for the left earphone.

See an overview of one of the models below.