Metal bunk beds

Beds with two tiers are a practical solution for children's rooms, country houses, small hotels, hostels. Metal bunk beds take up little space; if necessary, they can be easily disassembled and transported. In addition, this is an original design solution that can "revive" a boring interior.

The design of bunk beds is based on two berths located one above the other. This allows you to significantly save space, which is especially important for narrow elongated rooms. Often, models are purchased for children's rooms, boarding schools, camps, but they are also suitable for adults. Such products will be indispensable at dachas where many relatives and friends gather. Bunk beds are also purchased for chains of small hotels and budget sanatoriums.

Distinctive features of metal beds with two tiers:

• Compactness. The models take up little space, making them suitable for all sizes of rooms. In addition, you can order a custom-sized bed - for a specific room.
• Profitable price. The purchase of such furniture will take about half as much money as the purchase of two beds. For people who are limited in finances, manufacturers offer budget models with a minimum of decor.
• Long service life. Metal beds have been in use for years (and even decades) as they are nearly impossible to break. At the same time, the products retain their aesthetic characteristics.
• Strength and wear resistance. The bed frame is resistant to external mechanical stress, it can withstand heavy loads.
• Fire safety. Such models are not afraid of fire, so they can be operated at high temperatures.
• Ease of installation. Collecting beds does not require professional knowledge and the use of special tools, so even a beginner can install them.
• Hygiene. The metal frame is resistant to harmful microorganisms and does not emit harmful substances into the atmosphere.

Previously, metal beds were heavy, but now they use hollow pipes and small parts to make them. In a disassembled state, such products are easy to transport, and when finished, they can be moved from place to place. The bed may contain additional shelves, drawers, a built-in table, which makes the model more functional.

These models have many advantages, but they also have a number of disadvantages. Due to the technically complex metalworking procedure, beds are produced in a relatively limited number of shapes. However, this is enough for the selection of suitable furniture. In addition, the base can always be supplemented with panels and elements from other materials.

The metal has good thermal conductivity, so it will invariably heat up on a sunny day. Rust predisposition requires special care of the frame. It is recommended to periodically treat it with special anti-corrosion agents.

The external and design features of bunk beds vary from manufacturer to manufacturer. The adult and children's models differ from each other in size, the presence of handrails and protective elements.For small family members, it is also recommended to choose additional reinforced stairs.

Price is another basic criterion by which beds differ. In the collections of brands, you can find economy class products, but you should not chase too cheap furniture: the quality and convenience of products depends on this.

Common types of bunk beds:

• With boxes. A practical option that will save space. Drawers are located under the first tier of the bed. They are suitable for storing bed linen, unnecessary or seasonal items. Miniature shelves welded from the sides will also be appropriate. There are books, decorative elements, frames with photographs, lamps.

• Iron folding for two beds. An unusual model, which is used both as a bunk bed and as two separate beds. Suitable when furniture is periodically transported from a large room to a narrower one. In addition, this solution will allow you to increase the number of beds only as needed - for example, when friends and relatives arrive. Such models are characterized by ease of installation.

• With a ladder made of metal. Most of the models on the furniture market. A more comfortable option than beds without stairs. For convenience, they are equipped with handrails and protective elements. There are models with wide steps or made according to the type of ladders. The latter are not very convenient to use, but they are compact and reduce the overall weight of the structure.

• With a reinforced frame.High strength furniture. This frame has a thicker base and is made from the most durable metals. It is resistant to strong mechanical shock and is durable. The model is suitable for overweight people and couples, if one of the berths is designed for two people.

• Combined. In the basis of the design of the model, manufacturers have combined several materials. The final version looks original, suitable for modern interiors, modern style bedrooms. The metal frame is combined with wood, chipboard panels, plastic elements, which are used to decorate the sides and backdrop.

The selection of dimensions depends on the personal preferences of a particular person. Manufacturers offer beds in a standard size range. The width of the products ranges from 70-90 cm for single models and about 140-160 cm for double models.

The length of the bed, as a rule, is 190-205 cm, and the average height of the second tier reaches 1760 mm and depends on the height of the ceilings in the apartment. In addition, when making products to order, these characteristics can vary depending on the wishes of the client, including when an unusual design project is being implemented.

Furniture factories that manufacture metal bunk beds can be roughly divided into three groups. The best are European manufacturers who use only high-quality materials and the best alloys.

Companies regularly introduce innovative technologies and strictly control the production process. Chinese products are cheap, but their service life is several times lower. It also happens that foreign brands open factories in Asia and produce furniture there using their technologies.

Domestic manufacturers and companies from the CIS countries are a separate block. They can both create original products and buy the rights to use their design projects from European colleagues. In Russian collections, you can find both expensive furniture and quite budget products for summer cottages and country houses.

Let's take a closer look at well-known furniture brands.

A well-known manufacturer that creates beds of different heights and sizes, designed for children and adults.The models are equipped with bumpers and handrails, thanks to which it is impossible to fall from the berth, even deliberately. However, experts recommend purchasing furniture from this factory only for children over 6 years old.

Famous models of the brand include "Sverta" and "Tromso". The first is intended for younger schoolchildren and has a low cost. The ladder is angled, making it easier to climb up to the second tier. The height to the bottom is about 145 cm. Another version of this model is equipped with double beds and is located below; you can sit on the first tier, but you won't be able to get up there.

"Tromso" has large dimensions, therefore, a person located on the ground floor can sit freely and take an upright position. All products are made from steel and are powder coated with epoxy resin for increased wear resistance and high durability. Use a damp cloth and mild detergent to clean these models.

A domestic brand that creates budget products for a wide variety of consumers. Among the clients of the company are hospitals, boarding schools, children's camps, sanatoriums, tourist centers. In addition, such furniture is purchased for builders, workers and repair teams. Blankets, pillows and mattresses can be purchased with the beds. The advantages of the products are strength, reliability, ease of assembly.

A popular Malaysian brand, whose collections include collapsible models and transformers. It targets children directly and creates compact beds suitable for the smallest rooms. On the second floor, there are protective railings that prevent the child from falling. The company pays attention to detail, which is why the beds are unique in design and allow you to bring unique interior projects to life.

Instead of the bottom, there is a metal mesh on which you can place any mattress, including an orthopedic one. Another distinctive feature of the collections is that different materials are actively combined in the production of furniture. The manufacturer actively uses the array of hevea.

A comfortable bed is a guarantee of good rest during sleep, so you should take it seriously. Models differ from each other in size, design, design and workmanship, therefore it is recommended to compare furniture from different manufacturers in the right price segment before making a purchase.

So, what is considered when buying a bunk bed:

• Dimensions. The size of the furniture is correlated with the number of people, their complexion and the available free space in the room.
• Material... For the manufacture of the bed, steel is taken, as well as aluminum and other types of metals, wood and plastic panels are additionally used. The first option is more affordable, the second has better anti-corrosion properties.
• Coating. It can be polymeric or powder. It is better to give preference to beds, the metal base of which is treated with special protective agents that prevent the occurrence of corrosion and fungus.
• Durability of the structure. The joints should be as strong as possible, otherwise the components of the bed will not hold, and it will quickly deform. Usually they check how well the joints are welded.
• Protective elements. The sides will not let fall from the upper tier, this is especially important when purchasing furniture for children and adolescents.
• Design. The appearance of the beds depends on the presence of decorative elements and the peculiarities of their combination. There are both minimalistic models and futuristic ones, decorated with many details. In addition, the aesthetic characteristics are directly related to the interior of the bedroom.

When buying, take into account the complete set of the model, the presence of additional built-in elements.Mostly they are present in wooden beds, however, small shelves can also be welded to metal ones. If space permits, a small table is placed on the side; if necessary, lights and bedside lamps are placed on each of the tiers.

To prolong the life of the beds, they should be cared for. Dust and dirt inevitably accumulate on the frame, so metal parts must be regularly wiped with a soft cloth. Wet cleaning is recommended once a month using Sanita, Comet, Adrilan, Cillit cleaning products. They are used both for prophylaxis and for removing rust that has already appeared. Aluminum parts are cleaned with soapy water and a soft sponge.

If the furniture is made of metals without anti-corrosion coating, it should not be installed in rooms with high humidity. In addition, the parts are periodically covered with protective solutions. Polishing allows you to get rid of minor scratches and other external defects. Rusted elements are cleaned, primed and re-painted or varnished.

When thinking about bunk beds, associations often arise with monotonous models, which are based on a thin metal frame. Such furniture is often bought for dorms and low-cost hostels, guided by a limited budget. However, this is far from the limit of manufacturers' design ideas. Beds with unusual shapes and colors will transform the bedroom, giving it freshness and novelty.

For an interior in which features of the classic style are present, a model decorated with forged ornaments and grilles on the sides is suitable. The dark frame is combined with light bedding, pastel-colored walls and wood flooring.

The thickened base is completed with metal balls, a ladder with thin rods is welded on the side. The combination of heavy and lightweight components makes it possible to combine modern and traditional styles.

An interesting model, made in pink, cherry or lilac colors, is suitable for women's rooms, in the design of which a certain theme prevails. Decorations and other interior items are selected in similar colors, bedspreads and pillows of the indicated colors are placed on the bed itself.

Velvet, corduroy and other expensive fabrics can be usedthat will add luxury to the interior. Abstract patterns and plant motifs are placed on the sides of the bed as decorative elements.

Complementing the metal frame with wood paneling, you can get an unusual bed in a futuristic style. Variegated shades, strict forms, lack of decor - all this transforms the model. On the berth, pillows of contrasting colors are placed, holes are cut in the sides - both strictly verified and asymmetric. Above the upper tier, lamps and shelves will be appropriate. If you plan to leave the accent on the bed, lighter shades are taken to decorate the room.

For information on how to assemble a metal bunk bed, see the next video.