DIY furniture from OSB

Content
  1. How to make a wardrobe?
  2. Table making
  3. More ideas

OSB is a modern and practical material from which houses, outbuildings are built, used as decoration, and also used in furniture production. A variety of pieces of furniture are made from such panels. In this article, we will learn how you can make furniture structures from OSB sheets with your own hands.

How to make a wardrobe?

You can make a very reliable, convenient and beautiful cabinet from OSB sheets.

If you are puzzled by its design performance and take a responsible approach to work, then as a result you can get really exclusive, stylish furniture that will effectively decorate your home interior.

From the material in question, you can make both a fashionable wardrobe and a simpler swing model. Consider how to make the simplest version with swing doors with your own hands. To carry out the work, the home craftsman will need the following tools:

  • screwdrivers;
  • screwdriver;
  • drill;
  • nuts, bolts, nails;
  • hammer;
  • a set of keys;
  • electric jigsaw;
  • saw;
  • grinder;
  • nippers;
  • paper;
  • Ruler and pencil;
  • roulette;
  • iron;
  • Double-sided tape;
  • high quality adhesive solution.

Now we will analyze the step-by-step instructions for assembling a homemade cabinet from panels.

  • We need to think over the design of the furniture. Decide on the style and color, as well as the size. It is necessary to prepare a plan / drawing.
  • You should purchase beautiful and reliable fittings - handles, hinges, fasteners. The varnish will also come in handy for treating the cabinet.
  • OSB sheets must be cut in accordance with the required dimensions of the future cabinet. It is advisable to trim the edges of the cut parts by means of polyvinyl chloride tapes.
  • They are ironed with an iron, and all excess is cut off. After that, you should measure everything again, just in case.
  • Further, all the details must be correctly connected into a single structure using previously prepared drawings and diagrams.
  • First, they make a frame - a wall, side elements, a bottom and an upper half. They fasten everything with screws and bolts.
  • Fasten the structure carefully so that the OSB panels do not burst.
  • The back part is better made from fiberboard. It will be convenient to cut everything with an electric jigsaw.
  • If defects are noticed, they must be immediately corrected or hidden.
  • In order to install shelves in a homemade cabinet, you must first place the marks - this will allow all parts to be fastened as accurately and accurately as possible.

It's so very simple and quick to make a roomy wardrobe from OSB sheets. The main thing is to act carefully and carefully with respect to the material at every stage in order to get good results and not damage the workpieces.

Table making

You can make a solid and beautiful table from OSB panels. In assembly, such a structure will be very pliable and simple. All the work of the home master will take quite a bit of free time.

To build a high-quality table for the kitchen or another room in the house / apartment, the master will need the following components:

  • OSB sheet of the required size (for example, 100x80 cm);
  • legs (they can be made in advance from wooden bars or purchased ready-made beautiful balusters);
  • self-tapping screws;
  • furniture edge.

Let's consider in stages how to build a table with your own hands using OSB plates.

  • Prepare the legs for work. Sand them for smooth and neat surfaces. Cut the support pieces to the desired height setting.
  • Assemble the plank frame.It will be necessary to put the transverse parts to the balusters or bars, and then fix them with self-tapping screws. Thanks to this solution, the structure will be more reliable and stable.
  • Further, stepping back from the table top from the OSB panel 10 cm at the edges, it can be safely attached to the legs with self-tapping screws on special metal corners.
  • If the table legs are made of wood, they should be coated with a primer and paint of a suitable color. You can also resort to staining. It is better to close the sections of the OSB sheet with special tapes, for example, made of PVC.

If the tabletop has a rounded structure, then it is advisable to select flexible edges of the corresponding colors for it.

More ideas

It is possible to make many more different furniture designs from OSB panels. These can be comfortable and roomy racks, wall shelves, coffee tables, cabinets and even a full-fledged bar counter. Consider a few step-by-step instructions for making useful and functional pieces of furniture from OSB panels.

The easiest way is to make ordinary shelves on the wall from OSB. Such structures will not need additional finishing or processing. At the same time, a well-made shelf can easily serve for many years.

If one wall shelf is not enough, a home craftsman can craft an entire shelving unit. To build a rack from OSB boards, the master will need to make a metal frame to which they will be attached. In general, to carry out the work you will need:

  • dowel-nails;
  • screw and drill for working with metal profiles;
  • metal screws;
  • jigsaw;
  • drill;
  • screwdriver;
  • scissors for cutting metal;
  • roulette;
  • pliers;
  • metal profiles;
  • sheets of OSB (must be cut into separate parts, shelves of specific sizes).

The order of work will be as follows.

  • First of all, you need to draw up drawings indicating all dimensions of the future structure. In accordance with the dimensions, profiles are cut and shelves are cut from OSB panels.
  • First you need to install vertical metal posts. Horizontal profiles for shelves are placed on them. Next, the shelves are fastened with screws with a slight offset.
  • To make the structure stronger, you need to put both the central profile and the vertical stand in the center. The profile must be cut taking into account +25 mm on each side.
  • Bend sharp edges with a hammer.
  • Before attaching the shelves, the center of the cross section should be marked. The OSB-part is fixed by means of screws.
  • Next, you need to mount a profile structure to the wall in rows until the rack reaches the height planned by the scheme.

Beautiful and original country furniture is often made from OSB panels. For the foundation of such structures, frame bases are most often used, made of stronger, wear-resistant, but at the same time budgetary materials.

So, in order to build a cozy sofa for a summer residence, it is possible to use OSB sheets, wooden bars, as well as mattresses and pillows specially purchased or made with your own hands. All parts are marked out, cut in accordance with the shapes and sizes, and then fastened together into a single structure. Finished furniture can be decorated as you like.

From the material in question, you can also make a wonderful built-in wardrobe with sliding doors. Let's consider the stages of its assembly.

  • First, you need to design future furniture, make drawings and sketches of all the components.
  • Next, you need to transfer the drawing to the wall. This is one of the most important stages - the quality and resource of furniture will depend on it.
  • Then the pre-cut side partition and wall are installed. If the height of the cabinet is from stove to stove, then the shields must be attached directly to the ceiling, floor and back wall. If the structure is lower, then the component is attached to the roof.
  • Then they install pre-prepared shelves, boxes, rods.If it is planned to put removable shelves, then they must be installed using special fittings. If the fixation is rigid, then you need to use the corners. To make the design as reliable and strong as possible, it is recommended to resort to rigid fixation.
  • This is followed by the installation of sliding doors. Most often, it is these doors that are installed in the considered furniture modifications.
  • After that, you can start decorating OSB sheets. You don't have to resort to intricate decorations - it is enough to coat the surfaces with high quality colorless varnish.

It is not recommended to equip built-in furniture with hinged doors. In this case, it will not be possible to make a selection for the hinge fittings, and even such designs look less attractive and modern.

For information on how to make a do-it-yourself OSB rack, see the next video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture