All about removing stumps with nitrate

Content
  1. Peculiarities
  2. When should you use the method?
  3. What saltpeter is needed?
  4. Precautionary measures
  5. Step-by-step instruction

All owners of suburban areas try to keep them tidy. They clear the area from dry leaves, weeds, and remove stumps. Wood residues with roots deep in the ground can be removed not only by uprooting, but also by chemical methods. Quite often for this purpose they use saltpeter.

A preparation containing nitric acid salts, if used correctly, will provide the desired effect. The main thing is to understand the principle of its action, to understand how much to apply.

Peculiarities

Removal of stumps with nitrate allows you to get rid of tree carcasses without uprooting. The second method takes a lot of time and effort, so the first is more preferable. The chemical method of eliminating obsolete trees, or rather their stumps, is considered one of the most effective. The use of reagents with a powerful effect stimulates the destruction of dried trunks.

Saltpeter belongs to the group of nitric acid salt compounds. It is a small crystal that dissolves quickly in water. Ammonium and other types of nitrate are used to remove stumps, in addition, it serves as an effective fertilizer. With the help of it, plants are cultivated on private farms and in industrial agricultural complexes.

All types of nitrate - solutions in aqueous medium... During the heating process, they decompose and release oxygen. The latter quality makes nitrates explosive. Gunpowder is saltpeter. In appearance, colorless crystals resemble table salt.

When should you use the method?

With the help of saltpeter, both old and new hemp are burned. The destruction of tree carcasses by chemical means leads to the penetration of aggressive substances into the soil, which negatively affect the plants.

In order to increase soil fertility, effective methods of neutralizing toxic substances are used... Saltpeter is very effective against stumps, but most often it is used to eliminate tree carcasses in areas where it is planned to erect buildings for various purposes. In such cases, the ingress of chemical compounds into the soil does not matter.

Taking into account the fact of the impact of aggressive components on the soil, burning hemp in the territories with the help of saltpeter makes sense only when negative manifestations do not interfere in any way with subsequent work on the treated area.

Usually, chemistry is used to destroy wild plantings located next to buildings. Weeds are distinguished by an increased survival rate, they take root in various conditions. The mechanical way of dealing with them - uprooting, is not so effective, the weeds continue to grow, and the remnants of the roots form new shoots.

The chemical method of dealing with stumps is very effective, especially when it comes to diseased trees. The use of nitrate contributes to the destruction of pathogenic flora that is in the soil.

What saltpeter is needed?

Cleaning the site includes removing stumps; for this purpose, you can use different types of saltpeter:

  • ammonia;
  • potassium;
  • sodium.

It is better to use with ammonia, but potassium and sodium are also suitable. They will make it possible to completely burn out the wood skeletons.Saltpeter is poured into the remains of the tree, it causes its enhanced self-decomposition, turning it into dust. The hemp is destroyed completely and at the same time without decomposition.

Ammonium nitrate makes it possible to perform difficult workassociated with the removal of tree carcasses without much effort, save time on site clearing. Free up space for laying out the beds.

Precautionary measures

Ammonium and potassium nitrate are explosive flammable substances, special care must be taken when working with them.

Smoking is prohibited when working with such substances. For 1-3 months after placing the saltpeter in the stump, processes occur in the form of the synthesis of combustible gases. For this reason, starting a fire near a wood treated with chemicals is prohibited. In dry form, saltpeter is not dangerous, but it is recommended to use gloves when working with it.

To reduce the likelihood of a fire when burning wood carcasses, it is recommended to create an earthen embankment around the pit, the height of which is about 50 cm. You should always have a fire extinguisher and a hose connected to the water supply on hand - this will allow you to extinguish a fire that has begun far from the tree in a matter of minutes. Such fires usually occur due to sparks flying over a long distance.

It is unacceptable to stand on the leeward side of an ignited stump. Wood impregnated with nitrate synthesizes poisonous substances at the moment of combustion.

Some owners of suburban areas who decide to burn stumps even turn to the nearest department of the Ministry of Emergencies for permission to carry out such a manipulation. This avoids a large penalty for arbitrariness.

Chemically burning a tree stump is best done with saltpeter. Avoid using other substances, especially those containing glyphosate. They provide effective destruction of wood, allow you to get rid of roots, but do not decompose in the ground. They get into plants, and then together with the fruits - into the human body.

Step-by-step instruction

To destroy a stump from an apple or other tree on the site, remove it completely with saltpeter, follow the step-by-step instructions.

Hole drilling

The measure to remove the wood frame begins with drilling a hole. Follow certain instructions to destroy the stump, to ensure its complete destruction.

Saltpeter increases the flammability of the plant object. In the course of using such a reagent, the rhizomes ignite even from the slightest spark, therefore it is important to observe safety rules.

Using a drill, form 10-15mm holes in the cut trees.

If the trunk is damaged, it must be drilled, covering the entire perimeter. Make indentations at a distance of 5-10 cm.

When performing external drilling, observe an angle of 20-40 degrees - this will prevent the saltpeter crystals from spilling out of the holes.

Filling and capping

  1. Fill the grooves in the hemp with the chemical. The reagent is poured to the very top.
  2. Drizzle with water so that the reagent settles.
  3. Plug the holes with a plug (you can use clay or plasticine, make a wooden plug from a thick branch, ensuring it fits snugly).

Post-ripening works

Usually, the decomposition process under the influence of nitrate takes several months. After 1-2 years, dig in the stump and make a fire around it. Monitor the process to prevent the spread of flames to nearby plantings and structures.

During the maturation of the hemp, the soil around it will be enriched with nitrogen under the influence of chemicals. This will contribute to the increased growth of ornamental crops, will allow you to get a good harvest. But only if the plants are planted at a distance of 4-5 meters from the zone treated with the reagent.

Saltpeter will provide complete disposal of hemp on the site, make it suitable for growing useful plants and building. The chemical method cannot become a full-fledged substitute for uprooting, but it is the most reliable method of dealing with wild plantings and root infections.

See the result of removing the stump with ammonium nitrate in the next video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture