How and from what to make ceilings on the balcony?

How and from what to make ceilings on the balcony?
  1. Requirements for the balcony and materials
  2. Balcony waterproofing
  3. Thermal insulation of the balcony
  4. What is it made of and which one is better?
  5. Painting options
  6. Stages of work

Today, balconies are used not only as compact warehouses for various things, but also as full-fledged living rooms. To beautify such a room, it is necessary to turn to high-quality and beautiful interior decoration. Various materials can be used to decorate floors, walls and ceilings. The last element is worth talking about in more detail.

Requirements for the balcony and materials

The cladding of the ceiling slab on the balcony is not too laborious and takes a little time. It is recommended to refer to such materials, the color and texture of which will look harmoniously in the overall ensemble with furniture and decor. Typically, the ceilings on standard balconies are small.

They must meet some important requirements:

  • If we are not talking about the decoration itself, but about the ceiling, then waterproofing plays a very important role here. Leaks and condensation should not penetrate into the interior of the balcony room and spoil the interior decoration. Over time, such deficiencies can lead to mold and an unpleasant odor of dampness. If you do not waterproof the balcony, then even the most expensive repairs will not save the room from noticeable deformations. Walls and floor coverings can bulge and crack, and permanently lose their attractive appearance.
  • If you plan to operate the balcony room all year round, it is recommended to pay special attention to the thermal insulation of the ceiling. Typically, warm air rises to the top, so a cold ceiling tile can cause a temperature drop.

It makes no sense to keep any heaters or other similar heating systems in areas without insulation. You will simply overpay for the consumed electricity, but you will not achieve the desired result.

But if you are not going to glaze the balcony block, then there will be no sense in the ceiling insulation. Only waterproofing will remain a prerequisite.

Material requirements are simple and feasible:

  • First, they must be in harmony with the general style of the room and the furniture that is present in it. It all depends on personal preferences and tastes. Today, you can pick up a variety of options, from inexpensive painting to installing interesting suspended structures.
  • All materials must be of high quality and durable. It is not worth saving in this matter, since low-grade finishes will not last long and can cause a lot of inconvenience.
  • If the balcony is open, then it is not recommended to choose a finish that is afraid of water and temperature extremes. She will quickly lose her attractiveness and will have to be changed.
  • The cladding must be environmentally friendly and safe. Often there are materials that, under the influence of high temperatures, emit toxic harmful substances that are harmful to health. Such options should be discarded.

Balcony waterproofing

Waterproofing is required for both closed and open balconies. Without it, water can enter the room, which will lead to damage to the interior decoration.

As a rule, droplets flow into the seams on the facade or seep through the ceiling.

The process of installing waterproofing will be easier if the balcony on top is glazed and insulated.Then you can pour silicone sealant into the seam separating the wall and the ceiling, and treat the surface of the latter with a special hydrophobic agent.

But if the balcony of your neighbors is cold and not glazed, then you should try to negotiate with them and find out the technical condition of the adjoining part. If it does not require major repairs, then you can proceed as in the first option. Otherwise, it is necessary to put in order the neighboring balcony block, since without this condition no sealant will save the room from moisture.

Upper balcony blocks in typical buildings require waterproofing on both the top and bottom of the concrete slab.

The top can be insulated with roofing material together with the roof. This work should be done by professional roofers. If you want to do everything with your own hands, then you will need to go down to the slab from the roof, for which you often need permission from DEZ.

Waterproofing is required for the balcony ceiling slab. Concrete itself has a porous structure, so moisture can easily seep into it. It passes through such material, stands out through the ceiling and spoils the interior decoration.

The saddest ending can be the corrosion of the reinforcement in the balcony slab. Over time, this will lead to an emergency state of the room.

Suitable materials for roof waterproofing are PVC membrane, bitumen mastic and liquid rubber. The most expensive option is PVC membranes. They are distinguished by their durability and excellent performance.

If your neighbors' balcony is cold or not at all, then the ceiling should be insulated. The meaning of such work is only if the balcony block is glazed.

The largest percentage of heat loss occurs through the ceiling slab, and high-quality thermal insulation materials easily solve this problem. It is worth noting an additional property of such heaters: they have sound insulating properties.

Thermal insulation of the balcony

Balcony rooms are insulated from the inside. To do this, you can purchase both roll and tiled options. The most popular are the following types of insulation:

  • Expanded polystyrene;
  • Penoplex;
  • Basalt wool;
  • Foil-clad PPP.

Such materials are installed using frames. The bases can be wood or metal. NSA waterproofing layer (film) is first applied, and then the insulation itself:

  • Basalt wool is sold in the form of slabs. After installation, they must be covered with a special vapor barrier membrane. This is necessary so that condensation does not collect inside the insulation, because such a material is hygroscopic and loses a large percentage of its heat-insulating properties in its wet state.
  • The popular PPP or penoplex can be installed with or without a frame. The slabs or sheets are attached to the ceiling slab using special and reliable adhesives. The frame method of installation is more convenient, especially if you plan to do panel cladding of the balcony.
  • A more expensive insulation is liquid polyurethane foam. It is applied very quickly by spraying. Polyurethane foam penetrates into all crevices and holes, forming an even layer with excellent sealing. For this type of insulation, no waterproof or vapor barrier films are required. All you need is the material itself (PPU) and a special spray gun.

What is it made of and which one is better?

After completing all the preparatory work, you need to proceed to the choice of interior decoration of the ceiling. Today there are many options for the design of this element. Let's consider the most popular ones.

Lining

The lining has an excellent appearance. This material is woody and environmentally friendly. With the help of lining, you can finish both a closed and an open balcony block.This material is durable and has excellent sound and heat insulating characteristics.

Installation of such panels is not difficult and time-consuming.

PVC panels

The most popular and inexpensive option is PVC panel sheathing. Plastic panels can be attached to the board using adhesives or a frame. Lamps can be built into such material, but for this it is necessary to make holes for them in advance. Such a sheathing is not afraid of dampness, moisture, temperature changes and exposure to ultraviolet radiation.

The plastic ceiling can be washed with normal detergents. Over time, it will not lose its attractive appearance.

Rack ceiling

The rack and pinion design of the ceiling on the balcony is also popular. For example, aluminum specimens can be installed both indoors and outdoors. Such structures are distinguished by high reliability, strength and durability. They are easy to install and do not affect the height of the balcony in any way.

There are not only rack, but also cellular and panel finishes. Cellular are installed on suspensions and outwardly resemble a monolithic surface with square cells. Paneling is ideal for long rooms.

Drywall

Plasterboard is suitable for decorating a closed balcony. It has a low price and is easy to process. This option can be conventional or tiered. With the help of drywall, a suspended ceiling is made, which can be sheathed with absolutely any material.

Stretch ceiling

Stretch ceilings look expensive and luxurious. They have excellent sound insulation. Modern manufacturers offer designs in a wide variety of colors. You can meet not only plain, but also original glitter ceilings.

It will be very difficult to do the installation of such a finish on your own. It is recommended to contact a specialist who has all the necessary equipment in his arsenal for the safe and high-quality installation of a stretch ceiling.

Ideas for decorating the ceiling on the balcony are in the next video.

The choice of the ideal ceiling finish for a balcony depends on the condition of the room, its purpose and the personal preferences of the owners. If the balcony is open and not glazed, then you should turn to lining or plastic. Such materials are not subject to deformation and they are not so afraid of negative environmental factors.

Almost any design option is suitable for a cozy glazed balcony. Choose materials that will blend in harmoniously with the overall style of the room.

Painting options

For an open balcony, facade paint is suitable. Before applying it, you need to putty the ceiling and wipe it to a smooth surface, as in other finishing options with paint and varnish coatings.

Water-based paint will be a good choice. It is better to choose white as it is neutral and does not visually diminish the space.

In a warm balcony, you can turn to ordinary paint for interior work.

Stages of work

Consider the stages of finishing a balcony slab using the example of drywall:

  • First, a frame is created on a base from a profile. On the ceiling, this structure must be fixed with hangers.
  • Then you need to insulate the base: tightly fill the space above the frame so that there are no gaps.
  • The next step is to install drywall. This work is carried out using a screwdriver and self-tapping screws.
  • The final stage will be the finishing of the resulting surface. Plasterboard ceiling can be painted or sheathed with any panel.

All stages of installation of such a ceiling are very simple and do not take much time.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture